ECCENTRIC FOOTING DESIGN (COLUMN IS AT EDGE OF THE FOOTING)
Вставка
- Опубліковано 19 вер 2024
- When there is a property line and we need to provide the column at the edge of the footing then there is a moment due to eccentricity is generated. Hence , we design these types of footing with consideration of this moment also.The steps are same as previous video of eccentric footing design.
EXCEL DESIGN SHEETS FOR RESIDENTIAL BUILDINGS/ G+ 1,2,3 AND SO ON , FOR COMMERCIAL BUILDINGS, FOR PUBLIC BUILDINGS USED FOR STURCTURAL CONSULTANT/ARCHITECTS/STUDENTS/DRAFTSMEN. THESE DESIGN VEDIOS ARE MANULLY DESIGN METHODS BY USING INDIAN CODES LIKE IS 456: 2000, IS 875 PART 1,2,3,4,5 , SP-16 FOR DETAILING, SP 34 HANDBOOK. STEP WISE BUILDING DESIGN COULD BE DONE IN FEW CLICKS BY USING THESE EXCEL SHEETS.
This footing have negative footing base pressure due to BM due to eccentric footing and hence the footing will not be in contact with soil also the SBC value does satisfy
Nice lesson sir it will be very use for me ...sir can i have a file of Excel sheet ? Thank you sir its very useful..
Plz.verify the value of Qmax, Qmin because when one value is matching other differs.
Qmax and Qmin , depends on the formula= P/ Ast provided (+/-) M/z (+/-) Mex/z , hence accordingly values will be calculated and changes accordingly..
If u like the video, plz like it share it with your friends and colleagues, watch other videos too on design in my channel, plz subscribe my channel as I use to upload the new videos frequently....
Thanks for watching and keep learning..
Excellent
Thanks a lot..
Hi bro , i need footing excel sheet for column is on edge of the footing
Will upload soon
Dear sir,
Kindly share your excel sheet please. It is useful for me. Thank you.
i have a question,
How come the computation of net upward soil pressure specially on moment due to eccentricity have only + sign? in which moment due to eccentricty will produce tension on the side farthest the column right?
That's why we need to choose our Area of footing ( L x B) such that , the qmax < SBC and qmin >0 , if qmin is less than 0 , then we will get tension on that side which is the condition where footing tries to lift up due to the tension, hence in any case the condition of qmax and qmin should be satisfied..
Please explain Sigma Max and sigma Min... How did you choose bd^2 value?
Mex is eccentric moment, hence stress= Mex/(I/y) where I= ( bd^3/12) / (d/2), hence , finally stress due to moment. = 6 Mex/ bd^2.
Hope u understand..
I think the dist.as lx needs to be corrected. How it is 2.85m instead of 2.6m .Plz.clarify.
Yes u r right, it has been modified accordingly...
Let me know what other types of design Excel sheets are required...i will make n upload.. Thanks for appreciation..🙏🙏🙏
Sloped roof design as per is code Excel sheet would be helpful for learning
Hi @civilsmart, shall we allow negative pressure on the footing base?
Yes.
Thank you for your response, but if you see the previous comment history, you mentioned that we can increase the size to avoid negative pressure(tension)
In my case I don't want to increase size _ Also could you please share me if you have any thesis or article mentioned that negative pressure can be allowed,
Thanks and much appreciated your response
Nice lesson Mr Engr. Can I have a copy of the excel file? It will be a great help for me as I’m starting my career as a licensed civil engr here in the Philippines. Thank you so much!
Mail me on bhattdeepak352@gmail.com
Sir... your Excel sheet best
.....but sir can u convert Excel program in dekstop application
Yes, sure
This info is very useful. Can i have Excel file. Thanks in advance.
Mail me on bhattdeepak352@gmail.com
I have sent request to this email
😭
Very informative video engr! I'm starting my Civil Engineer career here in the Philippines, can I have a copy of your excel file? that would help me a lot to start accepting projects. Thank you in advance!
Yes of course!
Send me mail on bhattdeepak352@gmail.com
Hi, could you please share the footing Excel sheets.
Thank you
Send me mail on bhattdeepak352@gmail.com
Can i have a copy of this excel sheet
Full complete Course includes all the sheets as under:
IN FOOTING DESIGN SHEETS
1. Isolated square footing
2. Isolated rectangular footing
3. Combined rectangular footing (Slab Type).
4. Combined rectangular footing (Beam & Slab Type).
5. Trapezoidal footing design
6. Strap beam footing design
7. Footing with uniaxial bending
8. Footing with biaxial bending
9. Pile foundation
10. Pile cap design 3 & 4 piles
11. Wall footing/ Strap footing
12. Raft Foundation ( Beam and Slab Type).
13. Combined footing design (Beam and Slab Type).
14. Eccentric Footing Design ( Column at dist. X from edge).
15. Eccentric Footing Design ( Column at Edge of footing).
16. Strip footing design ( having 4 columns).
17. Pad Square Footing Design.
IN BEAM DESIGN SHEETS
1. Singly reinforced beam design sheet. ( Beam Size known).
2. SINGLY REINFORCED BEAM design ( Beam Size not known).
2. Doubly reinforced beam design
3. Continuous beams design with point load having
2-span continuous beam
3-span continuous beam
4-span continuous beam
5- span continuous beam.
4. Cantilever Beam Design.
5. T- BEAM Analysis sheet.
IN COLUMN DESIGN SHEETS
1. Axially loaded column design
(a). When column size is known.
(b). When column size is not known.
2. Column with axial load with uniaxial moment ( on 2 sides and 4 sides reinforcement)
3. Column with axial load with biaxial moment
4. Mux and Muy Calculation sheet.
5. Short Circular axially loaded Column ( Dia is known).
6. Short Circular axially loaded Column ( Dia is not known).
7. Long Column design.
IN SLAB DESIGN SHEETS
1. Cantilever slab design sheet.
2. Simply supported slab design sheet.
3. One way Continuous slab design sheet.
4. Two way Continuous Slab design sheet.
5. Two way simply supported slab design sheet.
6. Flat Slab Design With Drop Only
7.Flat slab design without column head and drop
8. Flat Slab Design With Column Head and Drop.
IN STAIRCASE DESIGN SHEETS.
1. Dog legged staircase design. (Well Size know).
2. Dog Legged Staircase design ( Landing And flight width known).
3. Open well staircase design.
IN RCC WATER TANK DESIGN SHEETS.
1. RCC WATER TANK RESTING ON GROUND (L/B 2).
3. UNDER GROUND WATER TANK DESIGN (COND.: TANK IS EMPTY AND OUTSIDE SOIL IS SATURATED).
4. UNDERGROUND WATER TANK ( TANK IS FULL AND NO OUTSIDE SOIL PRESSURE).
5. UNDER GROUND CIRCULAR WATER TANK.
6. Overhead Circular Water Tank.
7. INTZ Tank design.
8. Box Culvert Design.
IN WALL DESIGN SHEET
1. RC WALL DESIGN SHEET.
2. RETAINING WALL DESIGN SHEET.
3. BASEMENT RETAINING WALL DESIGN SHEET.
4. COUNTERFORT RETAINING WALL.
5. SHEAR WALL WITH BOUNDARY ELEMENT.
BUILDING LOADS CALCULATION SHEET.
COST ESTIMATION SHEET.
What will be the total cost of spread sheet?
Mail me on bhattdeepak352@gmail.com
WhatsApp on 9899462529
Great info can you share this excel template
Mail me on bhattdeepak352@gmail.com
Can u make staircase design ... especially chain link type staircase
Send me the layout plan whr u need chain link type staircase.
@@civilsmart get me ur mail id
bhattdeepak352@gmail.com
Whtsapp no. 9899462529
I think qmax, min is wrong
Online classes for structural design is available on weekends, those who are interested can contact on whatsapp no. 9899462529 or mail me on bhattdeepak352@gmail.com for details.
Civil Smart
Kindly share your excel sheet please. It is useful for me. Thank you.
Mail me on bhattdeepak352@gmail.com
Watch Playlist for footing design Excel sheets
ua-cam.com/play/PLkqoTjOQIev4ehjLWuKBktp4YJDBIk4lS.html
if you please share this excel sheet
Mail me on bhattdeepak352@gmail.com
WhatsApp on 9899462529
Nice, can i get this excel sheet
Yes, sure
Watch Playlist of Water Tank design Excel sheets
ua-cam.com/play/PLkqoTjOQIev5Fifj5K63FIMBehmLFf4lK.html
Can I buy this Excel.sheetv
Yes sure
WhatsApp me on 9899462529
sir please excel file me for rafrance sir
Mail me on bhattdeepak352@gmail.com
WhatsApp on 9899462529
This type of footing should be avoided and it's not economical too, for edge columns strap footing is the good one.
Agreed , this is not as much economical, we can choose strap beam footing or combined footing for corner footing, but some cases if it's not possible to go for strap, than the shoe footing is provided..
excel Spreadsheet please?
Mail me on bhattdeepak352@gmail.com
WhatsApp on 9899462529
Full design Excel sheets course
pmny.in/fImMpS8bprSP
(different types of footings,slabs, staircases, different types of columns, beams, Water Tanks, retaining wall, basement wall,shear wall,cost estimation etc)
hello sir i buy ur file but not give any mail plz send my my file
Kindly chk your mail..pl
Please provide excel
WhatsApp on 9899362529
Note: Contact only on bhattdeepak352@gmail.com or WhatsApp on 9899462529 for the sheets, no other number pl.
Civil Smart
If anyone wants to learn how to make these design Excel sheets.. contact me on whatsapp 9899462529 or mail me on bhattdeepak352@gmail.com
To get all the footing excel Sheets get from below link:
pmny.in/EJw9hyDmCno7
Full design Excel sheets course
pmny.in/era02LAqXt8B
Full Course includes all sheets as under:
IN FOOTING DESIGN SHEETS
1. Isolated square footing
2. Isolated rectangular footing
3. Combined rectangular footing
4. Trapezoidal footing design
5. Strap beam footing design
6. Footing with uniaxial bending
7. Footing with biaxial bending
8. Pile foundation
9. Pile cap design 3 & 4 piles
10. Wall footing/ Strap footing
11. Raft Foundation ( Beam and Slab Type).
12. Strip footing design ( 4 columns).
13. Eccentric Footing Design (Column at dist x from the edge of footing).
14. Eccentric Footing Design ( Column is at Edge of the footing).
IN BEAM DESIGN SHEETS
1. Singly reinforced beam design sheet
2. Doubly reinforced beam design
3. Continuous beams design with point load having :
2-span continuous beam
3-span continuous beam
4-span continuous beam
5- span continuous beam
4. Cantilever Beam Design.
5. T-beam Analysis.
IN COLUMN DESIGN SHEETS
1. Axially loaded column design
(a). When column size is known.
(b). When column size is not known.
2. Column with axial load with uniaxial moment ( on 2 sides and 4 sides reinforcement)
3. Column with axial load with biaxial moment
4. Mux and Muy Calculation sheet.
IN SLAB DESIGN SHEETS
1. Cantilever slab design sheet.
2. Simply supported slab design sheet.
3. One way Continuous slab design sheet.
4. Two way Continuous Slab design sheet.
5. Two way simply supported slab design sheet.
6. Flat slab design (without drop and column head).
7. Flat slab design with drop only.
8. Flat slab design with column head only.
IN STAIRCASE DESIGN SHEETS.
1. Dog legged staircase design.
2. Open well staircase design.
IN RCC WATER TANK DESIGN SHEETS.
1. RCC WATER TANK RESTING ON GROUND (L/B 2).
3. UNDER GROUND WATER TANK DESIGN (COND. TANK IS EMPTY AND OUTSIDE SOIL IS SATURATED).
5. UNDERGROUND WATER TANK ( TANK IS FULL AND NO OUTSIDE SOIL PRESSURE).
4. UNDER GROUND CIRCULAR WATER TANK.
5. Overhead Circular Water Tank design.
6. Intz Tank design.
IN WALL DESIGN SHEET
1. RC WALL DESIGN SHEET.
2. RETAINING WALL DESIGN SHEET.
3. BASEMENT RETAINING WALL DESIGN SHEET.
4. Counterfort Retaining wall design sheet.
5. Shear wall design with boundary elements condition.
Building load calculation sheet
Cost estimation sheet..etc.
Need this sheet but didn't get your email or WhatsApp number
Mail on bhattdeepak352@gmail.com or WhatsApp on 9899462529
Hi, could you please share the footing Excel sheets.
Thank you
Hlo, mail me on bhattdeepak352@gmail.com
To get all the footing excel Sheets get from below link:
pmny.in/tr805L0x2FTX