enjoyable as ever love that you waited for the green one and, even though the install HAD to be ASYMMETRIC because of the bar thickness.... it looks incredible well done thanks for the wonderful video
Hey Krak u should do moto vlogs with the benelli i really enjoy your riding videos while chatting away. Im sure everyone else would also. Keep up the good work!
I'll get back to doing motovlogs and yes, there will be many on the TnT 135. We're in another snow storm here in VA again but spring is right around the corner.
Thanks, ordered this screen today as I just purchased the same bike/color. Also just got a Kymco spade. Already have a Z125 so looking forward to comparing the three.
Yes, without seeing them I narrowed it down to the Spade or TnT. Purchased the Spade. 2 days later saw ths green Benelly in person. I purchsed it on the spot! Stunning on the showroom floor. Love the channel. Keep it up!
The only ones I used were those cheap Aliexpress Chinese ones I showed in a video. I cannot recommend them as it took an a lot of work to get them to work. Somewhere in the world, Benelli makes accessories for your bike. I never could find a source to order from.
It's almost impossible to not go over 6k rpm during break-in or you'll get run over. My advice is it's okay to go over from time to time. Do not sustain a long run over 6,000 rpm during break-in. What happens is your over-working the engine while the parts in the motor and Trans are wearing in. After 600 miles, ride as fast as you wish but try to vary the speeds up to 1,000 miles. Good luck!
I'm a 190 cm tall and my seat is killing mine as well. For long rides I would recommend an Air Hawk cushion. Google them and the key to them is just barely inflate them to get your butt off the seat. Thanks for stopping by. Eric
Most of the items on Amazon are inexpensive Chinese items that are low in quality. There's nothing wrong with that but just know you will be replacing them often as they don't put up with much abuse.
Again check this forum. There's downloads that Alex has posted for OEM parts. facebook.com/groups/officialbenelligroup/?multi_permalinks=4812754198755729%2C4808943062470176%2C4802916309739518%2C4796104340420715%2C4794651910565958¬if_id=1632836920460461¬if_t=group_activity&ref=notif
Puig 5881V - V designates green. amzn.to/31F1qXJ It's linked in the description as well. I had to oder overseas and it took 3 weeks mot get but worth it. Good luck!
Little screen looks good but in all honesty sitting over a tiny pit sized bike I can't see a screen making any difference with wind noise ..more cosmetic than practical
I love the windscreen!
I've had a few say they don't like it. It helps me quite a bit to slip in the wind. If you need a link to one, let me know and thanks for watching.
Trully enjoying the videos and they have really helped me out. Would you be able to send me the link to the windscreen you purchased.
Here you go. They only have 1 left in stock. amzn.to/3M5TeGE
"I had a feeling she was gonna call the bingo police on me" hahaha gonna use that if you don't mind!
Help yourself 😂😂😂 thanks for commenting.
enjoyable as ever
love that you waited for the green one
and, even though the install HAD to be ASYMMETRIC because of the bar thickness.... it looks incredible
well done
thanks for the wonderful video
Thank you for watching.
Thanks Eric, Great review; that Puig looks good. Keep’em coming.
You're most welcome!
🏍💨 🚓💨
Really like the new windshield, Eric!!👍👍
Thanks! 👍
I'm glad you are enjoying it I have a 2017 Z125 pro and would have bought this had I known it 3 years ago.
Alex, thank you for watching and stopping by to share your thoughts. Many more video coming on the TnT 135.
Hey Krak u should do moto vlogs with the benelli i really enjoy your riding videos while chatting away. Im sure everyone else would also. Keep up the good work!
I'll get back to doing motovlogs and yes, there will be many on the TnT 135. We're in another snow storm here in VA again but spring is right around the corner.
Another great video with Eric humor. Love it brother
Thank you Rob! 😎
Thanks, ordered this screen today as I just purchased the same bike/color. Also just got a Kymco spade. Already have a Z125 so looking forward to comparing the three.
Glad this video was helpful for you. I have to say I live this green. It just pops! Eric
Yes, without seeing them I narrowed it down to the Spade or TnT. Purchased the Spade. 2 days later saw ths green Benelly in person. I purchsed it on the spot! Stunning on the showroom floor. Love the channel. Keep it up!
What waterway you passing by on your ride? Love your videos.
Willie, that is Lake Anna in VA. Thanks for stopping by. Eric
I ordered some acerbis handgaurds they won't work on the brake side. Any recommendations that will fit with minimal engineering.
The only ones I used were those cheap Aliexpress Chinese ones I showed in a video. I cannot recommend them as it took an a lot of work to get them to work. Somewhere in the world, Benelli makes accessories for your bike. I never could find a source to order from.
Hey Eric, on my new bike it says not to go over 6,000 rpms until I’ve ridden 622 miles
What happens if I do go over?
It's almost impossible to not go over 6k rpm during break-in or you'll get run over. My advice is it's okay to go over from time to time. Do not sustain a long run over 6,000 rpm during break-in. What happens is your over-working the engine while the parts in the motor and Trans are wearing in. After 600 miles, ride as fast as you wish but try to vary the speeds up to 1,000 miles. Good luck!
@@KrakensGarageandAdventures thank you so much!!!
Hi thanks for you review. How tall r u? By the way im 182 and the my tnt 125 is killing my butt. Any recommendations on a seat upgrade?
I'm a 190 cm tall and my seat is killing mine as well. For long rides I would recommend an Air Hawk cushion. Google them and the key to them is just barely inflate them to get your butt off the seat. Thanks for stopping by. Eric
@@KrakensGarageandAdventures thanks again
i will look for that seat pad.
Do they have a stretch kit for this Benelli
They do I believe it's sold in Taiwan. Check out the Facebook Benelli TnT 135 group and folks there will get you fixed up.
How about the foot pegs from Amazon
Most of the items on Amazon are inexpensive Chinese items that are low in quality. There's nothing wrong with that but just know you will be replacing them often as they don't put up with much abuse.
What model of windshield is it? Puig ?.
Yes, Puig and I can post a link if you wish? Thanks for stopping by.
Do you know where you can get a belly pan or a lower fairing whatever it's called for the Benelli TNT 135
Again check this forum. There's downloads that Alex has posted for OEM parts. facebook.com/groups/officialbenelligroup/?multi_permalinks=4812754198755729%2C4808943062470176%2C4802916309739518%2C4796104340420715%2C4794651910565958¬if_id=1632836920460461¬if_t=group_activity&ref=notif
Great channel
Thank you!
Link to order the same one? I can’t find it anywhere?
Puig 5881V - V designates green.
amzn.to/31F1qXJ
It's linked in the description as well. I had to oder overseas and it took 3 weeks mot get but worth it. Good luck!
Thank you greatly! Had to have it the second I saw you unbox it.
@@kennethstepp6451 right on, can't wait to see it when you get it on! Maybe post a pic on my Instagram
@@KrakensGarageandAdventures will do. Just found n followed ya.
Little screen looks good but in all honesty sitting over a tiny pit sized bike I can't see a screen making any difference with wind noise ..more cosmetic than practical
@boomerhgt you are spot on, it's mostly for aesthetics.
Not that I want go all grammar natzi on you but I think it's pronounced "pweeg".
Thank you! I knew I was pronouncing it wrong so I just took a stab at it. I appreciate the correction.