I did mention in the video that normally the engine would have the front and back together at the same offset and the middle two at the opposite offset, BUT this is a video game and it doesn't matter so I just did the front two and back two.
how do i make the torque of the engine bigger instead of the rpm, btw im having a bit of a problem, the engine throttle part is stuck at 90 degrees angle idk why, so every time i start the engine it just goes full power all the time non stop, some one know how to fix this?
"Peak Volumetric Efficiency" is the total accessible torque. "Peak Volumetric Efficiency RPM" is where that torque is accessible. If the throttle is stuck open, make sure "Idle Control Min%" is turn down or even off. You can also set your "Idle RPM" lower. by default it is 500.
So helpful, thanks
this i4 crank angle offset 💀
I did mention in the video that normally the engine would have the front and back together at the same offset and the middle two at the opposite offset, BUT this is a video game and it doesn't matter so I just did the front two and back two.
@@AlMagmaGaming yes, the most important thing is that the firing order is at equal intervals within 720 degrees
@@MereanaM-actually 320 because according to my tests the engines are two stroke
They are 4 stroke.
I've tested it and some people have also found it in the files.
@@AlMagmaGaming oh ok thank you for the information probably my test was wronh
thanks bro
I built it but it's not starting please help 😭
First question.
Is it spinning?
@@AlMagmaGaming yeah it spins and I figured out why it wasn't starting, it wasn't starting because I didn't turn on the damn cylinder head 🥲
@@AlMagmaGamingit literally took me 4 whole hours to figure that out!!! 😭 Rn my brain is cooked 😭
The crank is spinning but say zero rpm
It needs to be the powered crank, it needs to be mounted to a block, and it needs to be connected to a piston for a value to appear.
I got it working but It can't rev above 500rpm
Do you have a keybind on the throttle?
@@AlMagmaGaming Yes but it still doesn't do anything
@AIMagmaGamimg you can test and rate my house/apartment building from GearBlocks Workshop?
I took a look at it.
I think it might have been better to make something smaller. That way, you would be able to do even more detail work with it.
how do i make the torque of the engine bigger instead of the rpm, btw im having a bit of a problem, the engine throttle part is stuck at 90 degrees angle idk why, so every time i start the engine it just goes full power all the time non stop, some one know how to fix this?
"Peak Volumetric Efficiency" is the total accessible torque.
"Peak Volumetric Efficiency RPM" is where that torque is accessible.
If the throttle is stuck open, make sure "Idle Control Min%" is turn down or even off.
You can also set your "Idle RPM" lower. by default it is 500.
@@AlMagmaGaming thanks problem solved
how do i stop a hand cranked engine?
I usually add a disk brake to the belt system used to power the alternator.
Wrong engine head for that crank
Hmm?
-30 second gang