Very interesting. When I changed to fins with less rake I immediately noticed that the board seemed to ride flatter. I have not seen anyone else mention this. Subscribed!
Nice Videos! One tipp though: I apply th powdery stuff first and then drip the Superglue on it. That way I can dose the structural stuff better and make sure it is properly soaked. Hardens in seconds.
I just picked up a Zulu Iklwa Evo 2 today! Excited to finally replace the stock fin. Took a lot of sanding to make it fit my JP Super Sport but it’s now nice and snug. Sits a bit deep but I’ll do the superglue and charcoal dust. Nice trick! How do you guys like the Iklwa? Impressions?
Very interesting. When I changed to fins with less rake I immediately noticed that the board seemed to ride flatter. I have not seen anyone else mention this. Subscribed!
I learned some nice new tips. Thanks!
Nice!
I also use King fins together with the AV!
Great tips!!
Hello SurfKasper. Would you mind doing a video on the differences of your fins. Or your experiences with different fin brands. Like pros and cons!
Nice video!
Nice Videos! One tipp though: I apply th powdery stuff first and then drip the Superglue on it. That way I can dose the structural stuff better and make sure it is properly soaked. Hardens in seconds.
Thanks I will try that next time
Nice Video! What will you do with the broken fin now?
It is delaminated in the head, so it will just be used for experiments
Great vídeo!! Awesome!! Thanks!! Just one question: what is the powder you put on top of the glue?
Glas dust/pearls. You can find in RC shops on eBay.
@@surferkaspert4679 Thanks!!
@Jared Ogilvie www.ebay.de/itm/Fuller-Granulat-fur-Sekundenkleber-Cyanacrylat-Kleber-Filler-Fullstoff-20g/292931975615?_trkparms=ispr%3D1&hash=item44341b39bf:g:CeAAAOSwIztci1TP&amdata=enc%3AAQAFAAACcBaobrjLl8XobRIiIML1V4Imu%252Fn%252BzU5L90Z278x5ickkvjzWOStkxwnlDuxSI1PVVpzi93QxT6b3jnxW5NJcwgJWJ0M1EgAwI2W6is73ycWV4DJsjgfc36JcyXF0R4KNOPy7Bfd%252FoTFaJQYr88BesXZJ23VkVrY9WphiQhL%252BIBjOBYomUv0OYIIddGkjWo46gqLGiIX%252BNdQ%252Fdpjh4uJs8gKj3yUR0CdxHOE8WAmbU2bf8%252B2gUMA3IrzD4KRGuL4D0alLGEULCN1rBo8D%252FFnLGUIJp0gu4V4T7xWaurrlgiYxcp3AnOeZEsW6h7vjoCYZZfY7wlz7ORAfYWqOxYthxplZgsWYk4K5WZgxnnlt5It8sZK3Ww%252Fo5%252Fg%252BplF%252BNiPtgFw8w47GZXDdHawbisz9Em6per1gTtjYcQyqJR1Zi655tFKxgJmRu%252BuxkGAACiKZC4fm9vcYKrcFNp53D1mLJop2knMiXMbWJ6DAVYXugwN1Oiy%252BUHy0fP%252F1kBbRhUMQyFtcjlKWEcTPKij%252FtkK8cogwD9QM55caRJ3z%252BeYmLtvES2UOrxOsES020E3kUDsrUXO2CNOmoTHxFPumnAmE5pXbnG%252BAioVVIARBtIoIMHbXgOo8yeu%252B%252FknW37v2OUsFqk4y%252BPW4OcLLVjchB2MDtYx7wCVF0LEQU2QMoL7MRNzmuHNKQqNHFFG9VVUkVm1KRNJfOec8TzUgGI9XTx3nydbCRpCkw%252FyGDb3GX%252F0aK%252BhM0AUyIahHs4RzN7Knj837jpu8lTic6HYNAckqtT%252BGBTuEvvnwru4Y2PFNxUwrr5YuH8G21mXOufHvT7khuM0gzA%253D%253D%7Ccksum%3A29293197561532893e126dd44b3ca3380c2f9ddfcbcf%7Campid%3APL_CLK%7Cclp%3A2334524
@Jared Ogilvie yes normal superglue
Very nice keep it up
what size you would have put for max speed on a freerace 122l 72width and 7.8 slalom sail?
Depends a little on the fin. But I have always used 37 cm
@@surferkaspert4679 thanks ..i use 42cm and i cant go faster than 50km ill try smaller
Nice video! I'll try superglue. One thing: I'd at least wear an N100 mask when sanding carbon. Carbon is nasty on the lungs.
I just bought 2 new Zulu Ikwla fins and I the trailing edge is not that sharp. I noticed you have one as wel. Do you recommend sanding it?
Yes I sand most of my trailing edges. The Zulu ones needs sanding. 400 wet
@@surferkaspert4679 Thanks! The video is very helpfull👍🏼
I just picked up a Zulu Iklwa Evo 2 today! Excited to finally replace the stock fin. Took a lot of sanding to make it fit my JP Super Sport but it’s now nice and snug. Sits a bit deep but I’ll do the superglue and charcoal dust. Nice trick!
How do you guys like the Iklwa? Impressions?
Wait a minute...did You scratch a carbon fin just to show how to repair It????🤪