I was taught to look at the bottom tailblade and assume it was the rudder, so left stick left rudder and the same for the right stick then you only have to check which way the pitch arm goes for left yaw (usually to the rear) then make sure the gyro drives the arm that way when you rotate heli to the right. Simples
Hey bro wanted to let you know that I'm currently battling to get my Oxy 4 and Protos 380 setup with Spirit FBLs and your videos have helped me a good amount. Thanks!
Click on auto save, makes things easier, don't always have to go back and forth and for tail blade directions gyro or radio I always look at the trailing edge of the blade in the direction I want it to go I want my helicopter to go left I looked at the trailing blade to go left, if I want them to go right, trailing edge of the blade goes right, much easier to remember
Just shoot me an email at kuskye25@gmail.com and I will reply with the files of both OpenTX and EdgeTX. You must use the companion computer software to add the model to your radio.
First you will need your radio setup properly to do it. ua-cam.com/video/Grf4YCgfXv8/v-deo.html Then you will need to enable it in the spirit software. @14:30 in this video ua-cam.com/video/Ogx4T7mZij4/v-deo.html Make sure that on your diagnostics tab in the spirit software that it is working once complete. You will see it move the gyro and also set stabilization to enabled on the dignostics page when you flip the SH switch.
was wondering if you can send me the files for the radio setup, I am on edgetx v2.8.0 FlyingDutchman. I tried to follow your other video and I got lossed. Thanks
You are the man Simon!!!! I fought this for hours and now I have it. Thanks SImon
Anytime, glad to have helped!!
I was taught to look at the bottom tailblade and assume it was the rudder, so left stick left rudder and the same for the right stick then you only have to check which way the pitch arm goes for left yaw (usually to the rear) then make sure the gyro drives the arm that way when you rotate heli to the right. Simples
Hey bro wanted to let you know that I'm currently battling to get my Oxy 4 and Protos 380 setup with Spirit FBLs and your videos have helped me a good amount. Thanks!
Awesome!!!!
Click on auto save, makes things easier, don't always have to go back and forth and for tail blade directions gyro or radio I always look at the trailing edge of the blade in the direction I want it to go I want my helicopter to go left I looked at the trailing blade to go left, if I want them to go right, trailing edge of the blade goes right, much easier to remember
This was great; thanks!
Just shoot me an email at kuskye25@gmail.com and I will reply with the files of both OpenTX and EdgeTX. You must use the companion computer software to add the model to your radio.
Can you explain how to set up the auto-leveling function on the Spirit FBL unit?
First you will need your radio setup properly to do it.
ua-cam.com/video/Grf4YCgfXv8/v-deo.html
Then you will need to enable it in the spirit software. @14:30 in this video
ua-cam.com/video/Ogx4T7mZij4/v-deo.html
Make sure that on your diagnostics tab in the spirit software that it is working once complete. You will see it move the gyro and also set stabilization to enabled on the dignostics page when you flip the SH switch.
@@NomisRC So from what I can see you have to enable auto Rescue and a negative gyro setting in the unit, right?
Question, I got four spirit units, I don't see auto level on any of them, how do you set that up?
was wondering if you can send me the files for the radio setup, I am on edgetx v2.8.0 FlyingDutchman. I tried to follow your other video and I got lossed. Thanks
Sure just email me @ kuskye25@gmail.com
File sent. Enjoy!!!
@@NomisRC Got it and thank you