Nissan No crank no start repair.
Вставка
- Опубліковано 21 сер 2024
- *Want to own the tools I use ?? Click on the amazon link below to get my top 5 Tools I use*
Automotive Test Light- amzn.to/3z1Pdxa
Flexible Backprobe- amzn.to/3Pyr3zO
Multimeter- amzn.to/3PbuT23
OBD Scan Tool- amzn.to/3zaNWnq
Wire Piercing Probe- amzn.to/3OecWhT
In this video I will talk about the power of a simple visual inspection. Customer dropped off a car with a used pcm. Wanted me to reflash thinking that would be the issue. Luckily i didn’t do that. Hope y’all enjoy the video
Disclaimer:
Due to factors beyond the control of Oz Mechanics, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Oz Mechanics assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Oz Mechanics recommends safe privatice when working with any tools or equipment seen or implied in this video. Due to factors beyond the control of Oz Mechanics, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained
**Want to own the tools I use ?? Click on the amazon link below to get my top 5 Tools I use**
Automotive Test Light- amzn.to/3z1Pdxa
Flexible Backprobe- amzn.to/3Pyr3zO
Multimeter- amzn.to/3PbuT23
OBD Scan Tool- amzn.to/3zaNWnq
Wire Piercing Probe- amzn.to/3OecWhT
If you feel like this video helped out, feel free to support the channel by donating. Just one click away on the link below, to help support the channel :)
www.paypal.me/ozmechanics
So true Oz. With us DIY guys a visual is always a cheaper option. Thanks.
Good job Oz. You know it’s just friggin amazing what people don’t do and jump to conclusions so easily. And how much money is wasted because of that? Great learning lessons thanks for that! Doug
That was my issue too, that solution fixed my Murano, Thanks.
Im about to buy a used Murano and it will not start now. Just want know if this solved your problem or do I need to just leave the Murano alone?
Who can assist me I changed my crankshaft and camshaft position sensor and I'm still not getting no signal what do you think ?when I tested the 3 wise that goes into the crankshaft sensor and I'm not getting no negative or positive
Wow OZ I didn't know you had X-Ray vision!! great video again and my thumb went so high I hit the ceiling fan. (:>)
skip56 it’s all the oil that I’ve been exposed to. On day woke up with X-ray vision :)
Thank you Oz. Great job. I appreciate your videos. Have a good night.
Billy Yoder thank you for watching
Just subscribed a few days ago. Great channel and great videos Oz and diagnosis. Look forward to watching more videos!
Hayward's Automotive thank you very much. Will be posting new videos fairly soon
@@OzMechanics In the meantime you have a lot of other videos I'll be watching.
Excellent work Oz
I hate seeing those overpriced DuraCrap batteries in cars. Just this week I warrantied out 3 of the DuraCrap Golds that lasted anywhere from 6 to 9 months and the week isn't over yet. 😒
Mine never last longer than 2 or 2.5 years in AZ. What would you recommend instead?
I have a lafesta that wont start it goes on to ignition but wont start i check starter fuse and those other stuff i even tried starting it from the engine bay but no luck. Wont spark
I just had the same problem in my wife car. Had to replace the battery fuse and one of the connectors that goes in there. 2012 sentra
Very informative. Thanks for taking the time.
MIKE CONT no problem. Thanks for watching
Great job. Oz 1000. Customer 0
What caused the high current flow? Why was the plug burnt? Why didn't the fuse not protect the plug and wire?
Traveler X so what happens here the female connector start to open up on doesn’t get proper contact from the male connector. And when the current is trying to flow from one connector to the other the gap causes friction which cause heat.
Thanks for this video just encountered the same issue with my 350Z question how much of the wire do I need to cut and what do you mean by relocated?
nice job oz man
Can you make a video on how to change the burnt wire?
The car is already gone
Tops bro u are a Good investigator
Good find! 👍
Super Mario Diagnostics easyyyyy money
Nice job mate I wonder why it happened in the first place I wonder if someone maybe try to put jump leads on it and swap them the wrong way🤔🤔
The pins on the connectors looked loose. I pushed in the pins to hold on tighter
@@OzMechanics nice job mate people don't realise a little bit of a gap and a lot of current causes a lot of heat boom💣💣lol
Nice vid.thanks Whats the program for wiring diagram?
C14back2 Nitrogen Mitchell on demand
If I change some fuses and try to crank. And everything lights up but won't start. Would the computer be at fault? I been stuck for over a week on this..
Thank yyoou ,honest man. Thumbs up to uou.
I have the same problem can you show how you changed the wires?
I have a similar problem on 06 Altima 3.5. After an electrical short it lost all the power other than brake lights - nothing else works, no radio no interior light, no hazard lights, no dash lights, no horn, no headlights, no blower, no start...
The main fuse by the battery looks good, cables look good, all three fuse boxes are getting electricity, every fuse is good (12.6V tested), relays are good, ground is good...I'm running out of ideas.
I haven't tested the ignition switch yet but the interior lights don't work and they don't require a key.
Maybe it is the computer in my case?
Did you ever figure out the issue I’m having the same issues, no lights come on dashboard, no crank no start.. it was turning on before with a few attempts cranking it up but now it’s completely unresponsive
@@serenityarmstrong1545 you should check your battery first, make sure it works. If your engine was turning but had hard time starting like you said, it may be a bad battery.
Take your battery to AutoZone or O'Reilly, they'll charge it for free, unless it's bad.
new to your page! Wow!! You are talented and a blessing seriously, make it seem so easy talented! passion kudos to you wish you were in CALI ~lol......having issue with my daughters car 2003 altima it cracks but hisses wont turn on it s crazy :/ she had to tow it home .what do recomend
....................thank you
thanks for the vdeo. woud something like this cause the car to turn off while driing?
load up the parts cannon! but...oooooh he uses k and n !
scuba422123 ooo yea he’s getting 100+ hp
You save me big time I called AAA to jumpstart the Nissan rogue they couldn't but just after I watched this video problem solved by just pressing the fuse behind the battery
Thank you
My father bought a Nissan Blue Bird (2007)
About 2 weeks ago, now this present moment the vehicle is having the same problem
It won’t start, if we are lucky for it to start, it just turn off again within seconds.. Please help
Hey Man Don’t Know If You’ll See This Comment Or Message But My Car Is Having The Same Issue , Won’t Start Either. Sent To The Dealer For A Diagnose And Was Told It Was My ECM , Went And Order And Replaced It And Still Have The Same Issue , Checked Fuses And Half Of My Fuses In The IPBM Aren’t Working And Half Are , Also My Battery Seems To Die Completely Out And My Fans Constantly Keep Running While I Have Car On ACC. Any Feedback Would Be Appreciated Or Recommendations. Thank You
Ecm has to be reprogrammed if you bought a new one
@@OzMechanics Yes That’s The Thing I Brought/Order It Already Programmed To My Cars VIN. Basically A Plug And Play
thanks
Good morning OZ, pls I have the same problem with my 2008 Nissan Sentra ECM. How much is the cost of ECM . I am in Nigeria. Thanks
Can you send me the link of that video that you fix from resistor( it was not starting)
What would make a 1998 Nissan Altima would not crank or strat
What caused the wire burn in the first place?
Good day, I need assistance my car doesn’t start.I have no idea why
🙏🏿
I heard a story of a dealership replacing two transmissions and two ECMs and it turned out to be a fuse.
How to bypass program ECU nissan
Chingon me horraste una feria gracias
De nada. Gracias por ver mi video
What causes that?
1st BOOM
Plenty of fuel in that puppy , enough to drop it off at the mechanics shop, let him deal with it. ..
What's the name of that piece ??
Plz assist my car is just like this one
CAN YOU NEXT TIME SHOW US HOW TO REPLACE IT LIKE..... CHRISFIX DO ?
Sorry my channel shows more electrical diagnosis problems. Thanks for watching
my x trail dont wont to strat
Okay burned out wire.
Bro my nissan. Will not start.
Please help
?
P