Onefinity CNC J Tech Laser - Canvas Burn
Вставка
- Опубліковано 27 сер 2024
- In this video, I try a laser burn on a canvas. I did two even coats of spray paint on the canvas, and after it was fully dry - I did a burn on it.
It turned out great - the laser burned away most of the blue, exposing the white canvas underneath. This gives it a perfect patent poster or blue print look.
If you would like something custom made for you or want to support me and what I do, please visit my Etsy shop
etsy.me/3DRVM5C
Affiliate Links
If you are looking to use some very good CA glue or some accelerator - please use this link . You will get a discount and I will get a small percentage. It's a win win. Just use code SJS10 at checkout!
www.starbond.co...
Acrylic Paint amzn.to/3Bc5Y8d
Bottle Cap Magnets amzn.to/3LmnBXo
Bottle Opener amzn.to/3JkrLgG
Box Hinge 105 Degree Stay Open amzn.to/3h2k5nv
Canvas amzn.to/3oEMkwK
Circle Center Finder amzn.to/3LmZTdV
Clock Hardware Kit amzn.to/33bvj5w
Keyhole Bit amzn.to/3uHpojV
Masking Tape amzn.to/3GJ8Ydc
Nylon Bolts amzn.to/3JtmIKW
Nylon Washers amzn.to/3gOv2c5
Nylon Wing Nuts amzn.to/3Lz31mY
Slate Coasters amzn.to/3LiZglo
V Bit amzn.to/3HH2ygb
Thanks for watching, please subscribe!
#onefinity #laser #lego
Just starting my Onefinity journey and hadn't really considered the laser much to this point. You have given me an entirely new appreciation for laser projects. I see a laser in my future. Thank you for your contribution to the community.
Awesome - you should definitely do it. There are so many things you can do with it. Stay tuned. Lol
Then you will take a $3000 cnc and make it useless while you use a $750 Laser that doesn't perform as well as a dedicated $500 laser. Check out the Atomstack X7.
@@ClintonCaraway-CNC Yes - If you’re going to do some serious laser work - and start a production line - you’ll need to upgrade. You’ll need a separate machine in order to run both. I have the non-pro j tech laser and it works just fine. If I decide to get more into laser work, I will upgrade. I would love a rotary stand to do drinking glass and water bottle etching. With a stronger laser, you can increase the speed because of the increase in power - cutting down your project time- which is nice as well.
@@ClintonCaraway-CNC For a small shop, piggybacking off a super solid cnc setup sounds great... You're practically doubling it's use, doing two things in half the square footage ... with one obvious setback, only being able to run one at a time.
Great job! My two (three) favourite hobbies; Lego and CNC (Laser)
Thanks! Mine too.
I've watched a couple of your videos and have enjoyed them. I'll look forward to what you do next. I have one suggestion for you... please give detailed information on the items you use in your videos and more details on how you did things. I find myself having to go back and pause the video to try to catch something. In this case, it was the blue paint you used. Thanks for listening. Keep up the good work.
Thanks for the input. I will definitely be more thorough from now on. I was afraid the video would be too long and lose some people. Thanks for watching!
@@SJSSawdust Looking forward to new videos from you
Nice video! Do you still use the laser attachment for your onefinity or has it been replaced by your C02 or other diode laser?
Thanks! I do not still use this laser, although I’ve been too lazy to disconnect it.
Haha nice, what was the reason for not using it anymore?
@@CleanEdgeProductions well, to be honest- I have a problem with over-thinking things and I didn’t want to add any extra wear and tear on the machine. With it being 7w - I would have to do a LOT of passes to cut though material. Now, I am sure this machine can handle the workload, but….. I have a problem. lol
which of the lasers is that?
That is the 7 watt J Tech
I am new to laser. I have the same set up you have. I can not get laser to work using easel. Any ideas how to fix problem?
Try watching my other video about the setup process
ua-cam.com/video/z2OQe8l3tVg/v-deo.html
Let me know if that helps
Yes sir. I watched video b4 did all that. Turn file on moves very little, but laser never turns on when running file.
@@garygriffith4866 silly question but did you turn the toggle switch on, on the laser control box , turn the key and then hit that red reset button?
Yes sir. The laser comes on, but wont work with easel file.
May I ask if you might share the file to test the speeds and feeds of the laser, please? I think that's super helpful and would save a ton of time and mistakes. 🥰
All you have to do is search for Lightburn Speed and Power test, there are SO many that you can download!
@@SJSSawdust thank you very much, I was unaware of this. I have one of the original seven watt lasers and I never actually got around to using it. I fell off a ladder at work and shattered my heel just after I got my machine. So I just actually returned the laser to Onefinity and they gave me a credit and I'll be getting the 14 watt pro that was just released. Thank you for your reply I really appreciate the information.
@@misury Well that sucks about your heel! But as far as the laser goes, I’m jealous! I want to upgrade to the 14w.
@@SJSSawdust it was a long, sucky recovery lol. Stuck in bed for 9 months sounds way more fun and relaxing than it actually is! 🤣😂
Nice! Did you make the wooden lego man?
Yes I did. That was quite a project. Lol