when you replaced the cam roller for the pump, did you turn the crankshaft before pump installation? or just oil the roller, and slowly put the pump on?
What was the vehicle doing or why did you change the fuel pump? What code were you getting ? I'm getting PO191, replaced the fuel rail pressure sensor but didn't fix the problem. It's stalling at every traffic light. Saw a video with the same code and someone installed the high pressure fuel pump and that fixed their vehicle. Thoughts?. I am not a mechanic, so any help is appreciated.
I have the same problem with my 2013 reduced power and stabilize track light comes on...That sucka will go to California but soon as I stop at a red light reduced power pops on then stabilize track light comes on
It took you maybe 1hr with one hand ? It would take me a 1 week to change that , lol tanks much for the video
Good job
when you replaced the cam roller for the pump, did you turn the crankshaft before pump installation? or just oil the roller, and slowly put the pump on?
Oiled the roller and slowly put the pump on🤣
How long did this take you to change?
@@Sean26385 after doing 4 or 5 about 30-45 minutes. My first time I’d say a hour and a half
What was the vehicle doing or why did you change the fuel pump? What code were you getting ? I'm getting PO191, replaced the fuel rail pressure sensor but didn't fix the problem. It's stalling at every traffic light. Saw a video with the same code and someone installed the high pressure fuel pump and that fixed their vehicle. Thoughts?. I am not a mechanic, so any help is appreciated.
@@blackdiamonddetailingso you really don’t have to turn the camshaft?
My follower wont come out, how do you suggest i go about getting that thing out?
A magnet
@blackdiamonddetailing I mean like expanded against the walls stuck
@ does it have a hole on the end? It may be able to be pulled out or spun and loose if not it may have to be taken down further
@blackdiamonddetailing It has 2 holes, 1 at the top and one at the bottom and I tried needle nose pliers, no luck
@ valve cover may need to come off so it can be messed with on the other side
What code was it getting if u don’t mind?
There could be 3/4 different codes. P0191 p228d a couple others, as well as other symptoms
What is the symptoms for replacement
Ecm light on, on and off reduced engine power, running after shut off many others lol
I have the same problem with my 2013 reduced power and stabilize track light comes on...That sucka will go to California but soon as I stop at a red light reduced power pops on then stabilize track light comes on
@@BroMag135change the solenoids on top of the engine
It's OK to speak. Video's are more informative if the host includes commentary.
This video is about operations. If you need a concept, look for another one.
You need him to come change it for you as well?
Horrific engine. Pure garbage. GM should be ashamed of themselves.
im more ashamed of myself for buying that POS equinox
GM's motto hasnt changed in decades and wont until shut down by the american people.
PARTS NUMBERS PLEASE
For the hp fuel pump?
@@blackdiamonddetailing YES ALL NEW PARTS YOU PUT ON IN THAT VIDEO. THINKING ABOUT CHANGING MINE AS WELL
@@chrisssmith3206 pretty sure the pump # is CHM10008 from autozone but the fuel line I have no idea its dealer only unless you reuse the old line
@@blackdiamonddetailing THANKS FOR THAT INFO, I REALLY NEEDED IT .
What camshaft flower did you use intake or something else
I hate 2.4’s lol