How To - Subwoofer Settings on Pioneer NEX Receivers 2017

Поділитися
Вставка
  • Опубліковано 18 жов 2024

КОМЕНТАРІ • 38

  • @JJman6547
    @JJman6547 6 місяців тому +1

    Speaker level settings is what saved me lol, I changed to this pioneer deck from an older one installed everything the same but the sub was barely moving, and now I’m gettting bass, thank you, you saved me from possibly getting screwed over at an audio shop 😅

  • @oldgoatninja919
    @oldgoatninja919 5 років тому +4

    Maaaan, I’m so glad I found this video, I thought I messed up on install when sub wasn’t producing sound lol. Didn’t know I had to turn it on in settings.

    • @deckerdotto6035
      @deckerdotto6035 5 років тому

      You can find more videos about Pioneer AVH-420NEX here: ua-cam.com/video/mHpVfoueoEE/v-deo.html and you can find more videos from Pioneer here: ua-cam.com/users/pioneerelectronics

    • @jimbola77
      @jimbola77 3 роки тому +1

      LOL!!!! ME TOO.

  • @brettoberry3586
    @brettoberry3586 5 років тому +2

    Awesome video, thank you for the help.

    • @deckerdotto6035
      @deckerdotto6035 5 років тому

      You can find more how to videos on Pioneer AVH-4200NEX here: ua-cam.com/video/mHpVfoueoEE/v-deo.html and you can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics

  • @DarkKnight-ki6jf
    @DarkKnight-ki6jf 6 років тому

    Great vid just had the Avic 8200 installed very helpful video.

    • @deckerdotto6035
      @deckerdotto6035 6 років тому

      You can find a playlist of videos about Pioneer AVIC-8200NEX here: ua-cam.com/video/mHpVfoueoEE/v-deo.html

    • @DarkKnight-ki6jf
      @DarkKnight-ki6jf 6 років тому

      Thanks!

  • @oshwaflz
    @oshwaflz Рік тому

    I have an infiniti i30, which has a subwoofer, however, according to the wiring diagram, its only hooked up to the bose amp, and theres no wiring in the stereo bay for the sub. This means that the subwoofer rca plugs are not being used... if i turn on subwoofer in the settings will it use my sub through the amp or do i need to manually wire it up to use those settings?

    • @pioneerelectronics
      @pioneerelectronics  Рік тому

      Please be more specific with your question. Do you have a Pioneer product in your vehicle?

    • @oshwaflz
      @oshwaflz Рік тому

      @@pioneerelectronics i have a dmh-1770nex

    • @pioneerelectronics
      @pioneerelectronics  Рік тому +1

      @@oshwaflz OK Great. Please be more specific with your question. I don't clearly understand what you're trying to do and how I can help.

    • @lrrj31089
      @lrrj31089 Рік тому

      ​@@pioneerelectronics I believe he's talking about the OEM amplifier and stock speakers. He's asking do the subwoofer settings effect the subwoofer without it being directly hooked up to the pioneer unit.

  • @tr6864
    @tr6864 2 роки тому

    Hello, may I know what is the lowest frequency available for the subwoofer setting in this head unit ?

    • @pioneerelectronics
      @pioneerelectronics  2 роки тому

      Please be more specific with your question. Do you mean the lowest crossover frequency? If so, the lowest LPF crossover frequency setting on the Pioneer AVH-2300NEX is 25Hz. Pioneer NEX in-dash receivers are designed play from 20 Hz to 20 kHz.
      You can learn more about using a crossover on a Pioneer in-dash receiver in this How To video from Pioneer: ua-cam.com/video/WvJXYh6vk_0/v-deo.html
      You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics

  • @Jay-iw2zf
    @Jay-iw2zf 6 років тому +1

    So quick question my radio won't let me turn the subwoofer on? I can click it over and over and it stays off and won't let me turn the subwoofer on to get the settings..any ideas?

    • @deckerdotto6035
      @deckerdotto6035 6 років тому

      What model number of in-dash receiver are you using? Are you using a Maestro RR adapter in the system? Or other bus adapter for access to factory amplifiers? You can find more videos about Pioneer AVIC-8200NEX here: ua-cam.com/video/vNHEvsZ5JKc/v-deo.html

    • @darriusholt
      @darriusholt 5 років тому

      Im having the same problem with my nex 2330. The subwoofer plays, but there is no turning it on from the menu. I also set my eq to custom, but now I can't set it to anything else.

    • @rickharrison6969
      @rickharrison6969 5 років тому

      darriusholt did you connect the sub to the RCA subwoofer specified input in the back?

  • @schecter7x
    @schecter7x 7 років тому +1

    Any recommendations on these levels? I'm looking for nice clean tight bass. Listen mostly to rock music. Thanks

    • @pistoleromendozacompton1698
      @pistoleromendozacompton1698 6 років тому +6

      Rob on mine I stay between 65 and 80 hrtz and 12 slope. In that setting I can play mostly any genre music without a problem. But of course you need to adjust your amp too. For example I have a 2000.1 Brutus amp powering 2 12" NVX 124 on 1 ohm. My amp I set it half ways in the gains. That way I don't have to have to open my trunk to adjust my bass I will control everything from my head unit. The only thing I adjust is the Subwoofer setting on the Radio...since my crossover is set at 65 at 12 slope.
      Everyone's ears is different. One thing you can do is go to an empty parking lot close your windows and play with the settings. And then see how it sounds with windows open. It might take you a bit of time to set it perfectly to your tune. Good Luck.

    • @x3sergiox3
      @x3sergiox3 6 років тому

      Carlos Mendoza I just install 2 12" pioneer w304R max is 1,300w where should I have my setting... I also have a bass control

    • @armstrongrodriguez3030
      @armstrongrodriguez3030 4 роки тому +1

      Have a sub control , i listen to trap bass music , anyone please , whats a good setting i want to control all of the bass from the bass control.

  • @corysutton
    @corysutton Рік тому

    HELP! I’m needing major subwoofer help (sound in general) for DMH-1770NEX

    • @pioneerelectronics
      @pioneerelectronics  Рік тому

      Please be more specific with your question. You have a Pioneer DMH-1770NEX in-dash receiver, OK great. What else do you have? What vehicle make, model, year? What are your speakers? Do you have external amplifiers? Do you have a subwoofer? Self-powered or external amp and sub ?
      You can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics

  • @vipersnake0175162
    @vipersnake0175162 6 років тому

    So this is not available for the avic 8000 nex?

    • @deckerdotto6035
      @deckerdotto6035 6 років тому

      The audio settings on Pioneer AVIC-8000NEX are very similar. You can see it in this video: ua-cam.com/video/iIkjs805bEk/v-deo.html You can find more videos about Pioneer AVIC-8000NEX here: ua-cam.com/video/tTMITI0sDsI/v-deo.html and here: ua-cam.com/video/bpua5ed-IcA/v-deo.html and here: ua-cam.com/video/PJU7J0dZAdY/v-deo.html

  • @dyroneturner3742
    @dyroneturner3742 Рік тому

    Jensen radio setting for subwoofers

  • @mr_nonebetter
    @mr_nonebetter 5 років тому

    How do i know exactly which double dins have network mode so i wont buy the wrong one?

    • @deckerdotto6035
      @deckerdotto6035 5 років тому

      As of 2019 January, this 2-DIN with a screen list has network mode: AVIC-W8400NEX, AVIC-W6400NEX, AVH-W4400NEX, AVH-600EX, AVH-601EX, AVH-500EX, AVH-501EX, AVH-1400NEX, AVH-1440NEX, AVH-2400NEX, AVH-2440NEX, MVH-1400NEX, MVH-2400NEX. All have network mode. If you have a question about a particular model, give me the model number. You can find more information about Pioneer Standard Mode and Network Mode here: ua-cam.com/video/WvJXYh6vk_0/v-deo.html and how to change between Network Mode and Standard Mode here: ua-cam.com/video/PeH_h8UHzBw/v-deo.html You can find more videos on Pioneer's You Tube Channel here: ua-cam.com/users/pioneerelectronics

  • @jonathonhoskyns4812
    @jonathonhoskyns4812 Рік тому

    I need help I can’t turn o n my sub it won’t let me click on it I have the pioneer mixtrax

    • @pioneerelectronics
      @pioneerelectronics  Рік тому

      Please be more specific about the Pioneer in-dash receiver model number. The model number is typically written near one of the corners of the screen and begins with the letters AVH, DMH, AVIC. Nearly all of them say mixtrax.
      In what screen are you trying to switch the subwoofer output on?

  • @migman903
    @migman903 5 років тому

    Why does my subwoofer have phase and HPF but the video shows lpf in crossover settings?

    • @deckerdotto6035
      @deckerdotto6035 5 років тому

      What Pioneer in-dash receiver model number do you have? You can usually find the model number near one of the corners of the face of the in-dash receiver. Is your system set up in Standard Mode or in Network mode? Are any of these items grayed out? Are you sure you have selected the Subwoofer output from the chart and not the Front Output or the Rear Output?

  • @jimbola77
    @jimbola77 3 роки тому +1

    my battery died and I thought my amp blew!!!.

    • @deckerdotto6035
      @deckerdotto6035 3 роки тому

      If the vehicle's battery is consistently draining when the vehicle is off, it's possible your in-dash receiver or your amplifier are wired incorrectly. Pioneer receivers are designed to automatically switch off when the vehicle is off. This will also automatically switch off any externally connected devices like amplifiers. You can learn more about wiring your Pioneer receiver in this video: ua-cam.com/video/-bF3uzzaT30/v-deo.html and you can find more videos on Pioneer's UA-cam Channel here: ua-cam.com/users/pioneerelectronics

  • @Josiah0344
    @Josiah0344 9 місяців тому

    EXTREMELY HELPFUL SHORTFUL! Thanks brotha!!🫡🤙🏾🤙🏾