Thank you so much. We were gifted the same pool in like new condition. No instructions so I couldn't figure out what that extra piece was for. Going to add it in the morning and see if the pump works properly.
Thank you for your comment.. Achieving a higher water quality and during hot periods helps to help a good water quality in your pool. Always keep your pool clean with chlorine and watch your PH value. After signe oxygen supply should help you to use less chemicals in your pool. However, this is not documented. But if nothing else, it makes the water very soft and comfortable.
Sir, the small black plug is not for that return hole. It is to put over the air inlet for stopping aeration when you want it to act as a normal jet. The 2 big plugs you have that come with the pool are the correct ones for return and inlet and they go under that big cap that screws of. Hope this helped somebody just like your video, and sorry for my poor english btw
Thanks for your comment, you write an excellent and understandable English. I was not aware that the plug could also be used to stop air supply. When I received the kit, the plug was in the outlet nozzle. I show this method, rather than using the black plugs that come with the pool. I thought the plugs easily fall out. Thank you for your help and comment.
Thank you, mine was in the nozzle as wel straight out of the box. But i have seen a couple of official intex pictures where it was on the air intake so that is how i know 😁 not an expert but i stumble upon it
Your silence speaks volumes lol. Very educational video. Straight to the point not like other videos I see people who ramble on about irrelevant crap. Thanks 👍
Do I open the valve like loosen it a little bit when I’m running my sand pump or do I leave it closed idk what the valve is used for lol I’m new to pools
I want to thank you so much for your advice I was so upset and discouraged when the pump came in the mail and the pice wouldn’t fit in the hole it’s all about money for these companies but you have to be creative and innovative on keep from getting ripped off thank you from New York
Thank you for this information I did this before your tutorial and the whole thing come off and drained half my pool while I was out! That clamp is not so clear in the instruction manual 😭😭😭😭
I´m sorry, what is the function of the adapter? What is it for? I bought a new pump and in the instructions this adapter is like an optional, I don´t now if i should try it or not. Thanks!
You can add more oxygen to your pool with this adapter. On 38 mm intex bats and connection, they are today standard. Gives a more comfortable and soft water jet at your exit to the pool.
I've got exact same pool. I thought the inlet strainer that you pulled out from inside pool is glued or stuck to pool❓I'm concerned it will rip a big hole if I pull it out❓Mine seems to be molded to pool, however I may be wrong.
@@MortenWork Ok finally got my pool packed away for winter. I was able to just pull out strainers and replace with new system easily. I did find out that black plug is only used to stop the water flow during assembly. Other then that you don't need it. Thanks for great video
You add more oxygen to the water and, according to the manufacturer's instructions, save on chemicals. A bit the same if you use oxygen tabs in your pool.
Omg you're video just saved my ars lol VERY frustrated viewer here and YOUR video was the ONLY 1 I effin had to watch!!! of course I didn't watch it 1st which sucks but hey THANK YOU SO MUCH!!!!
Do you have any idea if this kit will work on Krystal Clear pump 330 GPH?? i've been looking for this kit on amazon and cant find it. Cheers From a Nicaraguen!!!
Hi and thanks for your question. The set here fits Intex filter pumps with 32 mm hose connection. I have used the set together with a Sandfilter pump with a capacity of 15,000 liters per. hour. I bought sets here for 300ghp: www.eurotoys.dk/product/Pool_Inlet_Air_Nozzle_Set_For_300Gph_Pum_Intex_Reservedele_12351.asp?site=76&vn=101-012351 og her for 500ghp: www.eurotoys.dk/product/Pool_Inlet_Air_Nozzle_Set_For_500Gph_Pum_Intex_Reservedele_12352.asp?site=76&vn=101-012352
@@Knights4ever83 I’m in the same boat trying to make this work with a different sort of pool. I think the black part is part of the pool wall itself. Would be helpful to find something to make the pieces fit snugly in the side of a pool not made by intex/without holes pre-made.
Gracias x como conectarlo lo q no entendí en el funcionamiento de la perilla si va cerrado o abierto cual es la diferencia xq de las 2 formas veo igual el caudal de agua gracias x mostrar saludos desde argentina
la valvula que va hacia arriba (la pieza cilindrica que enrrosco ala pieza grande) es la que provee de aire ala piscina. ahora si te referis al tapon negro, es solo para no regar agua al retirar la manguera y conectar el aereador. Saludos de Nicaragua!!!
Nice vid to start. Question for you or anyone watching this video. Will this work for a 22' x 52" pool with a 75D Game sand filter & pump. The pump is a 3/4 hp.
Tak Morten, was scratching my head about how to fit this, got it fitted now. I don't have all those air bubbles coming out of mine though, do I need to do something else to get those coming through? I just have the jet, no difference than without fitting the air adapter.
duffymoony Try opening the air valve a little bit more to allow more air to come in. The whole concept of the outer peace is so that way that additional top screw which is what gives air
Help...I'm unclear what this adapter does..❓.do I need it❓it came with the new pump...but my pool is smaller...being used more like a hot tub..350gal..thx
@@MortenWork just wanted to know if I really needed the adapter...guess not...overkill for a smaller pool or hot tub...thx...that's black cap thingy is cute tho, huh ❓👍
Hello, at this moment in Argentina it is summer and luckily I found your video explaining exactly what I needed, thank you very much.But ......... I have a problem, I have an element of one body, let's say a "mouthpiece" for giving it a name. Obviously it is not of the upper connection that you just showed. Therefore I ask you a favor, if you can show how the parts of the lower connection are mounted, since I have left over this "mouthpiece". Showing how the lower connection elements are connected is sufficient, since this "nozzle" does not fit anywhere. Thank you.
Hola, si es por cómo van las piezas fijate que podés descargar el manual de usuario. Me regalaron uno de estos pero no sé si servirá para piscina de cemento
Do you know if the screens are supposed to suck in the water with pressure, my pump works but both the screens feel like they aren’t sucking any water in??
if u take out the 'screens' and put ur finger in the whole u will fill it is sucking...if u have a small pool , 8 ft, try just one 'screen' and close the other one. I'm guessing with screen you mean the suction holes? thanks
I have the same pool i have all the stuff that you showed on the video but the jet or whatever the name is doesn't go all the way i push hard enough but the part that goes inside the pool is not flush i guess the part that goes inside its too long..
Achieving a higher water quality and during hot periods helps to help a good water quality in your pool. Always keep your pool clean with chlorine and watch your PH value. After signe oxygen supply should help you to use less chemicals in your pool. However, this is not documented.
@@MortenWork Mine used to work, and now after taking it out a few times to clean the pump is not giving me bubbles no more..is it some sort of pressure that it lost from the rubbers?? cus its all clamped up and all..maybe the pump got weaker? im not sure..anyone? thanks
dear friend, congratulations for the video and thanks for this! I live in Brazil and here we do not have this product for adaptation. Could you tell me some place where I can buy via the internet and get it in the mail? God Bless America (Brazilian Hugs)
Achieving a higher water quality and during hot periods helps to help a good water quality in your pool. Always keep your pool clean with chlorine and watch your PH value. After signe oxygen supply should help you to use less chemicals in your pool. However, this is not documented.
WTH is the additional white piece that is named air intake that seems to have no purpose? Can I send you a pic because intex doesn't seem to ever answer the phone. 🙄
Good video, but theres no need for you to put that clamp on the outside of the air adapter, its hard plastic is not helping on anything there, other than that, good info.
Mine used to work, and now after taking it out a few times to clean the pump is not giving me bubbles no more..is it some sort of presure? cus its all clamped up and all..maybe the pump got weaker? im not sure..anyone? thanks
Many pumps become weak over time. Clogging of filter and hose .... the possibilities are many. I even use Sand filter as it is the best in my opinion. Paper filter pumps stop quickly and require almost daily cleaning during hot periods when the pool is used a lot.
@@MortenWork thank you for that information! :) Actually I figure it out! If you overfill the pool even just a little bit over "the line", it seems there is too much water pressure for the bubbles to generate.
Just bought the Intex 10 X 30” pool with filter. Filter runs but does not pump into the pool. When running no water in the pump, shut it off and it fills with water and comes out the air valve when opened. Any ideas?
Hello the pump is marked with a plus and a minus! Plus is water into the pump. Minus is water out of the pump. At minus you mount the Intex Air Adapter, so bubbles will come in the water.
Morten Work it worked for about an hour. We shut it off while in the pool then tuned it back on. Pump runs but when you turn air valve no water comes out. Shut the pump off turn the air valve and water is in it. You can see water trying to move to the outlet when it is turned on but nothing happening. We have unhooked all the hoses changed the filter and same thing. Faulty pump?
Thank you for your comment.. Achieving a higher water quality and during hot periods helps to help a good water quality in your pool. Always keep your pool clean with chlorine and watch your PH value. After signe oxygen supply should help you to use less chemicals in your pool. However, this is not documented. But if nothing else, it makes the water very soft and comfortable.
@@MortenWork bubbles don't provide better water quality, water movement does. Flowing or moving or breaking the surface of the water provides more oxygen and removes any carbon dioxide or off gases anything in the water.. Bubbles literally do nothing for water quality.
Achieving a higher water quality and during hot periods helps to help a good water quality in your pool. Always keep your pool clean with chlorine and watch your PH value. After signe oxygen supply should help you to use less chemicals in your pool. However, this is not documented. But if nothing else, it makes the water very soft and comfortable.
Morten Work when I take the black plug off mine the psi rises to the yellow&green line just a tad. What can I do to use my air adapter without raising psi. Or is what I’m seeing normal?
I'm glad I watched this video. I was going to take the hose off and didn't think of just pulling the nozzle off from the inside.
Thank you so much. We were gifted the same pool in like new condition. No instructions so I couldn't figure out what that extra piece was for. Going to add it in the morning and see if the pump works properly.
Why does this make it better? First time pool owner here
Thank you for your comment..
Achieving a higher water quality and during hot periods helps to help a good water quality in your pool. Always keep your pool clean with chlorine and watch your PH value. After signe oxygen supply should help you to use less chemicals in your pool. However, this is not documented. But if nothing else, it makes the water very soft and comfortable.
Sir, the small black plug is not for that return hole. It is to put over the air inlet for stopping aeration when you want it to act as a normal jet. The 2 big plugs you have that come with the pool are the correct ones for return and inlet and they go under that big cap that screws of. Hope this helped somebody just like your video, and sorry for my poor english btw
Thanks for your comment, you write an excellent and understandable English. I was not aware that the plug could also be used to stop air supply. When I received the kit, the plug was in the outlet nozzle. I show this method, rather than using the black plugs that come with the pool. I thought the plugs easily fall out. Thank you for your help and comment.
Thank you, mine was in the nozzle as wel straight out of the box. But i have seen a couple of official intex pictures where it was on the air intake so that is how i know 😁 not an expert but i stumble upon it
ua-cam.com/video/C2j91AcPadE/v-deo.html
So does the little black plug stay on while the pump is running(for the air not to plug the water)
Your silence speaks volumes lol. Very educational video. Straight to the point not like other videos I see people who ramble on about irrelevant crap. Thanks 👍
The black rubber nob needs to be at the top of the air adapter. When you do that you can choose how many air you want to let in. 👍🏻
Me
So that should go on top of that
Do I open the valve like loosen it a little bit when I’m running my sand pump or do I leave it closed idk what the valve is used for lol I’m new to pools
Thank for your 5 min video. I have struggling for the 5 hours on hour to adapt my filter to the pool 😭
Thank you for an very informative video. Short and to the point!
Thank you for your comment.
The black plug goes over the air valve sticking up on the adapter. That's how you "open/close" the airflow.
Yes I know and you can see it in my second video here ua-cam.com/video/C2j91AcPadE/v-deo.html
thanks for the information I am lost in that part of the installation very good video 🙏👍
I want to thank you so much for your advice I was so upset and discouraged when the pump came in the mail and the pice wouldn’t fit in the hole it’s all about money for these companies but you have to be creative and innovative on keep from getting ripped off thank you from New York
Nice video, only the black plug does not go where you put it. It is a cap that covers the aerator to give a solid flow.
ua-cam.com/video/C2j91AcPadE/v-deo.html
Yes you are right
I agree with many of the comments. Vert helpful. Much appreciated.
Thank you for this information I did this before your tutorial and the whole thing come off and drained half my pool while I was out! That clamp is not so clear in the instruction manual 😭😭😭😭
Thank you very helpful saved a world of frustration! I’m subscribing to your channel now
Thank you, you are welcome
Me too lol
lol, I actually jumped a little at 1:50. Nice sound effect. :P
Thank you, my friend!
I´m sorry, what is the function of the adapter? What is it for? I bought a new pump and in the instructions this adapter is like an optional, I don´t now if i should try it or not. Thanks!
You can add more oxygen to your pool with this adapter. On 38 mm intex bats and connection, they are today standard. Gives a more comfortable and soft water jet at your exit to the pool.
I've got exact same pool. I thought the inlet strainer that you pulled out from inside pool is glued or stuck to pool❓I'm concerned it will rip a big hole if I pull it out❓Mine seems to be molded to pool, however I may be wrong.
This is an Intex original part. Nothing is glued. The adapter is held in place with the supplied plastic straps, as shown in the video.
@@MortenWork Ok finally got my pool packed away for winter. I was able to just pull out strainers and replace with new system easily. I did find out that black plug is only used to stop the water flow during assembly. Other then that you don't need it. Thanks for great video
Have you seen my video here? ua-cam.com/video/C2j91AcPadE/v-deo.html
Good job 👏 I love it 👌 thank you for sharing!! I’ll buy one online for my pool!
What is the purpose of this adapter because even without it it works?
You add more oxygen to the water and, according to the manufacturer's instructions, save on chemicals. A bit the same if you use oxygen tabs in your pool.
@@MortenWork I'm using chlorine granules
Mi pregunta es q al principio puse el motor y si jalaba agua y ahora está lento será q ya está sucio el filtro o ahí q comprar un repuesto de filtro
Always make sure and keep the filter clean of dirt. Stopped filter slows down pump speed.
Thank you for a great helpful video
Nice thank you for showing the how to.😎👍
Omg you're video just saved my ars lol VERY frustrated viewer here and YOUR video was the ONLY 1 I effin had to watch!!! of course I didn't watch it 1st which sucks but hey THANK YOU SO MUCH!!!!
Thanks Mr. Saviour!
Do you have any idea if this kit will work on Krystal Clear pump 330 GPH?? i've been looking for this kit on amazon and cant find it. Cheers From a Nicaraguen!!!
Hi and thanks for your question. The set here fits Intex filter pumps with 32 mm hose connection. I have used the set together with a Sandfilter pump with a capacity of 15,000 liters per. hour.
I bought sets here for 300ghp: www.eurotoys.dk/product/Pool_Inlet_Air_Nozzle_Set_For_300Gph_Pum_Intex_Reservedele_12351.asp?site=76&vn=101-012351 og her for 500ghp: www.eurotoys.dk/product/Pool_Inlet_Air_Nozzle_Set_For_500Gph_Pum_Intex_Reservedele_12352.asp?site=76&vn=101-012352
Thank you!! Extremely helpful.
Thank you, you are welcome
Damn that was good! Dude didn’t even have to speak..
If you hear my English language, you will thank me even more ;)
Hi!!! So, I can't get the old adapter off! Plz help. Also, does it matter which hose end goes in where? Thx!
what type tape or rubber did you use on the plastic fitting my hose is to lose without some type of tape or rubber around the fitting
I don't use tape anywhere
So what is the black part that is shown
@@Knights4ever83 I’m in the same boat trying to make this work with a different sort of pool. I think the black part is part of the pool wall itself. Would be helpful to find something to make the pieces fit snugly in the side of a pool not made by intex/without holes pre-made.
What is the black thing around the thing... where did that come from?
Hi watch my second video. It may explain your question. ua-cam.com/video/C2j91AcPadE/v-deo.html
Gracias x como conectarlo lo q no entendí en el funcionamiento de la perilla si va cerrado o abierto cual es la diferencia xq de las 2 formas veo igual el caudal de agua gracias x mostrar saludos desde argentina
la valvula que va hacia arriba (la pieza cilindrica que enrrosco ala pieza grande) es la que provee de aire ala piscina. ahora si te referis al tapon negro, es solo para no regar agua al retirar la manguera y conectar el aereador. Saludos de Nicaragua!!!
@@johannesuriza3020 muchas gracias x el aporte
Tq bro👌👍👍
Should that little black cap go on the little jet thing or no
Hi watch my video on this link which explain the black plug ua-cam.com/video/C2j91AcPadE/v-deo.html
Great video do I put this on the top or lower hole. As another video showed this part at the top? Which is what I have done?
Top hole 👍😉
Great help me and my husband had no idea!
Why did you need a new one? How long before it goes bad?
Ummm the black cap is suppose to go over the air valve.
Yes absolutely just like I show in this video here ua-cam.com/video/C2j91AcPadE/v-deo.html
Is this also for smaller pools like 244x76cm?
Did you use an air compresser for your filter pump? I saw a big tank is it the reason your filter pump is strong?
I use a sand filter pump
Perfect instruction!
Nice vid to start. Question for you or anyone watching this video. Will this work for a 22' x 52" pool with a 75D Game sand filter & pump. The pump is a 3/4 hp.
If they are 32mm and it is an Intex Pool, the set fits as shown. My sand filter pump had a capacity of 10,500 liters per hour.
Tak Morten, was scratching my head about how to fit this, got it fitted now. I don't have all those air bubbles coming out of mine though, do I need to do something else to get those coming through? I just have the jet, no difference than without fitting the air adapter.
duffymoony Try opening the air valve a little bit more to allow more air to come in. The whole concept of the outer peace is so that way that additional top screw which is what gives air
Merciiii !👍👍👍👍👍👍👍👍👍👍
Help...I'm unclear what this adapter does..❓.do I need it❓it came with the new pump...but my pool is smaller...being used more like a hot tub..350gal..thx
Hi. My video here might give you the answer.ua-cam.com/video/C2j91AcPadE/v-deo.html
@@MortenWork just wanted to know if I really needed the adapter...guess not...overkill for a smaller pool or hot tub...thx...that's black cap thingy is cute tho, huh ❓👍
Hello, at this moment in Argentina it is summer and luckily I found your video explaining exactly what I needed, thank you very much.But ......... I have a problem, I have an element of one body, let's say a "mouthpiece" for giving it a name. Obviously it is not of the upper connection that you just showed. Therefore I ask you a favor, if you can show how the parts of the lower connection are mounted, since I have left over this "mouthpiece". Showing how the lower connection elements are connected is sufficient, since this "nozzle" does not fit anywhere.
Thank you.
Note! Intex Air Adopter is only for 32 mm hose connection and hoses.
Hola, si es por cómo van las piezas fijate que podés descargar el manual de usuario. Me regalaron uno de estos pero no sé si servirá para piscina de cemento
Thanks so much
filter is up or down I don't realize can figure out where to mount it is down or up?
Good video thanks love
Do you know if the screens are supposed to suck in the water with pressure, my pump works but both the screens feel like they aren’t sucking any water in??
Sorry, but don't understand your question
if u take out the 'screens' and put ur finger in the whole u will fill it is sucking...if u have a small pool , 8 ft, try just one 'screen' and close the other one. I'm guessing with screen you mean the suction holes? thanks
Muchas Gracias saludos desde Merida Yuc México excelente! 🙏
You're welcome :)
I have the same pool i have all the stuff that you showed on the video but the jet or whatever the name is doesn't go all the way i push hard enough but the part that goes inside the pool is not flush i guess the part that goes inside its too long..
Hello. Is not quite with what you mean. Are no air bubbles coming out?
Where do you get that black plug stopper?
I got water spreading from the holes of the top, what do you think is the cause?
Achieving a higher water quality and during hot periods helps to help a good water quality in your pool. Always keep your pool clean with chlorine and watch your PH value. After signe oxygen supply should help you to use less chemicals in your pool. However, this is not documented.
Does this raise the PH as a side effect?
I'm not getting any bubbles in my water.. the flow is fine, not super strong, but I don't understand why it's not actually aerating the water.
Which pump do you use? It requires a water pressure from the pump for the adapter to work.
@@MortenWork Mine used to work, and now after taking it out a few times to clean the pump is not giving me bubbles no more..is it some sort of pressure that it lost from the rubbers?? cus its all clamped up and all..maybe the pump got weaker? im not sure..anyone? thanks
dear friend, congratulations for the video and thanks for this! I live in Brazil and here we do not have this product for adaptation. Could you tell me some place where I can buy via the internet and get it in the mail? God Bless America (Brazilian Hugs)
Dear Paulo Thank you. You can bye it on ebay here www.ebay.de/itm/283020014120
uau! God Bless you !! thank´s, thank´s and more many thank´s for your !!
Nice❤
Thank you very much!!!!! I needed it!!!
Has it made any kind of difference in water quality or anything?
Achieving a higher water quality and during hot periods helps to help a good water quality in your pool. Always keep your pool clean with chlorine and watch your PH value. After signe oxygen supply should help you to use less chemicals in your pool. However, this is not documented.
Bonjour vous trouver ou se matériels
Merci pour l'info
Hello I would like to buy this equipment can you provide me with a link thank you in advance
And what do the bubbles do exactly?
Second, has anyone found a directional jet cover yet for these pools?
What kind of pump do you have?
Very nice !!
WTH is the additional white piece that is named air intake that seems to have no purpose? Can I send you a pic because intex doesn't seem to ever answer the phone. 🙄
Not sure what you mean. Feel free to send a photo :)
Will this work with a Walmart summer wave pool 14x 36
Hey. I do not know Walmart pool. The adapter fits on Intex 32 mm hose. So unfortunately I can not answer you your question.
Good video, but theres no need for you to put that clamp on the outside of the air adapter, its hard plastic is not helping on anything there, other than that, good info.
Awesome thanks!
Should we use this all the time?
You can do as you please. Watch my second video on how to disconnect the Intex Air Adapter here ua-cam.com/video/C2j91AcPadE/v-deo.html
I have the same adapter but can't get these bubbles :/
Difficult to answer why it doesn't work. The valve may be blocked or your pump is not powerful enough
Thanks 😊👍☺
Vamos fazer o vídeo explicando fica bem melhor de se entende afinal todos não tem o mesmo raciocínio,mas valeu pela dica.
hi want filter do you use
WHAT IS THIS PIECE THAT GOES UP?
Genial...gracias !!!!!!
Mine used to work, and now after taking it out a few times to clean the pump is not giving me bubbles no more..is it some sort of presure? cus its all clamped up and all..maybe the pump got weaker? im not sure..anyone? thanks
Many pumps become weak over time. Clogging of filter and hose .... the possibilities are many. I even use Sand filter as it is the best in my opinion. Paper filter pumps stop quickly and require almost daily cleaning during hot periods when the pool is used a lot.
@@MortenWork thank you for that information! :) Actually I figure it out! If you overfill the pool even just a little bit over "the line", it seems there is too much water pressure for the bubbles to generate.
Just bought the Intex 10 X 30” pool with filter. Filter runs but does not pump into the pool. When running no water in the pump, shut it off and it fills with water and comes out the air valve when opened. Any ideas?
Hello the pump is marked with a plus and a minus! Plus is water into the pump. Minus is water out of the pump. At minus you mount the Intex Air Adapter, so bubbles will come in the water.
Morten Work it worked for about an hour. We shut it off while in the pool then tuned it back on. Pump runs but when you turn air valve no water comes out. Shut the pump off turn the air valve and water is in it. You can see water trying to move to the outlet when it is turned on but nothing happening. We have unhooked all the hoses changed the filter and same thing. Faulty pump?
What is the part # for this? I can't find it anywhere. Thanks
See the description
Merci !!!!
Спасибо-thanks
C'est le système que j'ai sur ma piscine mais je ne trouve nulle part expliqué en français à quoi ça sert d'oxygéner son eau ... ?
🤨
Hej Morten det er naboen
Hej Samuel tak fordi du besøger min kanal. Jeg kigger lige forbi din :)
А где взять пятый хомут?
On eBay😊
1:51 🔥😆😆😆
Where do you buy the kit?
eBay :)
where can I buy the kit from uk please
Unfortunately, I don't know where to buy it in the UK. I bought mine on eBay.
Desculpe amigo qual é mesmo função desse adaptador?
Adicione mais oxigênio à água da piscina para reduzir o consumo de cloro
@@MortenWork onde eu compro?.
@S. A. Yes almost
Sim quase
Si casi :-)
A minha piscina já vem com esse adaptador.comprei ela faz um mês.
I couldn’t use mine it leaked bad
What is the pool pump
A sandfilter pump 😀
Chido
Ten kiu
Wo kann man den kaufen?
www.eurotoys.dk/product/Hydro_Strainer_Aeration_Upgrade_Kit_Intex_Reservedele_25023.asp?site=76&vn=101-025023
The air adapter leaks
It wears out over time, but you buy a new one. It is the rubber inside the valve as well as the o ring
So you get bubbles in the water? Why what purpose would this provide.. Scratches head... None
Thank you for your comment..
Achieving a higher water quality and during hot periods helps to help a good water quality in your pool. Always keep your pool clean with chlorine and watch your PH value. After signe oxygen supply should help you to use less chemicals in your pool. However, this is not documented. But if nothing else, it makes the water very soft and comfortable.
@@MortenWork bubbles don't provide better water quality, water movement does. Flowing or moving or breaking the surface of the water provides more oxygen and removes any carbon dioxide or off gases anything in the water.. Bubbles literally do nothing for water quality.
What is the point of the air adapter?
Achieving a higher water quality and during hot periods helps to help a good water quality in your pool. Always keep your pool clean with chlorine and watch your PH value. After signe oxygen supply should help you to use less chemicals in your pool. However, this is not documented.
But if nothing else, it makes the water very soft and comfortable.
For people without gills must be a gag, if it was for fish it would oxygenate the water for better fish breathing.
Morten Work when I take the black plug off mine the psi rises to the yellow&green line just a tad. What can I do to use my air adapter without raising psi. Or is what I’m seeing normal?
Montando a minha agora
Tried it, when I tugged it out a bit water spilled everywhere
Qual site compro um desse
Ebay :)
part number?