Philadelphia Eagles Custom Football Helmet Build

I custom built a Philadelphia Eagles football helmet from a game-used helmet. This is the process from start to finish. All products used are listed below:
PREP
Plastic Trim Remover Tools: amzn.to/47JSKPY
Elmer's Sticky-Out: amzn.to/45oZqkP
Goo-Gone: amzn.to/3so9JqJ
Dunlop Lemon Oil: amzn.to/3EbuJUl
Bondo Spot Putty: amzn.to/3YTniKX
3M Sanding Sponge: amzn.to/3Pcwnvl
PAINT
Emerald Green Pearl Spray Paint: amzn.to/47Px2tK
Clear Coat: amzn.to/45nzhTD
Honeywell Multi-Purpose Respirator: amzn.to/45olP1Q
3M Paint Respirator: amzn.to/3QUrM2e
Sandpaper (1500-7000 Grit): amzn.to/3PaCksq
Sandpaper (1000-3000 Grit): amzn.to/45kZiCU
Dremel: amzn.to/44kPuaF
FINISHING
Meguiars Ultimate Compound: amzn.to/3smlduN
Meguiars Ultimate Polish: amzn.to/3EbcRc9
Meguiars Liquid Wax: amzn.to/3sqEUSp

[@costanzaman42]

I was reading something by a guy who does these helmets a lot and he said clear coats tend to fade and change color over time. Not sure how long he means but do you have any experience with that happening?

[@LiL13izzy7]

Not yet, I've only done a few helmets. I guess it depends on the quality of clear coat you're using. Some are more expensive than others, probably for a reason. I think the one I used is meant for cars. Also, if yellowing ever did occur, I imagine it would show more so on white paint, so if your helmet isn't white, I think it should be fine.

[@touleechang]

Where can i buy the cushion for the under side of the helmet since i got a replica so i can put it on for some comfort? Thanks in advance

[@LiL13izzy7]

The replica helmets are slightly smaller than the real ones. They also fit into specific holes in the real helmets, so you will likely not be able to fit them correctly. You can find them used on eBay though, and give it your best shot.

[@matt8325]

Might be a good idea to wait 5 or 7 days after you paint the helmet before you put the finish coat

[@LiL13izzy7]

Thanks for the tip - I'll keep that in mind for the next build. Can you provide any explanation why?

[@mikel5529]

Really nice results from painting with a rattle can! It's amazing to see people selling "custom" helmets on ebay for hundreds of dollars that are covered with orange peel. It only they took as much care as you did.

[@LiL13izzy7]

Thanks! I agree about the amount orange peel helmets I see on eBay. It is a little daunting to scuff up a fresh paint job, but once you get over it, the results are worth the trouble.

[@mikeandmindirankin5686]

Do you have to use automotive paint ?

[@martinezricky0790]

Where did you get your stickers for jt

[@LiL13izzy7]

eBay

[@austinhuhs]

Can I ask how much $$ you were all in for?

[@LiL13izzy7]

About $220. Lots of variables can bring the cost up or down. I found an affordable helmet that had a good facemask that didn't need reconditioning, which would have cost another $30 or so. Hope that helps. Let me know if you have any other questions.

[@raufali71]

Amazing build. Would love to see a kelly green helmet build 👏

[@sharonwebb9800]

Did you just print the stickers? And how did you do/where did you get the front 3D Eagles logo? Love you're work. Planning on making this in the near future for the Eagles & Cardinals for our hone decided decoration. ♥️💚♥️💚♥️💚♥️💚

[@LiL13izzy7]

I bought the decals and 3d bumpers from eBay.

[@WalkDownOnEm]

This was a nice video. Spot on build

[@LiL13izzy7]

Thanks!