Do I spy Kev's inner chav coming out again 😉😂 He's got the hoodie, all he needs now is a pair of grey joggers, white trainers and a satnav programmed to McDonalds 😂😁
TOP TIP I've owned my 2005 ST150 14 years now, but 1 time driving home it began to misfire, engine light on, I checked the code P0300. It was my fault, I jet washed the engine water had got passed the HT leads and was sitting around the spark plugs so at higher rpm the spark was arcing outside of the cylinder. Water gone it's been absolutely fine since. Just in case you experience this, that said loved watching your progress with this car, can't commend you highly enough for saving from scrap.
Congratulations on getting to 38,000 subscribers and well done with all your hard with repairing and collecting the salvage cars and the same with the videos as well
For a car that was end of life "Brilliant" just shows there's life in the old dog yet. Unfortunately can't get to Devon Qantas is only flying Aussie's back home!
A few buckets of elbow grease - can't go wrong. It's certainly scrubbing up very well, so picking up on a couple of comments in your last weekly vlog where you mentioned a turbo and air ride kit - don't do it!!. It is a one year only model with the naturally aspirated engine,so will only become rarer and more desirable,so keeping it close to stock will only enhance its value more. If you do decide to keep it, the only things I would spend money on would be security devices. Thanks for posting and looking forward to the next video
Fair do's Kev, she does look good after the polish 😉 I (personally) would have given her a clay bar after the snow foam. Also you could have saved yourself a lot of work by giving her a ceramic coating, available on Amazon & gives your paint a 9H protection lasts for at least 5 years and it's hydrophobic which means easier cleaning 😀 Nice looking car now though 👌
get them alloys replenished n powder coated by the pros .. I think Nottingham Zinc does powder coating .. I remember seeing some rims going in their spray booth many years ago when I was there on an assignment
What a transformation! You will have to find out which lorry you are able to take to Devon Truck show and start on that one😉 look forward to the next one
Well there was me thinking all lorry drivers were hairy arsed buggers 😂. And as for your next door builder. I thought red dewaf had come on the tv again. Looked like kryton or however it's spelt 😂. Sorry sir if your reading this.
Hi kev what a great car you have now and what a difference looking very good well done looking forward to seeing you start on the interior now good video cheers
Looks awesome now. Just a little tip with even more work (Not a criticism) before cutting back using a mop, for the best results possible you should clay bar the car after it's wash. Great results as it is though.
She looks lovely mate! All that hard work is really paying off! You need to get rid of that awful chrome expansion chamber cap tho 😬 just get a standard one off Ebay!
Great video kev. It's looking really well now on the outside. I always use the autoglym products on my own car when get a chance to so it. It's good stuff and a good price. Looking forward to the interior video.
I get my snow foam in Rainham Kent Ferry Lane only £25 for 25 ltr's so if your passing like you do it recommend this product Unit 1-3 Albion Trading Estate, Salamons Way, Rainham RM13 9UL you would have to park up the road a bit as tight and no turning.
@@KevTee Road is beaten up and when you get to the T junction is an right straight on, dont drive up there as you cant turn, Shampoo is same price for 35 ltr also
AutoDoc are a great place to buy from, just don't be fooled by the cheaper lines, bought a window regulator for my VW, paid less than £30 for an aftermarket one, low and behold it broke within a couple of months, ended up having to buy the OEM for closer to £60. Buy cheap, pay twice!
its looking great kev but dont tell the wife she will want you do do that car too but its scrubbed up nice it is over half way done now weel done hope to see you at the truck show devon cheeeeerrrrrrrs lol
I cringe when seeing the pressure washer on the engine bay, don’t know why I have in mind the engine can’t get wet, a bit like your phone or smthing lol but car looks great good job
your polishing in circles causing paintwork swirls ...up and down or side to side stops the swirls cars looking great though dont forget to ceramic coat its so easy to apply polish on wipe off makes cleaning the the car in the future so easy
Waste of good polish there mate, don't spend anymore on polishing that turd up keV, stonechips all over the shop shows your wasting it Ok job though overall
Do I spy Kev's inner chav coming out again 😉😂
He's got the hoodie, all he needs now is a pair of grey joggers, white trainers and a satnav programmed to McDonalds 😂😁
Enjoying these scrapyard challenges
TOP TIP I've owned my 2005 ST150 14 years now, but 1 time driving home it began to misfire, engine light on, I checked the code P0300. It was my fault, I jet washed the engine water had got passed the HT leads and was sitting around the spark plugs so at higher rpm the spark was arcing outside of the cylinder. Water gone it's been absolutely fine since. Just in case you experience this, that said loved watching your progress with this car, can't commend you highly enough for saving from scrap.
Thanks Mark, I'll keep an ear out for any misfiring 👍
Congratulations on getting to 38,000 subscribers and well done with all your hard with repairing and collecting the salvage cars and the same with the videos as well
Hope you are staying safe and well and hope you have a good weekend with the family
For a car that was end of life "Brilliant" just shows there's life in the old dog yet. Unfortunately can't get to Devon Qantas is only flying Aussie's back home!
You picked it up as an end of life vehicle, now it's anything but end of life! Looks like it's just rolled off the production line 👍👌
Great work Kev -she looks great
A few buckets of elbow grease - can't go wrong. It's certainly scrubbing up very well, so picking up on a couple of comments in your last weekly vlog where you mentioned a turbo and air ride kit - don't do it!!. It is a one year only model with the naturally aspirated engine,so will only become rarer and more desirable,so keeping it close to stock will only enhance its value more. If you do decide to keep it, the only things I would spend money on would be security devices. Thanks for posting and looking forward to the next video
What a fabulous job you’ve made on the Fiesta ST, can’t wait to see the interior cleaned up.👍
Great job kev like you say it's hard work all that polishing but we'll worth it when they are done
Kev the Fiesta is looking good
Been waiting for this good job kev
Can't wait for you to do the interior
Fair do's Kev, she does look good after the polish 😉 I (personally) would have given her a clay bar after the snow foam. Also you could have saved yourself a lot of work by giving her a ceramic coating, available on Amazon & gives your paint a 9H protection lasts for at least 5 years and it's hydrophobic which means easier cleaning 😀
Nice looking car now though 👌
Yeah time was against me on this occasion, next time I'll have the clay bar out and a ceramic coating at some point 👌
get them alloys replenished n powder coated by the pros .. I think Nottingham Zinc does powder coating .. I remember seeing some rims going in their spray booth many years ago when I was there on an assignment
What a transformation! You will have to find out which lorry you are able to take to Devon Truck show and start on that one😉 look forward to the next one
Coming along nicely well done mate 👌
You're doing a brilliant job on that wee fiesta, looking forward to the next vid.
Well there was me thinking all lorry drivers were hairy arsed buggers 😂.
And as for your next door builder. I thought red dewaf had come on the tv again. Looked like kryton or however it's spelt 😂. Sorry sir if your reading this.
Great job Kev, giving me inspiration to do my car, with 3 kids it soon gets grubby.
Beautiful little fiesta st mate you have done a wonderful job 👍🏻 BIG RESPECT kev & stay blessed 👍🏻😎🙏🏻💯💚
Great job kevtee, she's looking good you did a cracking job 😂😂👍👍
Hi kev what a great car you have now and what a difference looking very good well done looking forward to seeing you start on the interior now good video cheers
Hi kev what a great job on the car take care 👍🏻
it looks amazing Kev, you do such a great job on these cars. Keep up the great work.
Hi Kev another brilliant video as always and looking forward to seeing your weekly video on Sunday
She looks absolutely beautiful Kev just some centre caps needed for the wheels and she will look like new
i would leave it as it is kev it looks really nice the way you have done it mate
Looks awesome now. Just a little tip with even more work (Not a criticism) before cutting back using a mop, for the best results possible you should clay bar the car after it's wash.
Great results as it is though.
Looking forward to seeing what your next project will be
New lease of life for a scrapper. Cracking job 👍 what make is your washer?
Well Kev seeing you did such a great job on that car as a practice , when up in Aberdeen nip in past mine as I've got a Fiesta could use some TLC.
Great job kevtee looks like a new car and love the colour
Great vid kev! The car is coming along nicely. Looking forward to the next upload. 👍👍
Looking good. Great work and thanks for sharing this with us take care
She looks lovely mate! All that hard work is really paying off! You need to get rid of that awful chrome expansion chamber cap tho 😬 just get a standard one off Ebay!
looks great fabulous colour to show off the shine
Really like your hat
Great video kev. It's looking really well now on the outside. I always use the autoglym products on my own car when get a chance to so it. It's good stuff and a good price. Looking forward to the interior video.
looks great yep keep it all same colour kev cheeeerrrrrssss
Good Wednesday evening to you sir
I get my snow foam in Rainham Kent Ferry Lane only £25 for 25 ltr's so if your passing like you do it recommend this product Unit 1-3 Albion Trading Estate, Salamons Way, Rainham RM13 9UL you would have to park up the road a bit as tight and no turning.
Thanks, I've got it noted and will call in next time I'm in the area as I need a top up of supplies 🤙🤙🤙
@@KevTee Road is beaten up and when you get to the T junction is an right straight on, dont drive up there as you cant turn, Shampoo is same price for 35 ltr also
The hood up was to hide the fact that he paid @Scott Andrews £60 to do the polishing for him 😂
That would of been a bargain 😂😂
Good one Kev keep them coming.
AutoDoc are a great place to buy from, just don't be fooled by the cheaper lines, bought a window regulator for my VW, paid less than £30 for an aftermarket one, low and behold it broke within a couple of months, ended up having to buy the OEM for closer to £60.
Buy cheap, pay twice!
Hi I've used t ~ cut on my headlights from my trent fiesta,same as ur's except 1.4 d.....
Nice one Kev, thanks. 👍
8:49 cracking part of the video 😜
Oh Kev please tell me you clay barred the car before polishing it
Awesome as always kevtee
Great job looks amazing
Bostin job fella! When can you do mine lol
Great video as always
its looking great kev but dont tell the wife she will want you do do that car too but its scrubbed up nice it is over half way done now weel done hope to see you at the truck show devon cheeeeerrrrrrrs lol
Nice car now kev looking good mate
Trev has the UK's stock TFR.....
God I hated carrying autodocs brake etc packages as courier lmao! It's easy for the customer but not so much for the poor delivery guys
Lovely
hi my name is Liam Woods and i am inspired by your videos
I cringe when seeing the pressure washer on the engine bay, don’t know why I have in mind the engine can’t get wet, a bit like your phone or smthing lol but car looks great good job
so cool🎉
when u finished i have a ford focus 1.5 needing polishing mate lol
Great video kev
Great vid Kev
gReat videos mate as usual ...btw what is the name of the song @ 4:00 please?
Great job fella.. Anybody know the name of the song first played in this please..
What is your daily car?
what cutting compound did you use please Kev?
Any links to the products you use?
No clay barring first
Time was against me but clay bar will certainly be done in the near future 👍
your polishing in circles causing paintwork swirls ...up and down or side to side stops the swirls cars looking great though dont forget to ceramic coat its so easy to apply polish on wipe off makes cleaning the the car in the future so easy
how did you make the snow foam not runny
I am braking a fiesta st if you need any parta
Breaking
Waste of good polish there mate, don't spend anymore on polishing that turd up keV, stonechips all over the shop shows your wasting it
Ok job though overall
Too much truckers bum in that video lol
detailing have we adopted Americanisms ? use proper English!!!!