I just want to point out how cool and awsome you guys are to work with! I love how you back your product and when i have had to call and have something replaced or any thing the Reps was super friendly and they took care of everything i needed so i am a customer for life! We have a youtube channel and we will be doing a bunch of super postive shout out's to spectrum!
I have two XPWR 35cc motor and I can not get it to run on full power with out the motor stuttering or searching on and off when is on full throttle. when is running on 70% power is ok..I am using a Avion 120 Hv ESC.. I tried everything with timing from 5 low .15 mid and 30 high with soft start and normal start and is still doing the searching and stuttering thing when is above 70% power..I have also tried different new batteries Rating from 60c to 100c..dose it need updated different firmware or could it be something else? Oh I also have two of the Avain and two of the xpwr 35cc motor and they are both doing the same!! Please please help! Regards Dan Porter
Can you confirm how the firma 150 firmware deals with thermal cutoffs?.. Both for the esc and the capacitors... does the firmware activate brake? Or neutral/coast?..
I can't get it to display the firmware on firma 160 😢 Its just a blank tab. I can change the settings on esc and can update my card but cant get anything in the drop down menu for firmware updates
Hi after I update the firmware of the 150A ESC on my Kraton 6s V5 to version B2.21. The proces of update completed successfully(I got the update complete successfully screen) . Now I have a problem, I power on the kraton and the steering starts to turns left and right very fast by it's own without touch the controller(tx). Is like it is glitching. Any idea? Thanks
My brand new 160amp 8s esc and 1250 motor combo is messed up. The esc has 150amp programming installed on it. Messing me up big time. What do I do here?
I guess dont use it first and then redo the steps and download the 160amp update which should remove the 150amp update and change it tl 160amp software
I mead the update to firmware B4.12 to the ESC but what am confused all default was changed to another default setting like the voltage it was 6.0V and now it’s 8.4V and cutoff voltage some of but what am confused watch support vide for my kraton 8S that no need to pump up the voltage as default 6.0V To 8.4V after update to B4.12 it’s pump up to 8.4. As default settings!!
@@SpektrumRCvideos ok cool cause i have the 85 a and the 130 a coming .. my question is i am trying to bind the 85 a esc to my dxc and im following the instructions and waiting for the beeps but nothing .. is there a way to reset this esc or is it in program mode ... its brand new so i got the steering binded with the spectrum 6100 receiver but not the speed control ...
Hi I have a question I just pick up the spektrum programmer and I see that it has the lastest firmware but when I try to use the programmer directly on my RC car (arrma felony), the programmer says to update software on the screen and won't let me do anything else. Again this is me plugging the programmer directly into the car, I get that message on the programmer screen. And I missing something
@@SpektrumRCvideos I have the same issue with my Firma 150. I have updated both the ESC and the Programmer but when i plug the programmer straight in to the ESC it says "update software" and wont do anything else. Yes, i can program it via the PC app but this is no good while out and about. PC app version is 1.0.4, database is 04-12-2019, Programmer is version 3.2.39 and ESC version is B2.12.
Does anyone know if you can use this program box for Hobbywing ESCs (with Hobbywing software) too? Spektrum's program box looks identical to Hobbywing's 🤔 I'd rather not have to buy two
@@06freightshaker HW and Spektrum boxes/ESCs/software aren't compatible at all. I tried using the HW multifunction program box with a Spektrum Firma 150A ESC. It doesn't recognise the ESC at all when in the ESC port, and with either HW or Spektrum software on PC You have to use Spektrum for Spektrum and HW for HW unfortunately
@@yaffajaff yea comsletely true, the hardware may look the same as they technically took hobbywing stuff and make it look a bit different and rebrand it, they also mostly reprogrammed it and put their own system on it, so you can get the best of both worlds, the hobbywing reliabilityand quality and also spektrum smart stuff and good prigramming so it makes spektrum electronics the easiest to use and most reliable out there
I followed this step by step and the ESC wont svae the update. The Box Keeps stating to Upgrade the Software. What am I missing? Very confusing to use. Ill just go back to the Lovely Beeps!
Hi, im not from spektrum but the box asking you to upgrade the software has nothing tk do with yoyr eac or anything in the video, its just that you need to unplug your esc but do the same thing and go to the same oage and you should find a place where it gives you an option to update the program box only
It is the voltage that goes to yoyr receiver and servo and accessories that is connected to the receiver, i recommend the stock bec voltage because not all devices connected to the receiver can support 8.4v, they will either fry themselves or go wild, and even if they can, it will decrease their lifespan so yea
I'm getting this message when I try to upgrade the firmware on the Esc. Upgrade operate fail,Please try again!(Hash1 Error.) Upgrade software(Version B5.01)... Current firmware is B1.55, the esc is SPMXSE1130. Hardware HW451C_KZ1_V1.11
Hey when are u guys coming out with a new dx6r the one with the wheel the land remote . And why y’all discontinued it out of no were . Alot of people are so upset
Well it is hard not to discontinue anything out of no where... It was simply a supply chain issue and it was at the end of its life. That being said we are always working on something new! Also I would suggest looking at the DX5 Pro. It is just as capable, transmitter wise, without the Android connectivity. AND if you happen to be lucky enough to find a 6R on the market, be assured that we will continue to support it for the foreseeable future. Thanks!
SpektrumRC what u mean at end of its life . U mean u couldnt get the parts for it anymore, are u saying the remote have ran it course cause i see people still wanting them and looking for them as of right now u know . But i have one ☝🏿 and a 7px but i like the spectrum better. U said dx5r pro but it is not like the 6tho boss . And thanks for the reply
I did everything you said now my programmer box don’t connect to my esc just a whole bunch of blocks on screen never got it to recognize the pc can’t do anything now but check lipo cell count
Man! That Sucks!! B/c I Don't Have Neither, A Computer Or A Lab Top.. So I'm Guessing, Shit Outta Luck..!!😬 & I Just Purchase A New ESC & The Program Card.. Is There Any Why To Bypass It Without Using A Computer? B/c When I Plug The Program Card To The ESC, It Says Needs To Update...🤦
Does the Firma Smart ESCs Programming Update Box work on Arrma ESC's like come in the Notorious and Typhon?
The same thing keeps happening to me I can't figure it out
I just want to point out how cool and awsome you guys are to work with! I love how you back your product and when i have had to call and have something replaced or any thing the Reps was super friendly and they took care of everything i needed so i am a customer for life! We have a youtube channel and we will be doing a bunch of super postive shout out's to spectrum!
Wow, new firmware for these makes my 130 feel like a sensored set up. Good job.
I have two XPWR 35cc motor and I can not get it to run on full power with out the motor stuttering or searching on and off when is on full throttle. when is running on 70% power is ok..I am using a Avion 120 Hv ESC.. I tried everything with timing from 5 low .15 mid and 30 high with soft start and normal start and is still doing the searching and stuttering thing when is above 70% power..I have also tried different new batteries Rating from 60c to 100c..dose it need updated different firmware or could it be something else?
Oh I also have two of the Avain and two of the xpwr 35cc motor and they are both doing the same!! Please please help!
Regards Dan Porter
Can you confirm how the firma 150 firmware deals with thermal cutoffs?..
Both for the esc and the capacitors... does the firmware activate brake? Or neutral/coast?..
Can the program box be used to update the DX5C?
Not sure if you ever figured it out but the Bluetooth adapter will allow you to update the controller.
I can't get it to display the firmware on firma 160 😢 Its just a blank tab. I can change the settings on esc and can update my card but cant get anything in the drop down menu for firmware updates
How do you program the fan on the 160a firma smart esc? or does it turn on by itself once the ESC temperature reaches a certain limit
I'm new to this. Is this something that we have to do?
Hi after I update the firmware of the 150A ESC on my Kraton 6s V5 to version B2.21. The proces of update completed successfully(I got the update complete successfully screen) . Now I have a problem, I power on the kraton and the steering starts to turns left and right very fast by it's own without touch the controller(tx). Is like it is glitching. Any idea? Thanks
I have a timberx night with a 8010t rx
How can i use the reverse thrust function. My channel 7 is already in use
My brand new 160amp 8s esc and 1250 motor combo is messed up. The esc has 150amp programming installed on it. Messing me up big time. What do I do here?
I guess dont use it first and then redo the steps and download the 160amp update which should remove the 150amp update and change it tl 160amp software
I mead the update to firmware B4.12 to the ESC but what am confused all default was changed to another default setting like the voltage it was 6.0V and now it’s 8.4V and cutoff voltage some of but what am confused watch support vide for my kraton 8S that no need to pump up the voltage as default 6.0V To 8.4V after update to B4.12 it’s pump up to 8.4. As default settings!!
Can you use a Chrome book for the updates? Other than that we have all Mac computers
Honestly not sure! I am not familiar with chrome books. You may need some sort of windows emulator?
can the SPMXSE1085
Firma 85A Brushless Smart ESC, 2S be updated or it has to be 130,150,160
Yes it can BUT currently there are no updates available... Yet ;)
@@SpektrumRCvideos ok cool cause i have the 85 a and the 130 a coming .. my question is i am trying to bind the 85 a esc to my dxc and im following the instructions and waiting for the beeps but nothing .. is there a way to reset this esc or is it in program mode ... its brand new so i got the steering binded with the spectrum 6100 receiver but not the speed control ...
When will this be available for Avian ESC's? I have a 30 amp, 45 amp, and 80 amp Avians.
Soon! We are finalizing a BIG update and will have a video to accompany that :)
I can’t update the Link to the update I’m trying to do what you are doing but it won’t let me open the link for the 150 esc
www.spektrumrc.com/ProdInfo/Files/Firma_ESC_Open_Stock_Smartlink_app_and_updater.zip
Hi I have a question I just pick up the spektrum programmer and I see that it has the lastest firmware but when I try to use the programmer directly on my RC car (arrma felony), the programmer says to update software on the screen and won't let me do anything else. Again this is me plugging the programmer directly into the car, I get that message on the programmer screen. And I missing something
using the same PC programmer app you should be able to update just the programmer box when connected to just the programmer. Hope that helps!
@@SpektrumRCvideos I have the same issue with my Firma 150. I have updated both the ESC and the Programmer but when i plug the programmer straight in to the ESC it says "update software" and wont do anything else. Yes, i can program it via the PC app but this is no good while out and about. PC app version is 1.0.4, database is 04-12-2019, Programmer is version 3.2.39 and ESC version is B2.12.
@@isnips909 same issue here.
@@SpektrumRCvideos same issue here, how do you fix this issue..thanks
Does anyone know if you can use this program box for Hobbywing ESCs (with Hobbywing software) too? Spektrum's program box looks identical to Hobbywing's 🤔 I'd rather not have to buy two
I'd like to know to even the software looks identical to the hobbywing stuff
@@06freightshaker HW and Spektrum boxes/ESCs/software aren't compatible at all. I tried using the HW multifunction program box with a Spektrum Firma 150A ESC. It doesn't recognise the ESC at all when in the ESC port, and with either HW or Spektrum software on PC
You have to use Spektrum for Spektrum and HW for HW unfortunately
@@yaffajaff yea comsletely true, the hardware may look the same as they technically took hobbywing stuff and make it look a bit different and rebrand it, they also mostly reprogrammed it and put their own system on it, so you can get the best of both worlds, the hobbywing reliabilityand quality and also spektrum smart stuff and good prigramming so it makes spektrum electronics the easiest to use and most reliable out there
Why does this need doing please does it give more of something’s or just smooth things out someone said his 100 now feels like a 130esc
I followed this step by step and the ESC wont svae the update. The Box Keeps stating to Upgrade the Software. What am I missing? Very confusing to use. Ill just go back to the Lovely Beeps!
Hi, im not from spektrum but the box asking you to upgrade the software has nothing tk do with yoyr eac or anything in the video, its just that you need to unplug your esc but do the same thing and go to the same oage and you should find a place where it gives you an option to update the program box only
Does it have to be disconnected from the motor and receiver to do this?
No
What is the BEC set up/option?
It is the voltage that goes to yoyr receiver and servo and accessories that is connected to the receiver, i recommend the stock bec voltage because not all devices connected to the receiver can support 8.4v, they will either fry themselves or go wild, and even if they can, it will decrease their lifespan so yea
I'm getting this message when I try to upgrade the firmware on the Esc. Upgrade operate fail,Please try again!(Hash1 Error.)
Upgrade software(Version B5.01)... Current firmware is B1.55, the esc is SPMXSE1130. Hardware HW451C_KZ1_V1.11
I bought an AR636B receiver and I can't activate the as3x technology, I don't know what values to put who can help me
Check out our AR636 how to playlist :) or even the one that Horizon did with Ali ua-cam.com/video/9lufZv72Ino/v-deo.html
Hey when are u guys coming out with a new dx6r the one with the wheel the land remote . And why y’all discontinued it out of no were . Alot of people are so upset
Well it is hard not to discontinue anything out of no where... It was simply a supply chain issue and it was at the end of its life. That being said we are always working on something new! Also I would suggest looking at the DX5 Pro. It is just as capable, transmitter wise, without the Android connectivity. AND if you happen to be lucky enough to find a 6R on the market, be assured that we will continue to support it for the foreseeable future. Thanks!
SpektrumRC what u mean at end of its life . U mean u couldnt get the parts for it anymore, are u saying the remote have ran it course cause i see people still wanting them and looking for them as of right now u know . But i have one ☝🏿 and a 7px but i like the spectrum better. U said dx5r pro but it is not like the 6tho boss . And thanks for the reply
I did everything you said now my programmer box don’t connect to my esc just a whole bunch of blocks on screen never got it to recognize the pc can’t do anything now but check lipo cell count
Make sure you are connecting to the esc correctly, polarity wise
Man! That Sucks!! B/c I Don't Have Neither, A Computer Or A Lab Top.. So I'm Guessing, Shit Outta Luck..!!😬 & I Just Purchase A New ESC & The Program Card.. Is There Any Why To Bypass It Without Using A Computer? B/c When I Plug The Program Card To The ESC, It Says Needs To Update...🤦
Your own Technicians didn't even know how to do this so their answer was to hang up on me.
Wow. That’s a lot to do...
good video but painful watching you trying to plug things in one handed :) x
I would seriously avoid any spektrum equipment, the firma esc's are utter crap. Buy a roller and put your own electronics in. Never again.
Is there anyway an update is keeping it from turning on and beeping off cells?