I HAD TO RE-UPLOAD THE VIDEO! THERE WAS 4 MINUTES MISSING IN THE END! DAMN PREMIERE PRO! FOR THE BMPCC4K STUFF: 6:36 TEST FOOTAGE: 8:59 CONCLUSIONS: 10:08 SEE YOU AT IBC 2019 in Amsterdam in 2 days. I will be the one of the Moza Masters at the seminars teaching some things… =)
Hi, I placed an order on it but now I'm not sure anymore about the payload. I don't understant how it is not possible to put other lenses than the smaller ones as the BMPCC4k is 722g and the total payload is announced at 3.2kg. I want to buy the a7III which is 650g but I want to put heavier lens on it. Will it be possible with the A7III?
Hey..as you can see from the review and 10 things that i made before i am using the 16-35mm F4 with 2 follow focus attached and all the cables so no problems. And the 24-105 F4 will also work.
Thanks for the review! The packability (11:53) portion of the video is exactly what I was looking for. Trying figure out a good pack to get and I need to accomodate the Aircross 2. Thorough review!
Hi Mauro, first of all thank's for this great and complete video ! But i have a question, why all the footage you show here is only with the A7III ? Were you able to achieve similar great result with the BMPCC 4K and the Aircross 2 ? Any footage that i can see ? Thank you !
This is my new favorite camera gear channel. All your videos are inspiring, helpful, and easy to understand. I have a question I hope Mauro or other professionals here can answer. I will be using the simple but still wonderful old original Blackmagic Pocket Cinema Camera (not the 4K, 6K, or 6K Pro), and that camera can not connect to devices that controls the camera. Can I still mount my BMPCC Original on the Moza Aircross 2 and use it? I will mount my iPhone, CineEye Air, and Tilta Nucleus Nano follow focus on the camera, so that I can use one phone on the camera as camera monitor and an assistantuse his phone to do wireless follow focus. I hope my explanation is clear. So will my setup work with Moza Aircross 2?
That should work just fine. I have an OG BMPCC myself, and I also use the Aircross 2. In fact, since the OG is so light, I was able to balance a Sigma 18-35mm with no issues on it (granted, the OG is in a half-cage, so that helps). It might also be possible to remotely start/stop recording via the gimbal as well, since the OG has a LANC input. However, I haven't attempted that yet.
@@kentjensen4504 you're welcome. Also, as a quick update; I got my hands on an iFocus M (the follow focus for the Aircross 2). If you're using a Sigma 18-35mm lens, good luck getting it balanced. Maybe with a counterweight attached to the roll arm. Otherwise, a smaller lens is going to be necessary for it to balance.
Loved the review, Mauro. And I love the enthusiasm you have for gear! Quick question, for a Sony A7 series camera (a7sii to be exact), with a Tamron 28-75 would you go with Moza Air 2 or the Moza Aircross 2? I love the phone tracking feature on the Aircross 2 but would have better peace of mind having the payload of the Air 2. What fo you think?
Check on the latest firmware Air 2 might also have phone tracking feature on the latest upgrades , the mimic gesture is for sure available . There's a Korean video explain about it
@@dalm4822 It depends on what you want, because with the recent update both gimbals almost have the same features. If you want the axis locks, small form factor, and portrait mode, go for the Aircross 2. If you want the higher payload capacity, go for the Air 2. In my case, the Air 2 is still sufficient for my needs specially with the latest update. Also, I prefer the battery system in the Air 2, because you can replace it with better 18650s, higher capacity 18650s, to increase its battery life along with the spark supply system, and it is cheaper than buying proprietary batteries.
Where you able to control the BMPCC4K with the Aircross 2? Did you had the M3C-CP camera control cable? Because without this cable you can't control the BMPCC4K or the Fujifilm X-T3 cameras
@@MAUROSFILMS I just returned it. To buy the cable, will cost me extra £40 or Dollars. I don't understand why they didn't include it in the first place.
@@MAUROSFILMS Thanks for your reply. Haven't actually bought it yet. I saw a very recent review by Brandon Li where he talks micro jitters with every step he walks. So was just wondering about your experience.
@@MAUROSFILMS I'm also nikon D5300 user and planning for buying aircross 2 but how can I will able to control my focus as nikon this series is very bad in focusing
Hi Mauro, I’ve received the gimbal and I have some issues but maybe that’s me. The gimbal don’t like it when I put my phone on my sony nex7. The body start to shake and make a high pitch noise. I’m well under the max payload. Do you know what to do? Do I need conterweights? Also is there a way to keep the ifocus motor to not skip sometimes when focusing?
What is the use case for Mimic Control? From the video reviews I have watched so far, it seems that within the app, that you cannot see what you are framing through the phone's display. Therefore, how do you know what you are framing? I assume it must be that the camera and Air Cross 2 are on a tripod, and you are holding the phone in your hand(s), and standing behind the camera to frame the action by watching the screen of the camera or attached monitor? Is this correct? Seems like a killer feature would be to have the camera video mirrored to the Moza app during Mimic Control.
Hi, Mauro! I'm new to your channel and already became a fan! Thank you for your the excellent work! I've decided to order my Moza after watching your review. My question is: Can you power the Bmpcc4k from the gimbal? If so, which cable would it use? Cheers from Japan!
Thanks for the follow. There should be the Can bus cable: I think this one: www.amazon.com/Tilta-Power-BlackMagic-Pocket-Camera/dp/B07T5C3B3P/ref=mp_s_a_1_3?keywords=dc+power+cable+blackmagic&qid=1570087972&s=gateway&sr=8-3
Great video, Mauro! I've just ordered this gimbal from Amazon...I should receive it tomorrow. I am watching a lot of video reviews about it saying everything and the opposite of everything....so I really hope it will work fine with both my Canon 90D and my M50 to be able to upgrade the level of my youtube videos and other paid works....however, your video helped me a lot to get enough strength and press the "buy button" on Amazon. Thank you!
Any chance you're doing a comparison to the Ronin SC? I have the SC but really like the idea of more options for mounting longer lenses. Have been hearing that the AirCross 2 has jittery footage. Have you tried the new firmware? Thanks for the great content!!
Mauro, with the Weebill I can move the camera to any position with my hand and it stops/stays at that spot. Can you do the same with the Aircross 2 and/or Ronin SC? Thank you!
Mauro - Thanks for the video! In your opinion, will this gimbal balance and function well in upright and underslung modes with an A7 + 24-105 Sony lens?
Hi I'm familiar with the zhiyun weebill lab because a friend has it, and I have used it a lot and I am fascinated with his work, but I would also like to try the aircross 2 wench; especially for its vertical recording function Do you think it's a good choice?
Thank you for the review Mauro. While the BMPCC 4K and a Sigma 18-35mm probably will not work very well, I have found that it is possible to balance an original BMPCC (HD) and Sigma 18-35mm (camera is in a half-cage).
Thanks for the re-upload. I guess my answer was there in the last few min of video. Hopefully the setup of a73 with Sony 16-35 would be perfect for this.
hey, great video also if I buy the Moza Air Cross 2 but my camera isnt listed in the compatibility list will I still be able to use it (my camera is the Canon EOS 200D/SL2
bye weebill..., btw thanks for the comprehensive review mate !, Indonesia is also waiting this stuff to be officially sale, but just wondering how good it is compared to the ronin sc, cause for my pov, small and compact gimbal needs at least a stabilizer in lens or in body to produce sweet smooth footage and no more post work for the footage, ronin sc or aircross 2? 😅
Do you see any problems with the footage? many are reporting jittery footage, battery problems (motors dont work well under 25% battery) and cheap build quality???
funny how at 10:05 he says he was making the weird jitters and the gimbal was not causing this. i dotn trust this reviewer, his first impression video was ALSO uploaded on the Gudsen youtube channel. so... there is some heavy bias gonig on somewhere.
thx! Can u make some shoots with bmpcc4k + manual lens? You shot with Sony, but there are lenses with stabilization. And it will not be a completely honest test. :))
@@MAUROSFILMS I see. The review was great! Do you think it handled the a7iii + 16-35 f4 well? And would it be possible to use a7iii + 24-105 f4 without any jitters?
@@MAUROSFILMS iam really stuck i dont know hat i need to buy the weebill s or the moza aircross 2 but i like the hand of the moza more , have you updated your moza ? did they fix it ? pleeease answer me
3 months ago Sold my weebill , such a waste of money , very weak . Now when I want to buy moza air 2 , comes the aircross 2 , but after look this review I think I'll go buy the workhorse moza air 2
@@MAUROSFILMS let me get this straight , so for the motor power quality for the lightweight gimbals are RONIN SC >> AIRCROSS2 >> WEBILLLAB is this correct ?
I'm quite depressed, since I got my Moza AirCross 2, I have my BlackMagic Pocket Cinema 4K and I still cannot use it as I want. For example, I cannot put on ANY way the Focus motor to be fixed with original parts from Moza. Mauro! You, here, in this video, DOESN'T talk about Mounting at all. Kinda frustrating, since the title says, mounting options. I will be much more happy to have the details of mounting. I personally kinda HATE that only one screw holding the whole camera on the plate. And you NEITHER used original parts to fix the Follow Focus Motor. You obliviously using an AndyCine Vlogger to mount it and I have no idea, what else, since there is a plate on the Vlogger. I found other UA-cam channel, there been fixed with the Rig, the BMPCC4K. I cannot fix with the Rig neither, after I cannot balance, the plate getting too short. And each time take off the whole Rig and mount it back, when needed is MORE than a pain. An useful video about this in the real life will be very appropriated! I have Tilta cage and I have an SmallRig cage for my Atomos Shinobi and I doesn't have really idea, which parts I looking for to get my setup full. I don't know this parts name, what is compatible with what. Such a tiring progress to get trough. And I got no idea, who I can ask for assistance. I'm even living in Germany as Hungarian, means, I have to look the parts in German or try to type in English - in many cases, for example, on amazon.de, there is find with English words too. But my point that in the description as in the video, you neither mention anything about the AndyCine Vlogger or anything else, you was using to get this work!
So, just like everyone else, this guy stuck a cable in the battery with ZERO EXPLANATION ON WHICH CABLE AND WHERE THE CABLE GOT POWER TO GO INTO THE BATTERY! HOW DO YOU CHARGE THE BATTERY?
Amazing review. Great feature rich gimbal I’m just not stoked on the wobbly footage I’ve seen in multiple reviews on this gimbal. I know these things can be rectified in post but I’ve literally never seen that wobble on a Crane 2 which my buddy uses with a 1dx ii. Really want the most stable gimbal for my buck it’s a shame both features and stability can’t often be found in one package.
Hi I wanted to ask you I have the blackmagic 6k mounted on a Slider and I would like to make an approach movement to an object How can I use an automatic follow Focus to keep the object in focus? CIAO Paolo from Italy
I HAD TO RE-UPLOAD THE VIDEO! THERE WAS 4 MINUTES MISSING IN THE END! DAMN PREMIERE PRO!
FOR THE BMPCC4K STUFF: 6:36
TEST FOOTAGE: 8:59
CONCLUSIONS: 10:08
SEE YOU AT IBC 2019 in Amsterdam in 2 days. I will be the one of the Moza Masters at the seminars teaching some things… =)
hi air cross 2 vs ronon sc vs webill lab, which one you will recommend( Sony a7iii)
How can you not sub to this channel? His energy sells the whole thing! You could review wet toast and I’d tune in!!!
Thanks a lot for the support!
I agree. Mauro is cool.
Where can I get this FollowFocus mount at 11:02? Is this only available for the BlackMagic Cameras?
This is actually the extension rod from the Moza Air 2 package with a Vlogger Hot shoe mount
@@MAUROSFILMS Thanks! But how did you mount the Tube for the iFocus? COuld you add a Link wher to buy this...?
That's my problem too! He doesn't provide the hints AT ALL. But write in the titel, mounting options. That's very disappointing, really.
It is work good for xt3 and lens without OIS?
Thank you for the review!
Please make a comparison video between Moza Aircross 2 vs DJI Ronin SC vs Zhiyun Weebill Lab.
It would be great.
Watching you video makes me happy!!!! Thank you, Mauro!!!
Glad o hear that
Footage looks smooth. Perfect setup for medium size kit
Exactly😀
I love your enthusiasm, Mauro !
Thanks
Awesome review! What camera bag did you use?
THANK YOU! For saving me the headache of realizing this wouldn't support my caged bmpcc4k before I made the mistake and bought it ❤ hope all is well.
Hi, I placed an order on it but now I'm not sure anymore about the payload. I don't understant how it is not possible to put other lenses than the smaller ones as the BMPCC4k is 722g and the total payload is announced at 3.2kg. I want to buy the a7III which is 650g but I want to put heavier lens on it. Will it be possible with the A7III?
It's all about the weird size of the Blackmagic. You will be really fine with the Sony A7 iii and GM lenses
MAURO'S FILMS cool! Thanks Mauro 🙏 Great work on your videos man.
@MAURO'S FILMS Do you think it handled the a7iii + 16-35 f4 well? And would it be possible to use a7iii + 24-105 f4 without any jitters?
Hey..as you can see from the review and 10 things that i made before i am using the 16-35mm F4 with 2 follow focus attached and all the cables so no problems. And the 24-105 F4 will also work.
@@MAUROSFILMS thanks Mauro!
Can I use small rig cage on my Blackmagic 4K or do I have to remove it?
Better to remove it.
Thanks for the review! The packability (11:53) portion of the video is exactly what I was looking for. Trying figure out a good pack to get and I need to accomodate the Aircross 2. Thorough review!
So this gimbal jitters during filming?
Hi Mauro, first of all thank's for this great and complete video ! But i have a question, why all the footage you show here is only with the A7III ? Were you able to achieve similar great result with the BMPCC 4K and the Aircross 2 ? Any footage that i can see ? Thank you !
This is my new favorite camera gear channel. All your videos are inspiring, helpful, and easy to understand. I have a question I hope Mauro or other professionals here can answer. I will be using the simple but still wonderful old original Blackmagic Pocket Cinema Camera (not the 4K, 6K, or 6K Pro), and that camera can not connect to devices that controls the camera. Can I still mount my BMPCC Original on the Moza Aircross 2 and use it? I will mount my iPhone, CineEye Air, and Tilta Nucleus Nano follow focus on the camera, so that I can use one phone on the camera as camera monitor and an assistantuse his phone to do wireless follow focus. I hope my explanation is clear. So will my setup work with Moza Aircross 2?
That should work just fine. I have an OG BMPCC myself, and I also use the Aircross 2. In fact, since the OG is so light, I was able to balance a Sigma 18-35mm with no issues on it (granted, the OG is in a half-cage, so that helps). It might also be possible to remotely start/stop recording via the gimbal as well, since the OG has a LANC input. However, I haven't attempted that yet.
@@charlesoxley7242 Fantastic. Very kind of you to respond.
@@kentjensen4504 you're welcome. Also, as a quick update; I got my hands on an iFocus M (the follow focus for the Aircross 2). If you're using a Sigma 18-35mm lens, good luck getting it balanced. Maybe with a counterweight attached to the roll arm. Otherwise, a smaller lens is going to be necessary for it to balance.
Is there any way to attach a field monitor to this ?
Of course: The back side of the gimbal accepts 1/4 and 3/8 screw mounting
I do like your videos Buddy.
Thanks
Thnx for the review. Is it possible to place the tiltmotor on the other side?
Mauro...you always get the latest Moza first. Can you tell me if the Aircross 2 is bigger or smaller than the Moza Air 1?
I had not the chance to use the Moza Air 1 but the Aricross 2 could be actually at the same footprint..maybe a little smaller
What gimbal is the guy in the video using for the bmpcc 4k and the tilta cage?
using the Moza Air 2
Hey! So aircross 2 can hold bmpcc 6k without the need of counterweight
Hi Mauro. Thanks for the video.
You are using a vert thin HDMI cable.
Which one is that?
Just a thin cable from Amazon
@@MAUROSFILMSThansk for the fast answer. Optical Fiber?
Loved the review, Mauro. And I love the enthusiasm you have for gear! Quick question, for a Sony A7 series camera (a7sii to be exact), with a Tamron 28-75 would you go with Moza Air 2 or the Moza Aircross 2? I love the phone tracking feature on the Aircross 2 but would have better peace of mind having the payload of the Air 2. What fo you think?
Check on the latest firmware Air 2 might also have phone tracking feature on the latest upgrades , the mimic gesture is for sure available . There's a Korean video explain about it
Diego is right. Check this video out and turn the English captions on. ua-cam.com/video/yCaLDj1KWFs/v-deo.html
@@diegodimas you are a life saver Diego! Thank you so much. Un abrazo!
@@carlojc ill check it out. Thanks! I trust this means you suggest I go for the Moza Air 2?
@@dalm4822 It depends on what you want, because with the recent update both gimbals almost have the same features. If you want the axis locks, small form factor, and portrait mode, go for the Aircross 2. If you want the higher payload capacity, go for the Air 2. In my case, the Air 2 is still sufficient for my needs specially with the latest update. Also, I prefer the battery system in the Air 2, because you can replace it with better 18650s, higher capacity 18650s, to increase its battery life along with the spark supply system, and it is cheaper than buying proprietary batteries.
Hello, I don't understand what the point to set L-Bracket on right side ? Battery's trap is blocked no ?
Is it strong enough to balance a Sony A7R III + 16-35mm with a Battery Grip ???
Without the battery grip it's working perfectly... I don't have a battery grip to test it out..
MAURO'S FILMS thanks I’ll have to give it a try but I think it’s probably better without a battery grip. Thanks again!
Where you able to control the BMPCC4K with the Aircross 2? Did you had the M3C-CP camera control cable? Because without this cable you can't control the BMPCC4K or the Fujifilm X-T3 cameras
I wasn't controlling it with the cable. I know that you need that cable. I don't use it.
@@MAUROSFILMS I just returned it. To buy the cable, will cost me extra £40 or Dollars.
I don't understand why they didn't include it in the first place.
@@wgraoui I know..it should be included.
@@MAUROSFILMS I went now for the Feiyutech SCORP. It has a couple of extra features which I like
@@wgraoui Great
Do you get micro jitters without body and lens stabilization?
Did you update it to the latest software?
@@MAUROSFILMS Thanks for your reply. Haven't actually bought it yet. I saw a very recent review by Brandon Li where he talks micro jitters with every step he walks. So was just wondering about your experience.
@@thomasshingo I didn't encouter the problem after the update. There was some jitters on the first firmware.
@@MAUROSFILMS I see. Thanks!
Awesome review Mauro! Always top notch brother!
Thanks a lot
Hei Mauro! I have Nikond5200,what is the perfect gimbal for me? Air2 or Aircross2?
Yes.. the Nikon will work great with the Moza Aircross 2
Thank u so much!
@@MAUROSFILMS I'm also nikon D5300 user and planning for buying aircross 2 but how can I will able to control my focus as nikon this series is very bad in focusing
Hi Mauro, I’ve received the gimbal and I have some issues but maybe that’s me. The gimbal don’t like it when I put my phone on my sony nex7. The body start to shake and make a high pitch noise. I’m well under the max payload. Do you know what to do? Do I need conterweights? Also is there a way to keep the ifocus motor to not skip sometimes when focusing?
What is the use case for Mimic Control? From the video reviews I have watched so far, it seems that within the app, that you cannot see what you are framing through the phone's display. Therefore, how do you know what you are framing? I assume it must be that the camera and Air Cross 2 are on a tripod, and you are holding the phone in your hand(s), and standing behind the camera to frame the action by watching the screen of the camera or attached monitor? Is this correct? Seems like a killer feature would be to have the camera video mirrored to the Moza app during Mimic Control.
Hi, Mauro! I'm new to your channel and already became a fan! Thank you for your the excellent work!
I've decided to order my Moza after watching your review.
My question is: Can you power the Bmpcc4k from the gimbal? If so, which cable would it use?
Cheers from Japan!
Thanks for the follow. There should be the Can bus cable: I think this one: www.amazon.com/Tilta-Power-BlackMagic-Pocket-Camera/dp/B07T5C3B3P/ref=mp_s_a_1_3?keywords=dc+power+cable+blackmagic&qid=1570087972&s=gateway&sr=8-3
Great video, Mauro! I've just ordered this gimbal from Amazon...I should receive it tomorrow. I am watching a lot of video reviews about it saying everything and the opposite of everything....so I really hope it will work fine with both my Canon 90D and my M50 to be able to upgrade the level of my youtube videos and other paid works....however, your video helped me a lot to get enough strength and press the "buy button" on Amazon. Thank you!
Glad to hear that😉
Sir does it support canon 200d mark 1?
Yes you can mount it for sure. I am not sure about the cables.
What mount did you use for the follow focus?
Original plate
Thank you for the review! Did you try the BMPCC 4K with the Olympus 12-40 2.8? Thanks!
I didn't..i don't have the 12-60 2.8
@@MAUROSFILMS maybe with 12-35? or something manual.
I want to see the microshake with this gimbal.
Hi! Thanks for the great video. Just ordered the aircross 2. It's not possible to power the bmpcc4k by the gimbal, is it?
Would be great to compare this to the Ronin SC
Any chance you're doing a comparison to the Ronin SC? I have the SC but really like the idea of more options for mounting longer lenses. Have been hearing that the AirCross 2 has jittery footage. Have you tried the new firmware? Thanks for the great content!!
Hey..i didn't experience any jitters. I have the latest firmware
@@MAUROSFILMS Thanks for the reply. Is the AirCross 2 a better option than the Ronin SC? Wondered about your thoughts on this.
@@mikemuller3357 Yes...if you need more weight payload..definetely
Hi, thanks for your useful review. Do you know if this gimbal can work with the Nikon D7500? Thanks
Yes..it will work perfectly
Hello. What is the product name of the part used to mount ifocus-m on top?Thank you^^
Is it useable with canon 5d mark 4 and 24-105 II ?
How do i take pics and record video through the Aircross 2 ? I have a Canon EOS 250D .
Do you think this can fit in a Peak Design backpack with a Canon EOS R, RF24-105 and a Mavic Air? If yes I’m going to buy. Thanks
Mauro, with the Weebill I can move the camera to any position with my hand and it stops/stays at that spot. Can you do the same with the Aircross 2 and/or Ronin SC? Thank you!
Does is compatible with canon 200d?
Hello. Do you think I can work with the sony a7s ii + 24-105 lens? I want to buy air cross 2 but 24-105 it's heavy lens. will be good ari 2?
It should work perfectly. Check the Lens and body mounting options on the Moza page for the Aircross 2
@@MAUROSFILMS tnx
It's compatible with Sony A6000+ kitlens?
Yes...sure
Mauro - Thanks for the video! In your opinion, will this gimbal balance and function well in upright and underslung modes with an A7 + 24-105 Sony lens?
Hi
I'm familiar with the zhiyun weebill lab
because a friend has it, and I have used it a lot and I am fascinated with his work, but I would also like to try the aircross 2 wench; especially for its vertical recording function
Do you think it's a good choice?
Great review. Do you charge the BM with the gimbal?
I love the way you speak! you should review more stuff
Hi buy thise moza but why is freezeeng when i go to setting
I need help my app can´t to connect with the gimbal, can see the signal bluetooth but cant connect, do you have any recomendation?
Did you have the last app update? What phone are you using?
can you share the portability aspect a bit more? is it a one-piece? thank you in advance
So can it hold GH5 with Sigma 18-35 and speedooster?
How it works with A6000+ and lens like Tamron 28-75 2.8?
Would Aircross 2 function well with Lumix S1 and 24-105 f4 lens?
Thanks for the in-depth review Mauro, I'm considering it as my first gimbal. Do you think it would handle well a Sony A7iii with a 24-70 GM?
Yes i will. It's listed on the official lens supported list for the Moza Aircorss 2
@@MAUROSFILMS Awesome! Thanks for the quick reply :) Keep up the great work
@@mvannetti Always here to help😉
Thank you for the review Mauro. While the BMPCC 4K and a Sigma 18-35mm probably will not work very well, I have found that it is possible to balance an original BMPCC (HD) and Sigma 18-35mm (camera is in a half-cage).
Great! Can you make bccpc4k test with samyang lens if is possible mount with lens adapter.
I don't own any Samyang lens that will adapt to the Blackmagis sadly... i have the 35mm e-mount version
I thought I'm gonna sell my air 2 for aircross 2, but now I'm sure I will sell Weebill lab to order aircross 2 🙂. Thank you Mauro!
You are welcome 🙂
Thanks for the re-upload. I guess my answer was there in the last few min of video. Hopefully the setup of a73 with Sony 16-35 would be perfect for this.
hey, great video also if I buy the Moza Air Cross 2 but my camera isnt listed in the compatibility list will I still be able to use it (my camera is the Canon EOS 200D/SL2
thanks man, you helped me!
What is the manufacturer of this gimbal “origin country”?
Shenzen- China
Awesome vid man. Ty!
Tanks
bye weebill..., btw thanks for the comprehensive review mate !, Indonesia is also waiting this stuff to be officially sale, but just wondering how good it is compared to the ronin sc, cause for my pov, small and compact gimbal needs at least a stabilizer in lens or in body to produce sweet smooth footage and no more post work for the footage, ronin sc or aircross 2? 😅
It's a matter of payload capacity and having that extra bit of power more than you need. Just like when you need that extra power to surpass a car....
@@MAUROSFILMS oh cheers mate, that's answer my question, i forgot to mention about payload capacity 😅
How do i connect my Sony6400 with mozaair Cross 2, cable not connecting
Switch off the Smartphone Camera control on the Sony and tur on the PC+Camera connection. It shoudd work perfectly
Do you see any problems with the footage? many are reporting jittery footage, battery problems (motors dont work well under 25% battery) and cheap build quality???
funny how at 10:05 he says he was making the weird jitters and the gimbal was not causing this. i dotn trust this reviewer, his first impression video was ALSO uploaded on the Gudsen youtube channel. so... there is some heavy bias gonig on somewhere.
@@DigitalGenki Exactly this review should not be trusted. Seems sponsored by Moza.
My Moza Air 2 gets kinda heavy after a while...so tempted to get this
great review! Thanks
Thanks
thx! Can u make some shoots with bmpcc4k + manual lens?
You shot with Sony, but there are lenses with stabilization.
And it will not be a completely honest test. :))
Gh5 + sigma 18 35 ?
Definitely not without counterweights...too front heavy.
@@getfmlr Yep
@@MAUROSFILMS does that mean the Sigma 18-35 will be front heavy for most cameras on that gimbal (or any other gimbal, for that matter)?
Finally! (Again 😅)
Yes.. i didn't check the export file😅
@@MAUROSFILMS I see. The review was great! Do you think it handled the a7iii + 16-35 f4 well? And would it be possible to use a7iii + 24-105 f4 without any jitters?
I own the ronin S with the sony a7iii, tammy 17-28 and 28-75.. the ronin is nice but heavy! waiting for more reviews on this or black friday lol
Thanks - so it tops the SC and Weebill.
Yes..it can handle the bigger payaload doing the same things that the others to does.
@@MAUROSFILMS and what they don't do!
WOW the weebill is so much smaller, Hurry up Zhiyun gimbal s.
That's going to be the decider.
And so much less payload...trust me. I am using it too...
@@MAUROSFILMS So this is better than the weebill s ?
@@bacharoudeh It can hold some more weight
@@MAUROSFILMS iam really stuck i dont know hat i need to buy the weebill s or the moza aircross 2 but i like the hand of the moza more , have you updated your moza ? did they fix it ? pleeease answer me
3 months ago Sold my weebill , such a waste of money , very weak . Now when I want to buy moza air 2 , comes the aircross 2 , but after look this review I think I'll go buy the workhorse moza air 2
You can never go wrong with the workhorse!
@@MAUROSFILMS let me get this straight , so for the motor power quality for the lightweight gimbals are RONIN SC >> AIRCROSS2 >> WEBILLLAB is this correct ?
I'm quite depressed, since I got my Moza AirCross 2, I have my BlackMagic Pocket Cinema 4K and I still cannot use it as I want. For example, I cannot put on ANY way the Focus motor to be fixed with original parts from Moza. Mauro! You, here, in this video, DOESN'T talk about Mounting at all. Kinda frustrating, since the title says, mounting options. I will be much more happy to have the details of mounting. I personally kinda HATE that only one screw holding the whole camera on the plate. And you NEITHER used original parts to fix the Follow Focus Motor.
You obliviously using an AndyCine Vlogger to mount it and I have no idea, what else, since there is a plate on the Vlogger.
I found other UA-cam channel, there been fixed with the Rig, the BMPCC4K. I cannot fix with the Rig neither, after I cannot balance, the plate getting too short. And each time take off the whole Rig and mount it back, when needed is MORE than a pain. An useful video about this in the real life will be very appropriated!
I have Tilta cage and I have an SmallRig cage for my Atomos Shinobi and I doesn't have really idea, which parts I looking for to get my setup full. I don't know this parts name, what is compatible with what. Such a tiring progress to get trough. And I got no idea, who I can ask for assistance. I'm even living in Germany as Hungarian, means, I have to look the parts in German or try to type in English - in many cases, for example, on amazon.de, there is find with English words too. But my point that in the description as in the video, you neither mention anything about the AndyCine Vlogger or anything else, you was using to get this work!
So, just like everyone else, this guy stuck a cable in the battery with ZERO EXPLANATION ON WHICH CABLE AND WHERE THE CABLE GOT POWER TO GO INTO THE BATTERY! HOW DO YOU CHARGE THE BATTERY?
Amazing review. Great feature rich gimbal I’m just not stoked on the wobbly footage I’ve seen in multiple reviews on this gimbal. I know these things can be rectified in post but I’ve literally never seen that wobble on a Crane 2 which my buddy uses with a 1dx ii. Really want the most stable gimbal for my buck it’s a shame both features and stability can’t often be found in one package.
Most of the footage is filmed with a 55mm lens running😅 Talking about wobbling...
Big big big Videomaker... By Sicilia island (Italia).
Even better now ^_ ^
Thanks
Dude I thought this is about bmpcc 4k , but most of it its with sony a7.
Hi I wanted to ask you I have the blackmagic 6k mounted on a Slider and I would like to make an approach movement to an object How can I use an automatic follow Focus to keep the object in focus? CIAO Paolo from Italy
Thank you moza
no, the batery for this moza is sucks
So, again, another "IN DEPTH" review but NO INSTRUCTIONS HOW TO CHARGE THE BATTERY!
It's at 1:39. You just remove the battery (or not, it can also be charged while attached to the gimbal) and plug it into a USB charger.
Thanks for the exelent tutorial! My question is in what distance is the app stil working fine in mimic or remote mode? Thanks!
About 15-20 meters