マイターソーを使った新しい加工方法
Вставка
- Опубліковано 10 бер 2024
- マイターソーを使ってお皿を作る方法を考えました。
木工旋盤持ってないし…鑿で掘るには難しい。
そんな時はこの方法を試してみてはいかがでしょうか?
主要な主要な寸法は動画内に記載してあります。
安全に十分配慮して作業を行ってください。
ショート動画を毎日更新しています!
チャンネル登録&高評価をよろしくおねがいします。
#diy #木工 #jig #治具 #woodworking #japanesecarpenter - Навчання та стиль
Ottimo lavoro. Complimenti. Ciao 🖐️ Fabrizio Torino 🇮🇹
What if you used the saw to "drill" from the start? At the end, when you are done making all the cuts, you clean up the piece by simply rotating it under the running blade. Of course, you can't simply cut deep into it and just rotate it once, but you can sink it 1mm in, rotate once, 2mm, rotate, ... you know what I mean?
you can, but also it would wear the blade faster and put extra strain on it, because those blades aren't really "rigid" when it comes to side pressure
Если поднимать диск еще выше, можно растянуть видео на целый день!
Why your not use moon shape drill bit it’s cut in one minute like dough maker blade shape is . 🌙
このユーザーの動画は他のサイトで沢山盗用されています。
Not very safe to do that
С помощью этого метода нельзя разбогатеть, но можно потерять здоровье😢
Risky. Additional clamping of workpiece could easily be made, but this is an excellent job and you did exercise great care. Thank you
뭔가 마음편해지는 영상 감사합니다
Thank you for these wonderful videos ❤
wow, i'm stay in Brazil, i love your job. Thanks
Very nice work ❤❤❤❤❤❤❤❤❤❤❤❤❤😊😊😊😊😊😊😊😊😊😊
This video made it to Facebook. Put watermarks on your videos so you get the credit from them
品質の高い設備は必要だと思います。これらのこぎりの多くはメカニズムにいくつかの遊びを持っており、それは欠陥につながります。いずれにせよ、アイデアは非常に独創的です。(Du très bon matériel est nécessaire ici. Beaucoup de ces scies ont du jeu dans le mécanisme. Cela crée des défauts à l'infini. MAis pour dégrossir une forme, l'idée reste excellente.)
Good "out of the box" thinking.
I would suggest making a plywood tool, similar to an open end wrench, to turn the piece. If the blade somehow grabbed that piece, whatever happens, would happen in the blink of an eye.
Additional clamping of the work piece that still allowed it to rotate would be useful.
Wow good luck for you my friend🤝
If you placed it off center what kind of shape would you get? Oval? Egg shape?
I think you'd get a circular hole but it would be something of a torus depending on the amount of offset and depth of cut. Certainly having the pivot point inline with and well ahead of the blade would make a torus.
I know its a bowling ball holder that i haven’t used in 55 years lmao and pour epoxy resin over the entire thing
Maybe rotate counterclockwise also?
Amazing knowledge 👍👍♥️♥️
I will explain to you how to carve each and every thing
旋盤よりやりやすいのかな
классная такая деревяная пепельница❤😂
切るだけでなく
切り出す発想に👍✨
Hello! How can we make IKEA bowl like easy?
Amazing
У меня есть такая пепельница , но из мрамора !
あれ、サンドペーパー掛けなきゃなのか
Берегите пальцы рук😂
Could I get the song?
スライド丸のこのストッパーは自作ですか?
このマイターソーは標準でこの仕様です
Why not use a nail instead of a dowel so you don’t have a big hole to fill on the other side?
Compra torno y deja ya éso
What the frk do you use it for
Ashtray
How many teeth per inch is the saw blade?
👍👋🇧🇷😊
🇧🇷👍
Как эту плашку потом использовать в быту?
Güzel olmuş ellerini sağlık en yakın zamanda bende denemeye çalışıcam 😊
Absolutely dangerous. It is not worthy to risk your hands in a such a way for that poor result.
He is using superbly sharp blade and using very light cuts. I think it would be simple to make additional clamping if the work piece onto the mounting block.
I agree that it would be dangerous for an inexperienced person, but the video proves that with extreme care the danger is limited. I’m going to try it with clamping the workpiece. You are right to warn. Circular saws and chop saws are dangerous all the time.
Don’t try this at home
Eu não entendi nada para que isto serve
Пепельница, например.
Segurar uma bola de futebol😂🤣🤣😂🤣🤣 design muito top, mas pouco útil
Это пример того, как не надо делать. Для таких работ есть фрезер или стамеска.
Думаю и диску писец будет
А как фрезером или стамеской так же ровно сделать?
С прямыми руками получится ровно
@@user-ei2os7ub1wждём ваше видео с прямым руками) ато пистеть каждый умеет)
И что там опасного?
На двухсторонный скотч приклеить и не нужно отверстие в изделии делать😂
можете насать сюда😂❤
"I thought about how to make a plate using a miter saw.
I don't have a wood lathe...it's difficult to dig with a chisel.
In such a case, why not try this method?
The main dimensions are listed in the video.
Please work with due consideration to safety.
We update short videos every day!
Please subscribe to the channel and give us a high rating."
А главное зачем?
日立の電ノコやん。何人?
Dangerous 😢
Potentially yes. But with care and additional clamping I would be willing to try this.