Це відео не доступне.
Перепрошуємо.

The Day I Flipped My Mini Skid

Поділитися
Вставка
  • Опубліковано 26 січ 2022
  • This happened to me a while back. But I wanted to take the time to share this so hopefully it helps prevent this from happening to someone else. Mini skid steers are very easy to tip over due narrow tracks on the machine. BE CAREFUL! Take your time and never rush. If an area seems sketchy, AVOID IT! Lastly if this does happen to you, DO NOT START YOUR MACHINE! Take it to your dealer and have them go over it. If oil goes past the O rings in the engine the engine could fail, maybe not right away but prematurely.
    Follow me on Instagram: / jcslawntips

КОМЕНТАРІ • 59

  • @kevinrumsey3756
    @kevinrumsey3756 6 місяців тому +2

    I tipped our Ditch Witch SK850 a few years ago. It's not necessarily the grade that gets them, its getting them cockeyed or off camber and all it takes is a little rocking or shifting of weight to one side too much. Good on you to call the dealer. We didn't call the dealer, it smoked a bit, but was fine once that was burnt off.

  • @Ed-gp3zr
    @Ed-gp3zr 2 роки тому +3

    Glad you posted this incident, this can happen with any machine that has a bucket and is easier to tip with articulating machines all the way up to large loaders. Good training video. Glad you were not injured!

  • @olanserv
    @olanserv 4 місяці тому +1

    I had same problem a few years ago. It was SK750. It laid on its side for a few hours before I put it back on its feet 😅. Couldn’t start the engine, couse oil got into the cylinders and engine got seized. All I did, I unscrewed glow plugs and cranked the engine for a minute to get rid of oil from cylinders. Put glow plugs back and started the engine. It produced smoke for 15 minutes until oil leftovers were burned out. Added some oil to the engine and never had any problems since.

    • @mikel9567
      @mikel9567 2 місяці тому

      Your engine wasn't seized if you were able to start it.

  • @calzskilz
    @calzskilz 2 роки тому +10

    Ran these little guy's on plenty of jobsites, hauling around 24" & 36" box tree's up & around some treacherous terrain & have never even felt like I was going to tip the machine.
    Work smart & operate with caution. Human error here, your bucket was loaded, lifted & you went over the mount of dirt with one track.
    Lessons learned here.

    • @jlbush8249
      @jlbush8249 2 роки тому +2

      Thinking the same thing...user error.

  • @robertschmidt6383
    @robertschmidt6383 Рік тому +1

    Life is a learning experience. Glad your machine is all good again. Happy digging. 👍

  • @deanstackhouse8775
    @deanstackhouse8775 Рік тому +2

    I was thinking about using one of those on my property but have realized now that it's to steep. I wondered if you can widen the track on this model.
    Thanks for covering that issue so thoroughly.

  • @brendonpartridge6362
    @brendonpartridge6362 2 роки тому +1

    Hey jc lawntrip a nother awesome videos on your channel alot every day u are awesome UA-camr and your video is helping my lawn care business grow from your video that didn't look like a fun ride keep up the great work

  • @wyattslawnmaintenance5456
    @wyattslawnmaintenance5456 2 роки тому +2

    Sorry to hear that happened man! This might be a little long winded but as helpful as mini skids are I think they are one of the worst things for the industry also. They make the barrier to entry easier for people and they are so much easier to tip than a bigger machine. My sk 600 got tipped over by a friend that was using it. Every picture or video I’ve seen of one tipped the loader arms were raised up. Having them down would save a lot of accidents but they are just dangerous in general. The only good thing is your not stuck for the ride you can get off it. Glad you’re okay and the machine is good to go. I think you could have done the service yourself and saved the time to get it to the dealer and paying them to do the work. It’s pretty easy but I understand the peace of mind. Stay safe!

  • @rlawn
    @rlawn 2 роки тому +2

    Sorry to see that it happened but glade to see your ok and sharing this with us.

  • @davidcampos5844
    @davidcampos5844 9 місяців тому +1

    I just tipped mine. Luckily I have a 12 ton winch to move it around. Great video!

  • @CalebKennizzite
    @CalebKennizzite Рік тому +1

    Sorry you had to go thru this.
    But I’m glad you & your nearly-new mini-skid were not damaged.
    Taking time to make a video of the painful experience for the benefit of others…undoubtedly prevented someone else from inadvertently doing the same thing.

    • @jcslawntips
      @jcslawntips  Рік тому

      Sometimes we gotta learn the hard way. I appreciate the kind words very much! That’s the main reason I posted it is to bring awareness to the situation so people know what to do to save their machine and possibly how to prevent it from happening to them. Thank you for watching!

  • @concerned_2023
    @concerned_2023 2 роки тому +3

    I've used that brand before and I have had it on all sorts of angles. Never had it tip over. You have to take it slow and feel what the machine is doing.
    Not sure what you were doing when yours went over.
    I've used all brands of that style of machine.

  • @-CHaPPy-
    @-CHaPPy- 5 місяців тому +1

    if you feel it get tippy, slam that bucket down. Its a life saver. Watching your video... You had the bucket way too high while not on flat ground. Was this a test of stability? Otherwise I have no clue of what you were trying to do at the time of your rollover

  • @CalebsPropertyMaintenance
    @CalebsPropertyMaintenance 2 роки тому +1

    That’s unfortunate. Had I tipped over that Bobcat I rented to redo that lawn, I would have been screwed. I honestly didn’t even give it a second of thought. Thankfully, that didn’t happen. I totally agree, take it to the dealer. Better safe than sorry.

  • @mnzvful
    @mnzvful 5 місяців тому +1

    I just tipped a Kubota scl 1000 2 days ago im glad you walked so i could run

    • @victorinho8673
      @victorinho8673 4 місяці тому

      just flipped mine today to the side what did the dealership tell you?

  • @robertsandgamble247
    @robertsandgamble247 2 роки тому +1

    Glad you are ok, but honestly that's why I would go with the wider tracks. I am not saying that you made a bad choice or wider tracks solve all the problems, but for me it just seems would help somewhat. Stay safe brother, god bless!

  • @MIGHTYX2010
    @MIGHTYX2010 Рік тому +3

    Determination right here. This could very well happen again hopefully you'll be safe if it does not get hurt but I think you should invest the amount of time you spent on loading this thing into learning how to service it yourself if a shop's only charge you 400 bucks that means it doesn't take a lot of time. Figure out what you need to do so in the future it will only take you a couple hours to get your machine started again good luck. Keep operating!

    • @jcslawntips
      @jcslawntips  Рік тому +2

      Thank you Paul, I totally agree I try to do just about everything myself. This was one thing I wanted to make sure I didn't screw up and mess up a new machine

  • @philipunderwood477
    @philipunderwood477 5 місяців тому

    At least you were safe and learned some good lessons

  • @johnalbrecht7850
    @johnalbrecht7850 Рік тому +1

    Yes I flipped my 600 about a year ago and I didn’t wait long enough before starting and you guess it I bent a rod 😩

  • @lincolnuland5443
    @lincolnuland5443 2 роки тому +3

    Keep a Farm Jack in your trunk on skid days y'all

  • @juanantonio674
    @juanantonio674 Рік тому +1

    Gracias por compartir. Saludos cordiales desde Patagonia Chile

  • @troybodle
    @troybodle Рік тому +1

    Operator error unfortunately evey machine has it's limitations keep bucket as low to the ground as possible when tramming and digging & never load trailer on uneven or unstable ground

  • @dagooos
    @dagooos Рік тому +1

    Tip when you feel it start to tip drop that bucket

  • @manonfirelj
    @manonfirelj Рік тому

    Been there done that. We just have to be careful.

  • @berkoskilandscaping4247
    @berkoskilandscaping4247 2 роки тому +1

    Sorry that happened man that sucks. I really like your bucket though and don't like mine at all. what's the brand of the bucket you have?

  • @isailadino5633
    @isailadino5633 Рік тому +1

    Bro you need plywood on the ramps spray wd40 will slide easy easy I have done that with a bobcat t300.

  • @TRIPLETIGHTTRACKS
    @TRIPLETIGHTTRACKS 5 місяців тому

    When you brought the narrow track and explained to them your plans. That’s when they knew you were going to tip it.

  • @joesalvero7918
    @joesalvero7918 2 роки тому

    Sounds like two hours of labor, did they replace filters? Did they break down what they did?

  • @sionefifita5891
    @sionefifita5891 Рік тому

    Been shopping for a mini for some weeks and with all attachments looking at 60k for a vermeer or ditch witch or mt1000. This is why im changing my mind and deciding to just rent. I think these are money pits

    • @jcslawntips
      @jcslawntips  Рік тому +1

      Depends how much you use it, renting isn’t bad. For what I do I couldn’t imagine not having one

  • @jonathantaylor6926
    @jonathantaylor6926 19 днів тому

    Not sure about these little minis.. they are handy but they tip way too easily when your aren’t even doing anything sketchy.

  • @Pure_KodiakWILD_Power
    @Pure_KodiakWILD_Power 2 роки тому

    Things happen. So, did you call the dealer?

  • @gabrielruvalcaba2310
    @gabrielruvalcaba2310 Рік тому +1

    Dude excellent video and what I like about you took it so well..

  • @gmaster716
    @gmaster716 2 роки тому

    Should of got a ditch witch bro!

  • @adamjerger5970
    @adamjerger5970 Рік тому +1

    U could of run right away if it wasn't running on its side. The dealer stole ur money!!

  • @edwardboyer7102
    @edwardboyer7102 Рік тому +2

    I'll bet you 20 dollars 💸 to ah donut 🍩 you won't flip it again

  • @dekonfrost7
    @dekonfrost7 Рік тому

    Simple is as simple does

  • @KINGSTONSPRIDE
    @KINGSTONSPRIDE Рік тому

    Put a winch in that trailer bro!

  • @thewhiteknight02
    @thewhiteknight02 Рік тому

    Tommy from Vermeer. Ask him about the potato launcher from the tree guy.

  • @sdrammm696969
    @sdrammm696969 2 роки тому

    Yes better b safe than sorry.

  • @ThriftyGarage
    @ThriftyGarage Рік тому

    Lesson learned...

  • @jlbush8249
    @jlbush8249 2 роки тому +1

    Dealer says don't turn the machine on...I turned the machine on..

  • @johnblue8029
    @johnblue8029 Рік тому +1

    Yeah man always call a tow truck it’s what I do or I use my tilt trailer with a winch . You live and learn lol

  • @chucktaylor11000
    @chucktaylor11000 5 місяців тому

    Bucket was clearly to high

  • @timvivoda5208
    @timvivoda5208 2 роки тому

    I've done it 5 times with 3000 hours on many machine's

  • @jonathanstebenne
    @jonathanstebenne Рік тому +1

    i bet it would of started right up 4 hrs latter. u just need to let fluids settle. if its warm that does not take long. next time give it 4-24 hrs check fluids start it up and get back to work... dealers want ur $$$ and want to waste your time, seriously not even a service tech to come out? AS LONG AS YOU DON'T RUNT THE MOTOR WHEN ITS FLIPPED OVER. u should be fine. flipped may machines lol

    • @flat6fever680
      @flat6fever680 Рік тому

      Could be hydro locked and bend rod. Better safe than sorry with machine that cost more than my first house.

  • @cgrizzle3
    @cgrizzle3 Рік тому

    4 men couldn't flip it back over?

    • @jcslawntips
      @jcslawntips  Рік тому

      It weighs 3,500 lbs. didn’t have enough people to lift it so just used a chain, made it easier

  • @gmaster716
    @gmaster716 2 роки тому

    Never buy anything like that at Harbor freight
    Lesson #2

  • @idiotradar1
    @idiotradar1 2 роки тому +3

    Don't care what excuse you use, I have running a Toro mini for 22 years...never tipped. Human Error. You have to be smarter than the machine!!!!!