Dude you are awesome. I just rebuild a original recently. Do the Rattler! Be cool to make the landing gear deploy separate from the wings spreading. Also love the TMNT arcade behind you.
@@victory7763 looks like 4" at best not 6" scale Have you ever seen a 1/12 Hasbro Tie Fighter? Just because you may be able to house a classified figure in the cockpit doesn't mean the rest of the jet is scaled appropriately.
It seems like it is actually the correct size to be a scale f14 for 3.75 inch figures. 1 meter would be a 1:18 scale jet, It would be cool to have a modified cockpit for the smaller toys
That's amazing. Would also be cool to see a slightly shrunk-down single seater version for people who want something big but not quite 1:1 upscale big.
There is a few other Planes they did that were single seat the X-30 Conquest comes up a lot for example. Heck even the Mudfighter. Not to mention all the helicopters too.
I'm wondering if you ever try doing a verictech/valkrie from robotech/macross series...I have the toynami robotech 3.75 figures and would love a transforming valkrie/verictech for the 3.75 figures...they would fit a skystriker but to have an actual transforming valkrie/verictech for 3 inch figures would be sooooo 😎 cool.
While i was looking at some toy review, as soon as I realized that i remembered i used to have a toy plane when i was small and i recognized a plane that could fold but i didn't know what it was. I knew i had one but couldn't put my finger on it🤔 i'm gonna save this to my playlist of "childhood toys"
I've built the Sky Stryker out of cardboard,too. I have a great question,how do you measure the 'dumbell' missle holders,also are you going to build the U.S.S. Flagg,and the space shuttle Defiant in classified scale?
Soo, the file is $150.00? And the actual production model is $1,000 + shipping? And that's just 3d printed. And people wonder why Hasbro doesn't sell this on retail or haslab it. $1,000 for something you can make in your shed or garage or where ever. The file at $150.00 is a good buy. If I had a printer I'd do that.
If he sands and cleans the printer lines on each piece and then paints them before assembly, that is a lot of labor, so I would understand why he is asking a grand for this.
Making dreams print true! Nice work, man!
Dude you are awesome. I just rebuild a original recently. Do the Rattler! Be cool to make the landing gear deploy separate from the wings spreading. Also love the TMNT arcade behind you.
You're hired. Report to Hasbro right away to begin production. ;)
There you go, great idea
dude you're high af, this is NOT classified scale
Probably be better quality than this haslab piece of garbage I'm stuck with
@timsgta yes it is, but it would be extremely expensive
@@victory7763 looks like 4" at best not 6" scale
Have you ever seen a 1/12 Hasbro Tie Fighter?
Just because you may be able to house a classified figure in the cockpit doesn't mean the rest of the jet is scaled appropriately.
WOW! I just checked out your site. Will be giving you my hard earned money next year that is for sure!
Sweet love to see a macross robotech version which transforms...that be sweet.
It seems like it is actually the correct size to be a scale f14 for 3.75 inch figures. 1 meter would be a 1:18 scale jet, It would be cool to have a modified cockpit for the smaller toys
Clearly you're going to have to make a USS Flagg next. :D
beautiful absolutely beautiful i would loveto get this for my husband
Send me a message on Instagram s3d_toys
Omg amazing
Thats illl!
Can’t wait for your 3d printer uss flagg!
Looks awesome! That would be great to have on display!!
Awesome! Great build.
That's amazing. Would also be cool to see a slightly shrunk-down single seater version for people who want something big but not quite 1:1 upscale big.
There is a few other Planes they did that were single seat the X-30 Conquest comes up a lot for example.
Heck even the Mudfighter. Not to mention all the helicopters too.
I'm wondering if you ever try doing a verictech/valkrie from robotech/macross series...I have the toynami robotech 3.75 figures and would love a transforming valkrie/verictech for the 3.75 figures...they would fit a skystriker but to have an actual transforming valkrie/verictech for 3 inch figures would be sooooo 😎 cool.
I second that I would love to get a robotech vertech
The Conquest X-30 would be a more realistic Haslab release
Very impressive
Holy WOW its freaking amazing
Amazing work.
While i was looking at some toy review, as soon as I realized that i remembered i used to have a toy plane when i was small and i recognized a plane that could fold but i didn't know what it was. I knew i had one but couldn't put my finger on it🤔 i'm gonna save this to my playlist of "childhood toys"
Awesome job brother!
Thanks!
One word, WOW!!
So nice!!
Great job
put radio control in it and fly that shit!
Amazing!
How 'swooshable' is it though ;) Subscribed as I can't wait to see how the project progresses!
I've built the Sky Stryker out of cardboard,too. I have a great question,how do you measure the 'dumbell' missle holders,also are you going to build the U.S.S. Flagg,and the space shuttle Defiant in classified scale?
That is sick
Wow it’s a Masterpiece you are the Best wow amazing
Can wait until gi joe starts there life size scale
Nice
Amazing!!!!!
What is the biggest size skystriker that you able to 3D print? And how much would it cost me for you to print, and build?
That's badass
This is awesome! Please consider making a Defiant!! 🙂
😂
How much is all I need to know???
its up on my website www.s3dtoys.com
@@s3d_toys thanks heading there now
You my friend are a genies
I feel like it could be smaller and still work. Leave the cock pot alone and scale dampen the rest
You know she's big but she isn't quite as huge as I expected her to be.
Is that a gasoline powered radio controlled version of the G. I. Joe Skystriker?
no sorry :( 3d printed. checkout www.s3dtoys.com
Good for you to hell with Hasbro
Theres no room to have a squadron of air fighters in that size. To me dats y 3.75 is perfect
That's why this model isn't for you 😉
bad too the bone what would somethg like that cost
Soo, the file is $150.00? And the actual production model is $1,000 + shipping? And that's just 3d printed. And people wonder why Hasbro doesn't sell this on retail or haslab it. $1,000 for something you can make in your shed or garage or where ever. The file at $150.00 is a good buy. If I had a printer I'd do that.
If he sands and cleans the printer lines on each piece and then paints them before assembly, that is a lot of labor, so I would understand why he is asking a grand for this.