Hey Joe. Doing similar swap but starting with a marine power jetpac. I need to add powersteering back to the accessories. What did you use for the accessory drive?
my MasterCraft Maristar 225 VSR has an LS1 Corvette in it, and it goes ok. Should there be any problems swapping it out with a 6.0 with another 100 hp?
I appreciate it but it would take me days to figure out a parts list most of the stuff is in the video new supercharged motor and 25 foot outlaw coming soon
Yeah she ran great, 2 footers what max to feel comfortable cranking on her. The wakes I hit in that vid where from a big sea ray type boat and at 65 mph I used my judgement and slowed down, lol. Check out my new video with my new suoercharger motor!
@@6.0joelsx60 I had to buy the shorter Holley aluminum oil pan for the 2011 GMC totalled pickup truck LC9 5.3L V8 aluminum engine i am installing in my 22 foot fish ski boat.
I don't that why I made the video because I feel like I would forget half the parts lol but if you have any question just ask away... that boat is sold and have a new 25ft Baja I'm building with a 408 and lsa blower
@@roadwarrior4615 considering I bought the boat for $1500 with no motor or drive I would say yes it went faster... I think that boat goes 62 mph with a 454 big block check out my other videos I sold that boat but too the motor out and supercharged it and put it in a new boat!!
Wow. LS on 🌊 water. Impressed!
I’m currently doing a LT4 swap from marine engine deport in plaquimine Louisiana I can not wait
Badass boat. Good job.
Looks like you have figured it out. Great Job
Oh yeah! I did 3 boats so far each one improves
Thanks for the info. Awesome job
Badass bro!
Hey Joe. Doing similar swap but starting with a marine power jetpac. I need to add powersteering back to the accessories. What did you use for the accessory drive?
Man, that's sweet !
This is badass. I want to do this for my Ski Nautique. LT1-LT4
That would be sick! I have a new vid coming soon of my new boat with an lsa supercharger!
my MasterCraft Maristar 225 VSR has an LS1 Corvette in it, and it goes ok. Should there be any problems swapping it out with a 6.0 with another 100 hp?
Parts list please !!! Really nice set up. Thanks for the video. 👍👍👍💪💪💪
I appreciate it but it would take me days to figure out a parts list most of the stuff is in the video new supercharged motor and 25 foot outlaw coming soon
im about to ls swap my boat i just nee to know more about the cooling system and how the exhaust set up is
That sounds simply fuggin fantastic!! She doesn't like rough water does she? That's fuggin savage though and I bet the video doesn't do it justice.
Yeah she ran great, 2 footers what max to feel comfortable cranking on her. The wakes I hit in that vid where from a big sea ray type boat and at 65 mph I used my judgement and slowed down, lol. Check out my new video with my new suoercharger motor!
What temperature is your engine running at with that Hardin marine thermostat?
No issues with the wideband?
The engine runs at 120 and oil at 180 . The wideband goes bad every month or so but I just use it for tuning and then I don't need it anymore
Any recommendations on a cam if you were to build it again? Hardin marines cams are back ordered
Damn that sucks check out iroc-x on UA-cam he put a truck cam in idk what one
I’m trying to figure out how the wideband is able to get a reading. Doesn’t water go through those risers???
It's a dry riser but some water comes back in due to reversion the wide band sensor only lasts for a few weeks it's only for tuning
I'm curious as to why you need the Hardin thermostat housing? Doesnt the thermostat for the truck go in the water pump?
Because the Tstat is where the fresh water comes in at the "lower hose" you need water going into to block first
@@6.0joelsx60 oh. That makes sense. Thank you.
You're just using a stock water pump? They're trying to sell me a marine specific pump...
Also, what did you use for mounts?
Stock truck water pump, I used Hardin marine mounts
hey Joe, do you remember what you did for flywheel? running into issues with that right now.
@@DerekIwasiuk I used an LS7 flywheel that I had laying around and it worked well
This is awesome. I would love to throw an ls3 in my Baja. What bellhousing and flywheel did you use? Is the tuning done with Holley?
Stock ecm for tuning ls7 flywheel stock bravo 1 engine couple and bell housing
@@6.0joelsx60 what software are you using for tuning? HP tuners?
@@98snakehorse yes HP tuners I just data log I don't tune myself
Marine engine deport in plaqimine Louisiana has drop in options ls1 - lt4 options
@@NolaH-sb4vf staring at $14,000... I have less then that in the whole boat
Just out of curiosity, what brand and grade of Engine oil do you use in it?
I used 10w40 mobile one diesel oil
Hello. which exhaust manifold? what brand of exhaust manifold?
exhaust manifold fits well?
Marine power, Hardin marine and imco marine all fit the same and extremely well and the risers line right up to the factory thru hull
Joe, where did you find the Marine Power manifold by itself? I can only seem to find the full manifold and riser kit
What throttle set up? I’m assuming it’s no longer fly by wire
It is all drive by cable are used the stock, boat throttle cable and I rigged it to a stock truck throttle cable
Are LS engine boats worth it / reliable over regular motors?
Hell yeah big block power lighter and more rpm!
who would give it a thumbs down sheesh. LQ9 stock other than the cam? what did you do for oil pan?
Stock truck oil pan
@@6.0joelsx60 ah cool. hopefully wont suck all the oil up.
@@DerekIwasiuk never had to add a drop
@@6.0joelsx60 I had to buy the shorter Holley aluminum oil pan for the 2011 GMC totalled pickup truck LC9 5.3L V8 aluminum engine i am installing in my 22 foot fish ski boat.
What cam are you using and what are you setting your rev limiter too
Hardin marine cam rev limiter was set at 5500 but the motor would only rev to 5000
Check out my new video
Rips 👍🏻
Dude, do you have a build blog on this?
I don't that why I made the video because I feel like I would forget half the parts lol but if you have any question just ask away... that boat is sold and have a new 25ft Baja I'm building with a 408 and lsa blower
@@6.0joelsx60 nice. looking at ditching my 5.7 mercruiser in my bayliner the fall
How long is that boat? What's top speed?
23ft top speed 71.9 on gps
Seen another guy on YT that put a 5.3 LS in a 18-19 foot bowrider ran 70 mph a few more tweaks he said he could prob hit low 70's.
This boat ran 72 with a bullshit tune
Was it the 5.7 mercrusier originally?
No this boat had a big block originally but i bought the boat without a engine
@@6.0joelsx60 did you have to find a different bellhousing set up
@@ryanmahoney5311 nope I used the small block bellhousing from my old boat
@@6.0joelsx60 ohh I gotcha I'm planning on having the same project I was wondering if I could swap a 6.0 into a 5.0 mercrusier
@@ryanmahoney5311 yes goes right in you just need a bravo one engine couple they hold up better
I want to do this to my glastron carlson cvx18
That would be sick with a big cam 5.3
What leg are you running ?
Bravo one 1.50
Do you run a speed sensor
No just a gps Speedo but it's not in the data log
@@6.0joelsx60 Cool, Good job with this thing
6.0 joe ☠️☠️☠️☠️☠️
Rpm at wot and speed?
Just about 5000 still tuning tho and I have a 25 p prop to try out too
66.7 gps
You should have showed the speedometer!
Then you wouldn't of been able to see how good looking I am
@@6.0joelsx60 lol
However, the whole idea of repower is gaining mph? Right
@@roadwarrior4615 considering I bought the boat for $1500 with no motor or drive I would say yes it went faster... I think that boat goes 62 mph with a 454 big block check out my other videos I sold that boat but too the motor out and supercharged it and put it in a new boat!!
@@roadwarrior4615 it went 72 on gps before I pulled the motor
*through