Car stalls at red light or stop sign, do this and make you car run like new
Вставка
- Опубліковано 6 жов 2024
- Videos are for Knowledge & Entertainment purposes only.
Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic.
Thank you sooo much. Havent cleaned it yet but i have faith it will work. I am 67 and can not do too much i took my car to shop and was told they would charge me 95 dollars for first hour for diagnosis and if it went over it would be 195 an hour. God led me to your video. God Bless You. yes i subscribed and thumbs up.
Oh darn well I’m grad u found my video try this is is very comming let me know how things goes what year make mode you have abs what the car issue?
Amen Look up and know that Jesus will see you through, he guides and directs us and helps us to save money🙏✝️
I recently just had my VR6 rebuilt and I’ve noticed ever sense the rebuild the car would stall especially at stop signs and traffic lights, I popped the hood and I did a visual inspection and I don’t see any broken vacuum lines or anything like that.
I do remember cleaning the maf sensor out last year but I don’t think it could’ve gotten dirty this quick especially at the throttle body. What else do you think I could be?
Hey man , my car has been doing exactly what you talked about it your video. I thought something was seriously wrong with my transmission, but I found your video and followed all the steps and now it runs great again. A lot of mechanics would of tried to screw me over on it probably but it’s cool to see simple solutions out there. So I appreciate it , best of luck to you, keep up the videos
Nice it’s good service makes a big diffrnce
I still can’t get my car to stop stalling and shuttin off
@@getactivewithlou3386same! Mine says Reinstall intake, and once it shuts off while at a stop a warning light comes on (low oil pressure sensor) and car still stalls. I already changed the oil pressure sensor, mass flow sensor, canister purge valve. It also stalled while driving just going up a small uphill. WTH!
@@RBTheMechanic-keep making videos.i came here to hear what the problem may be,i didnt expect to get turn by turn directions on how to fix it.thanks.earluer today i had my oil changed and air filter.after i left it didnt stsll til a few hows later it started again.i think i need to clean the throttle body now
@@damagekids yes
let me save ya'll 15 minutes:
1. get to your throttle body where you can expose and see it, removing intake ducting
as necessary
2. turn key to on (but don't start engine)
3. put a weight on gas pedal to open up throttle if drive by wire
4. use throttle body cleaner and a rag
5. reassemble
you're welcome.
Thanks so much. I did this to my Nissan Sentra 09 and no more stalls. Start new job Monday where I needed car in good shape.
Videographer Tom nice glad this video helped even tho it was diff make and model. Please subscribe and also subscribe to my other channel the name is rc usa 201
You are an unbelievably charming young man. Thank you for the help!
Haha thank you!!!! I’m glad this got ur ac back up running!!! Good job tackling this job yourself!!!
YOU JUST SAVED ME FROM GETTING RIPPED OFF. THANK YOU SO MUCH!!! GOD BLESS YOU!!!!
No problem always here to help.. send me message for any type of repairs
Thanks for the thumbs up but can you respond to my questions?
@@BlakewrtvKitchen I did respond on the other message well some cars the throttle dosent open like Heep it will not open unless engine is running but I can not do this with engine running... anyways give me ur cars year make and model I will let u know if it suppose to or not ... just because it dosent open dosent mean it’s bad
@@RBTheMechanic I have a 2005 Altima 2.5l engine S. Tried the on ignition position with key 🔑 without starting the engine and pressed the gas pedal and it didn’t opened or made any whining sound.
@@BlakewrtvKitchen well some cars would do that anyways if u want to clean u can use qtip and slightly clean it and then spray some on the Edge of plate and let the engine to the magic it will but it off
So thrilled I found this video!! I’m going to try this on my 2012 Honda accord V6
Didn’t know what was going on but the 1201 code came up for the TAC so hope cleaning fixes this issue. My battery drained too..
Code was actually P2101
I have video on accord as well but 4 cylinder after cleaning u might get higher rpm than expected code then u need to build the idle speed all over it’s common on hondas
I'm really glad that I found your video, I have a Honda pilot VP 2008, about 1 1\2 weeks ago I was at a Red light, as the light turned green I began to accelerate and noticed the vehicle began to stall. I checked the engine oil it was good. I then check the transmission fluid it was above the second Dot. I still couldn't figure out why it was stalling, I have to say UA-cam is great I'm so glad that I found your video I am 5 minutes away from AutoZone where I will go purchase the throttle cleaner spray.
Yeah defiantly do the cleaning in about 30-40k miles these do get lot of build up
My 1991 Honda Accord has been sitting in the back yard for the last 3 years because it stoped running at the stop light. I am going to do this as you have shown on this video. I want to thank you for explaining it as for a 6 year old, very thorough. Thanks.
That car has idler sensor that goes bad you might have to change that try this spray some cleaner inside the hole I will see small port inside
@@RBTheMechanic thank you so much, i will try this!
I have the wife walk around in the garage topless, so that she may assist me with issues like this. It also puts me in a better mood. Thanks for the info. Nice video.
Lol
Thank you for efforts .. well and clear explained .. God bless you
Thank you darling I have Toyota sallará acting out,took it to the mechanic car didn’t stall ,thank for your knowledge 👍🏼
Your welcome always here to help… but Do this service regardless it will make a big difference for longe term… here’s a small trick to get this free services or for half of the charges when ever u go for big service brakes or somthing if ur mechanic is good and u have been going there for long time he prolly can do this for free or lot less. Some times I do that for loyal customers who spend lot …
Great instructional video brother , specially some throttle bodies have a special clear coat idk if its what is called but if you use any other product besides throttle body cleaner it may damage that special coat like brake cleaner , thanks to your videos i replaced serpentine belt , spark plugs , pcv valve and learned and to change brakes on my 03 Camry .. Keep them videos coming , God bless
Nice job!!!
thank you, this helpful content, you save us from scam mechanic. will definitely follow the instructions
Yup watching my videos give u an idea and u can simply ask for the service than being told to do hell of stuff not needed
Thanks for the knowledge sir. You helped me figure out why my car is stalling
Yup no problem!!!
Thank you, RB Mechanic! Your are a God sent, to be a blessing to other people. You have a great effect of showing Love! I already subscribed your amazing channel. God Bless you & your family!
Thank you!!
Thanks your demonstration was very informative. Great job.
This worked perfectly! That saved me so much money
Lancelot Kokojan nice job it works like charm! Please subscribe also subscribe to my other channel here’s a link ua-cam.com/channels/vqsPzqAZfVv_gjBYUFqNdg.html
Thanks! Awsome demonstration on how to clean throttle body and opening the throttle plate without disturbing the computer memory.
norbertonabor yuppp memory gotta be kept alive
@@RBTheMechanic but won't it be relearn again after awhile when the cars driven?
@@rudyguevara9873 some car do some don’t but u might damage it if u yank open the throttle this is best and safest way
The way i cleaned it still open at 14.3 thankyou for showing the proper way
Welcome
THX 4 THE VIDEO !!! You clean the throttlebody so well you could actually hear it close when you took the weight off of the gas pedal I am hoping this is going to solve my stalling problem on a 91 Chevy S-10 with the four. 3 L engine
That might have idle control valve
@@RBTheMechanic it does i had a '92 4.3L S-10
Followed the steps on my 77 280Z. Idle was inconsistent and would stall at stops when cold.
The cleaning helped return the idle to 900 rpms as before. Will check the stalling issues.
jerry nakamura nice awsem I’m sure it will be good idle will adjust lil but in few drive cycles
Please subscribe also subscribe to my rc channel the name is rcusa201
Thanks for your solution you are a good tech.
Welcome
You are a life saver.... my 07 expedition was stalling and already thinking it was gona be an expensive repair.. thanks alot for the vid...
tony garcia did you clean the throttle?
RB The Mechanic yes i did.. bought the throttle body cleaner.. cheap cheap fix...
tony garcia cool nice job!!
My Frontier threw a cam crank position sensor code. Replaced both. Still running the same. I'm going to try this. Thx for the video.
paul Gonzales ok let me kno how it goes and please subscribe also check out my rc channel the name is rcusa201
@ paul Gonzales did you fix your problem? And how?
My 04 Civic, 1.7 non-vortec (200k), was hesitating/surging while cruising and dying at intersections. I removed the EGR valve. There were carbon chunks stuck in the valve of the EGR, holding it open. I used a boar brush and vacuum to clean out the EGR passage. And, wallah!
Nice job!!! Good fix!!!
Thank bro you explained it so clearly good luck bro..
My SRT8 2006 Chrysler 300c will cut off immediately after first crank of the morning, turns back on just fine, then it happened at 3 red lights in a row.
I watched your video l liked the way you explained everything and I subcribed.
I have an Infiniti I30 and ever since I bought the car I randomly stall at red light, slow turns, parking, or while idling. Sometimes it runs good but sometimes it just stalls. Just cleaned the throttle body and the problem didn't come back until 2 weeks. After 2 weeks, it started stalling again. When I'm parking, Rpm drops so low between 200 to 400 and sometimes stalls. When I start it right back up, rpm drops so low so I have to press the gas to make the rpm jump until it can maintain an idle without stalling. I took it to the shop awhile ago and the mechanic said its perfectly fine. He test drove the car and it was so smooth and showed no problem. Everytime I get it into a shop, the car magically runs perfectly fine and smooth showing no signs of problem. On the way home awhile ago, I stalled 5 times while parking again. It's insane. Tomorrow I'm taking it to the mechanic to get the throttle body cleaned again. Hoping the throttle body cleaning tomorrow solves it once and for all.
Mat Ivan Arquero you might have bad throttle body try calibration it but u need scan tool to do that
@@RBTheMechanic my mechanic has one. Should we do the idle relearn? What else should we calibrate with the scan tool? What do you think is the problem?
@@mativanarquero Did you fix it. I don't think that your problem is a throttle body, I believe it to be sensors, I just don't know which one yet. I replaced the Idle Control Valve in mine, and got excited for two weeks and now the problem is back again. I stalled at the stop light, and later It was choking after I filled it up with gas, so I could't start it at alll. It happened already secon time at the gas station.
@@babycakes8434 Yup. Turns out to be just wiring of the sensors near maf. My mechanic just sprayed electronic spray onto the sockets and my car has been running and idling smooth ever since.
@@mativanarquero You stumbled upon a good mechanic. I will buy myself some electronic spray. I need to also buy a voltage meter to be able to check the cables. I am tired of mechanics who don't know much about the diagnostics, or the ones that want to charge me $120 for diagnosing every problem that I get. They don't even want to apply that to a repair, if I fix it with them. Thank you for sharing.
Thank you brother. This helped me alot. 👍🏼
Thanks for this video! I have a 2010 challenger SE and this started happening to my car! I hope this works I have to travel today!!
My butterfly valve doesn’t open when I put weight on it does that mean the car has to be all the way on? It rattles when I turn the car almost all the way on
Oh yeah should make the car better
My 1998 would die at stop lights and stop sighns and did this procedure and did not work, was pretty clean. So next I changed the idle control valve and it helped, not dieing anymore but it just idles up and down when stop somewhere. Can you help me , this is why I subscribed because it looks like you work on alot of Honda's
Can't wait to try this tommorow
I'm definitely not a mechanic so I hope it's as easy as it looks🤞
Thank you so much
I subscribed
Yeah it’s not hard what year make mode is ur car? And this service will make a big difference in idle and help in long term stall issues fix
@@RBTheMechanic
WOAH, I didn't expect you to message me cool,,,, I have a 2010 nissan exterra, i bought it for my daughter new ..now I drive it it's got 253,000 miles but still runs great except for this stalling at stops
@@mrgallagher7072 ok cool just to let u know Nissans act up after throttle cleaning u might have check engine light after u clean it cuz it will breath better RPM with be little higher but it will resettle at few drive cycles
I clean my throttle body yesterday with carb cleaner from Walmart, it ran good for a day then it stalled on a hill and wouldn't start back up, I waited 2 hours for a tow truck to come get me off the road, so now I'm back to square one trying to figure out why my car don't run right 😱 I recently replaced the spark plugs, wires, ignition coil, so now the only thing I can think is maybe a fuel filter, I pray it's not the fuel pump 🙏 I wish I would have taken mechanic school as a kid, mechanic skills are worth as much as gold in my opinion
Did u try pressing the gas peddle and crank the car at same time when it wouldn’t start up?
@@RBTheMechanic
Yes... To me it seemed like it wasn't getting fuel, but I'm not a mechanic in any way, lately I've been learning to do stuff on my own because mechanic shops in my area have a 1 to 2 week waiting list and are way over priced, there are so many things that could be wrong, I just don't know where to start looking
@@TRANSPORTKING1988 ok I think best test would be to spray some starter fluid in to the engine and determin if it starts up that will lead to at least know it’s fuel related That’s what it seems like
@@RBTheMechanic
Do you spray the starting fluid directly into the throttle body? I know it's extremely flammable, so I'll do one squirt at a time... I know in semi trucks we used to spray ether in the Air canister to start them up, I've been watching videos on how to change a fuel filter and that's no easy task either, my vehicle is a Mercury Mountaineer 5.0 engine.... I've owned it for years and never had any problems now all of a sudden I'm getting a boat load of issues
I will be doing this tomorrow.....thank you very much.
carlos martinez let me know how it goes. Please subscribe also subscribe to my other channel here’s link ua-cam.com/channels/vqsPzqAZfVv_gjBYUFqNdg.html
OK, thanks for the tip. I’ll try that.
The throttle body was cleaned by Toyota in March 2020, no problem with idle when I left Dealer. In June 2020 I cleaned the MAF. No problem with idle speed. In Sept 2020 I replaced the battery. No problem with idle speed. I installed new plugs in April 2020 and that increased the idle for less than a day. I think it was in December 2020 that when started cold it would stall if put into reverse without a warmup but rarely.
On another occasion with the engine warm, parked for a few minutes, then when started and put in drive, stalled 3 times in a row. The near stalling at red lights in gear is the most common problem when the engine is warm. Sorry it’s so long. The engine speed drops down to 500 rpm when warm and in gear.
Ok try cleaning throttle I double it dealer did good job and I think it should be better trust me they r screw UPs please try cleaning first
RB ..awesome explanation. Thanks
Welcome!!! Yup it will help lot of people
Thank you Sir, it worked !! No more stalling 😁
Jose C nice job .... you saved whole lot of time and money ... please subscribe also subscribe to my other channel here’s a link ua-cam.com/channels/vqsPzqAZfVv_gjBYUFqNdg.html
Guys replace or clean MAF sensor also...only use MA F sensor cleaner ..don't touch the tip and spray lightly then buy a new one..replaced the throttle body but the tiniest bit of carbon on the MAF will not let the ECM relearn...
Thanks a million, man!
MrSmiley977 no problem please subscribe also subscribe to my other channel here’s a link ua-cam.com/channels/vqsPzqAZfVv_gjBYUFqNdg.html
I like your content bro 👌 keep grinding and putting up videos 💪 people definitely need this
Yup year from now I will become UA-cam alldata mechanic
Great Job, I Think That Was My Problem, Thk You Bro.
gilbert singh no problem message me for anything else I have tons of video on every thing and please subscribe
RB The Mechanic how come not to use brake cleaner
Anthony Udeh good question you can use it but this stuff works great i would recommend it over the brake cleaner
Thanks my friend, how often do we do this procedure?
Big Worm doing this every 15k milages should keep the car running smooth
Thank you for this video..... I subscribed and like video... your video was very helpful..
Thank you!!
Thanks for the video! 👍
No problem 👍
Thank u sir for all the information I appreciated
No problem please subscribe also subscribe to my other channel here’s a link ua-cam.com/channels/vqsPzqAZfVv_gjBYUFqNdg.html
I see the air raid system on this car. I had a K&N system on my 2004 Silverado 5.3 truck and it kept trashing my EGR valve thats located inside the valve cover because of the oil you’re supposed to coat the air filter with. Went back to factory equipment and haven’t had a problem since.
Oh ok I had no issues
Thanks brother!
Welcome!!!
Throttle body look like a ninja turtle
if your car stalls like that check the mass airflow sensor, because if it is aftermarket, chances are it's a piece of you know what and might need to be replaced with an OEM.
That also could be possability
I just had my lifters fixed and I have this problem after. Mechanic said he cleaned the throttle body but still doing ot
Do it urself maybe he didn’t or did lame job
quick questio ... kia rio 2012.. stalling at red lights or when going very slowly. No error codes either. Engine does not do a suffocating sound. It just stops. Do you think it could be the throttle or the injectors?
I subscribed. I have a Chevy trailblazer 06 and my engine is stalling when I come to a light or stop sign. I be so nervous. When I take off again the engine light blinks and it will accelerate slow and then go really fast. I hope after I do this it will solve the problem. Last winter I had to crank it like 8 times because it would turn off as soon as it started before it stayed running smoothly. 😣
Jessica Beck blinking light means it might be misfiring can u have ur scanned Autozone dose it free get me the code but the stall Issue this might fix that get back to me please with codes
Fuel pump os going away
@@tomasnokechtesledger1786 no
Your trailblazer is going into limp mode because your catalytic converters are being flooded with gas. Either your cats are clogged, a coil is bad, you have a massive vacuum leak or your timing is off. Hearing your issue how it goes slow and blinks the lights is 100% the catalytic converter. Change it and thank me later
Battery cables are loose or broken, also can be with corrosion at their attachment to chassis.
Great video and details. ‘13 GMC Acadia here and we followed the same steps along with maf cleaning/ cps replacement and the car still stalls and lights. No cel?
Did u scan for codes
@@RBTheMechanic
Yes no codes, when arriving at a stop if we shift into neutral No stall.
@@teddiazjr.6223 ok so it’s idle stall related what is ur rpm right before ur stalls out idle rpm should be like 700-800RPM
@@RBTheMechanic as your slowing down the idle drops to 800 then stalls out around 10ft before the stop sign
@@teddiazjr.6223 it could be bad throttle I would do another cleaning and try to do relearn with scantool
Thanks
Welcome
Thanks alot for sharing your experience. I got 2011 Toyota sienna the AC is not trun on. But when you conect it with computer the compressor trun on. If you can help me with that.please. thanks
Dose it make cold
When it runs? Check ur fuse and relay if it dose
@@RBTheMechanic hello . Yes it is cold when it runs .thank you
Very good bro i watched your video and im very interested in what you doing. Keep up the good work.
Thank you my friend these videos helped out lot of people especially my ac videos
Cleared the throotle body but the problem is still there , what else could be the problem?
What year make and model and describes the proble specific
@@RBTheMechanic opel astra j 2011 1.4 100hp , when staing put at red light or stop the rpm arent consistent and drop even at 500rpm wgen the nornal ahould be 700 and sometines the car stalls because of the low rpm
@@nickbubuioc it got electrical throttle body I never worked on those not sure if it got throttle with idler sensor or electrical
Good job thank you
That was a super duper awesome video ..thanks man!
Joe Carpenter no problem hope it helped please subscribe also subscribe to my rc channel the name is rcusa201
really good video, helped me a lot. thank you
barry wright thanks glad it helped you ...please subscribe also subscribe to my other channel here’s a link ua-cam.com/channels/vqsPzqAZfVv_gjBYUFqNdg.html
Thanks for the demonstration, my 2016 Hyundai Tucson is turning off when I idle at a red light, I can turn the car back on right away and drive, do you think this will solve that problem?
It’s most common problem try this
I have the same problem with my 2017 Elantra. I took it to my mechanic and he cleaned this part but it still giving me a problem. I am so frustrated right now. Please help.
@@nomthandazonkomo2121 my car was fixed… it turned out to be a faulty crank sensor …
@@nomthandazonkomo2121 next time u get a stall try using ur gas peddle to keep it alive to confirm the problem is throttle if it stays alive then u can do throttle idle relearn if it’s been cleaned already
My 2010 f 150 had near stalling problem when I'd come to stop. Cleaned this and air mass flow sensor. Now runs smooth
Nice job!!!! That’s exactly what the problem was good fix!!!
Having same issue , mechanic first told me it was cam shaft synchronizer fixed that happened again. Then he said the IAC solenoid was seized .. fixed that and stalled again smh, happens when I come to a stop.
@@jDot2414 IAC is on older model cars what year make mode u have
@@jDot2414 ..also had to replace fuel pump fuse little after too. Truck wouldn't start one time. Checked fuse it was burnt out., so check that too!
@@RBTheMechanic ..it helped but I also think fuel pump fuse was going out too. Had to replace that about month or two later.
It is better to remove the Throttle Body for proper cleaning (4 screws on my car, buy a Throttle Body gasket before, mine was good, but I still replaced it), since there are 2 sensors on it: Idle Air Control Valve and Throttle Position Sensor (both on 2 screws). I don't know if they are there in that particular location on every car, but on my (2001 Saturn SL2) they are there. Clean or better replace them, they get clogged w/carbon. Clean screws, put a small drop of Orange Threadlocker on each, and very little Dielectric Grease on O-ring of IAC Valve, and on all electrical connectors a bit as you normally do. It will be better update for your car. The film is good, thank you, but those 2 sensors are clogged as well as the surrounding walls on the Thr. Body.
Yeah u can do that but on some cars u will loose the memory and also when u open up the throttle plate manually u can damage it then u will need new throttle
@@RBTheMechanic Thank you for your replay and useful information about possible memory loss. This is a very appealing procedure, since everything is sparkling clean after it. I did it on my car, everything works well. The connection between the battery and computer (Powertrain Module in Saturn Sl2) is not good, but they told me at dealer (I need to get State Inspection done) it was bcs I disconnected the battery, so I need to drive more. I saw a film: the author replaced the Thr. Body as well (on Saturn), no complains about memory loss. Hopefully it won't happen on this car, but, again, very interesting fact to know, thank you.
@@olenaerhardt7725 yeah well as long as job is well done Toyota is big problem with memory loss honda rpm goes high but relearn procedure works
Good video Sir thanks
Welcome!!
awesome , thanks
Nice explanation, gud luck sir
Gerry Guarte thanks please subscribe
Thank u for the video. What do you do to get rid of the airbag light that came on when I drove over a speed bump? the car 2014 Honda CR-V LX.
You have to scan the air bag module to see what codes you got
Is it the same situation like a Honda Accord ? I used to notice that after pumping gas but that could be kuz they mixing water with the gasoline idk
On my 2004 Corrolla I tried to clean the TB by opening the valve by hand and now it's trying to stall at intersections. What can I do. Saw your vid after the fact. TIA.
We’ll try idle relearn usully I don’t recommend hand force
Hopefully this helps my issue. I have a 2018 Honda Odyssey EX-L that randomly stalls at lights. Rpm’s go up but it acts like it’s in neutral. Have to put it in park and drive again to get it going.
Yup give it a shot it’s a great service regardless if it fixes ur issue or not
hey your car is fine its the honda feature that stalls it not to waste gas
@@Exotic_Blue the model I have doesn't have Auto-Idle.
Thank for the video sir question I owned a 2011 Chevy Tahoe 5.3 that stalls and turns off when I'm at a red light or in a drive true I already checked for CODES but there's non because the check ingen light is not on will this help I already replaced all the spark plugs and spark plug wires and also replaced the battery terminal. Will this help help me solve my proble? Thanks for your time
Yup it will most likely fix the issue even if it dosent it will make the idle better. But most likely this is very common issue
Will try doing this tomorrow thank you sir
Quick question unrelated to this topic I have a bad battery sensor and it blew will I need to replace my battery after I replace the sensor
The sensor is on the negative battery terminal
I don’t think so. Change ur battery only if ur having issues with power from battery and if battery is older then 3 years replace it. However idk what is the cause of the sensor to blow. It was it fuses on battery
@@RBTheMechanic I just got my alternator and my battery changed and the check charging system light came on and I checked the piece you took out and it looked like it was burnt out so I ordered a new piece
Should I still replace my battery after changing the sensor too?
@@jayladin9962 I had cars that had burned fuses on battery which is like sensor and it caused this issues so replace it and then see the outcome if u already changed the battery then ur good with that
Well explained, thanks for the video,I subscribed
Thank you! Always here to help with anything just send me message and tell me the issue will reply back same day
2013 Hyundai Sonata SE. Car stalls at stop signs or red lights. runs fine while driving at in town/highway speeds no check engine light and starts right back up after stalling. Only happens after filling gas tank for the first maybe 50 to 100km then runs fine after that. If I don't fill tank all the way there is no problems. any idea of what might cause this? Thanks!!
This service u see if my video is most likely the issue ur having do this first and see how it performs!!!
Dammm Chris Fix said to remove it, wouldve been nice to see u just gota put a brick on gas pedal nd clean it like u did.
Yeah u don’t want to remove it if extras u would disturb things idle speed memory aNd sum of us at home can’t do all that so it’s better to avoid that
My van is having these problems... I replaced the throttle body and still have the issue.
Did u do idle relearning
I get this idling behavior (and sometimes stall) as well but when I restart the car the problem is gone. My throttle body looks super clean. There is a screw missing on one of the connections (post filter I think). Could that loose connection interrupt the air flow and cause the issue? Intermittently?
Prolly not the issue any codes?
Good job men
Yup happy new year!!
I subbed. Thank you
Hi Great Videos RB! I Have a Merceds A190 1999 semi auto. It tries to die when i come to a stop unless i manage to accelerate again quick enough. I f not it just stalls but as soon as i start the car again it's fine until i have to stop again. Would this be worth a try please? Thank you.
MAXINE STROUD yeah it’s would be worth the try see if it got idler sensor clean that also
@@RBTheMechanic ok thank you for replying we'll try that tomorrow :)
MAXINE STROUD ok let me know how it went and please subscribe also subscribe to my other channel the name is rcusa201
Bro you are the best you are one of the only guys I come to when I want to do work on my 9th gen I’m going to tell my honda group about your page. Oh you think you can leave a link to the stuff you use
Thanks bro u can always msg me when u need somthing for information or opinion
@StainSquad what kinda car u got explain to me more in detail what’s going on and try to keep it alive by slightly pressing gas peddle at stop and if that keep it alive it might need this service
My dodge journey always stop in traffic lights or signs stop. What's the problem?
Scan for the codes to see if there’s any codes. Other wise this throttle cleaning may help but to conform see what ur rpm is should be above 700 close to 800 if it’s low then clean the throttle also next time when it’s ready and about to stall try to use gas peddle slightly to see if it stay alive that’s also indication it chocking due to dirty throttle
I have a 2001 ford focus. Have been having stalling/rough idle issues for a few years. First mechanic "replaced a vaccum hose" and it seemed to fix it for 6 months. Second mechanic had car for 4 days and couldn't figure out but replaced fuel injector which somewhat fixed the issue for another 6 months. Mass air flow sensor was also replaced. The issue is back. Im going to try this but any ideas? Thanks!
Did u clean out the throttle and that ford has IAC idle air control motor located on throttle area either that is bad or it’s working on and off they do and will ac stupid here and there replace that would be a good start
@@RBTheMechanic I will try this, thanks for the reply!
I'm going to try this tomorrow to my old girl 87 Chevrolet Camaro IROC z, because my carlikes to shut off at stop signs and red lights like, I want the car stopped but that that much LOL. also random fact, this car made me drop a dress size because every time I go through the drive-thru it would stall and shut down on me so I gave up getting fast food for like two months because of this but then the car ran okay, you just had a hope that nobody will be waiting for you to start your car LOL. I will count to about 1:15 and then I would restart the car to be fine.
Brie Thomass yeah clean it I think your car may have idler sensor that can be cleaned
@@RBTheMechanic Hi, thanks for the helpful tip! Question though, is that in the Throttle area or elsewhere? I'm more of a body work person, so this is alot to learn. Plus i'm tired of having strangers f up my car.
Brie Thomass yup that’s throttle body
Great video man .. would this make my car run rich, them die when put in gear?
I wish you would have shown what issues this car was having before you cleaned it and then an after video.
Not rich but it might be low idle what car u have
@@RBTheMechanic 2014 Chevy SS it just started doing this the other day. I don't know if the converter stayed locked or if it the throttle body. It has a built LS3 with a 3600 stall. Been running fine for a while.
@@isidrosevier1125 try to put it in neural it can be converter locked that can drop it dead
@@RBTheMechanic what do you mean by drop it dead?
@@isidrosevier1125 like completly drop rpm
The throttle body didn't move on my magnum 2.7
I did like you did with a stick
Used the electric seat to push stick on gas pedal
Which sensor older model cars have IAC
Do you think this would be the problem for a 96 4runner ? After driving it on the highway when I come to stops at red lights it starts to shake a lot more and then turns off
Could be this but it’s bit diffrent it had isa not throttle like this is electric so clean throttle and iac
Hey man I have a 2015 camaro ss. I cleaned just like this video at first it felt smooth like it used to be but it start lagging again. Anything else I can do to fix the problem?
By lagging what do u mean? Can u make a small clip of video and post it so I can see what it’s doing
@@RBTheMechanic like I when I put the car in drive or when I am at a stop light I press the gas and it takes a second or two to go or I’ll press the gas then it’ll jump like hesitates
Good job bro.
Thanks
After changing transmision on 2010 Toyota Camry, the car started stalling in a stop sign. i will do exactly what i saw on the video to see if the problem will be solved.
It should cuz I know they took out baattery
@@RBTheMechanic yes, they did
When im dropping gear into 2nd to make a turn my car nearly cuts out i have to put it in nutral to stop it cutting out when the car is stopped it idles fine doesnt stop onky when im coming to a stop to turn could this be the issue ???
It’s manual transmission?
What will happen if your throttle body stop opening and closed?
Liked. Hey man thanks. I was trying to figure out way my car wasnt starting, fuel pump, relay and other reason. I took off my throttle hose to spray starter into it to see if I had spark. It was left off for a while until I figured out what it was. It was the Fule pump relay. The car started up fine . But now, shuts off when I take it put of park or I try to drive. I can get it to drive but I have to baby the peddle and once she going shes fine until I come to a stop, or try to take off from one. Would it be stalling for this reason above. Would leaving the hose off of the throtle body make it not want to run. Prior to my relay goin out , It ran great.
Seems like if you clean the throttle it will fix the issue give it a shot. Let me know how it went. Good job with the relay find
I removed mine and cleaned it before watching this video but I always disconnect my battery and let reset anytime I take anything off. So it's working out so far
Oh ok cool good job this is good service
@@RBTheMechanic yes sir, good video though you got a good way of explaining stuff..new subscriber 💯
@@robertespinoza9104 thank u
(2012 Toyota Camry) Car sounds like it’s a diesel for a few seconds when I start to accelerate. Shut off on me twice when I was on idle. Could this be the same issue or should I be trouble shooting else where? Thanks in advance for your response.
Well this can be the issue with stall most likely u need to do this to see the out come and the sound u might want to check ur oil if it’s due for oil change change that other than that not sure what the sound it might have to make a small video and post it
does this apply with car using a IAC solemoid?
I’m sorry solemoid? Solenoid? But think this so answer is yes
Yea ya gotta do this to my 2006 charger keeps dying out when im Idling in drive
Yup do this service
Giant stick, rest it on the gas pedal for one end. And the other end recline the seat forward to keep it in place.
I do that now also check brake lights like that