That has so many great features, I'm about sold on it! Especially since I checked your link for and found there is a lavender one that for some reason is $5 cheaper!
There are 3 total. Type All in One in the search bar of my channel and you’ll see all 3. Thanks for watching. I need to do another review of this board. It’s been slightly over 2 years and I’m still using it all the time for cutting and scoring. Very convenient.
I just came across this video, anyone know if there is a replacement corner punch? Mine will not stay down, I think a tab or Sony might be missing to lock it into place on the board but not sure.
Hi. I am sorry to say that I don’t think so. I recommend contacting them to ask. You never know, maybe they’ll replace your cutter or give you a coupon for their products to make good. They have a phone: 801-226-0747. Email is customerservice@wermemorykeepers.com
No. You can make banners but not flowers or boxes. Boxes can be made in basic shapes using any cutter and scoring tool so the “tools” are in it but there’s no directions included for boxes. Hope that makes sense.
I know you said you will be testing and showing further review, I haven’t gotten into stamping (yet) so I’m might not be a good question. The stamping platform with the magnets at top and springy feet on bottom will the stamped impression be even or does it have higher/lower spot compared to feet and magnets ? I hope that I asked this correctly
Your question is a good one. The way the platform is shaped, when the platform is pushed down it is flush with the board below. In theory it should put even pressure on the stamp. Your question helps me know what to cover when I do that demo. Thanks so much for your question. I love communicating with my subscribers 😊
taistorezan I think you might. I’m planning a video to look at what else you can do with this after I get through the 10 tasks that they advertise. It’ll take a little playing around with it to figure it out first. 👍
Thank you @sugarshinedesigns, it will definitely help me decide on my future purchase. I still haven't decided whether I'll get this or every board separately like the stamp platform, paper cutter, etc
That's interesting. Maybe they improved on it because it actually works pretty well. However, I still use my Misti more often out of habbit. If I am already using the Works for scoring or cutting and it's out, I'm more likely to use it but if I have to pull out a new tool for stamping, I pretty much go for my Misit because it's smaller to work with and takes less room on my work table. Thanks for sharing your experience with their mini stamping tool! Janet
Thanks for the review of this new tool...I can see the benefits of it for a beginner or as a traveling tool...I have all these tools so it will not be something for me...as for the scoring the 9 inch score mark you can just turn your paper and score on the 3 inch again...easy enough.
Yes. Good points all. I did think of the paper flip for the 9” mark but decided not to say that because which side of the score has the mountain or valley sometimes makes a big difference in the cracking of the cardstock when folding it. Thanks so much for commenting. I really appreciate getting feedback. 😊🎉
The viewers who suggested how to score between the 6 inch and 12 inch area of the paper are correct. Don’t confuse “rotating” your paper with “flipping it over” front to back. Rotating will result in keeping the same side of the paper face up and all your score lines will be consistent. Flipping it would make reverse side face up and then you would have some peaks and some score lines would be valleys.
Very interesting. I’d love to be able to have all this in one. I feel like Once you get the hang of it it would be so nice. It’s not like we would be using all the features at once.
I agree. You would use 3-4 features regularly - or at least I would if it works well. The rest are cake. I’ll have a vid out soon to show how it works and if I like it. Thanks for commenting. ❤️
Hi there! Unfortunately, there’s no information out there about availability in brick and mortar stores. If it proves popular, I’m sure big box stores will stock them. I’ve noticed that new WRMK products do tend to show up 1-3 months after being released online. I’ve been checking at the 3 stores in my area but there’s none yet. Hopefully they will because coupons will make this even more affordable. 😊
My only question, at this time, is the availability of blade replacements. I received my "Works" today and I'm loving it but my online search for replacement blades has been fruitless. Can anyone tell me where to find them?
Thanks for your response BUT how could they make AND DISTRIBUTE a product costing this much without also making replacement blades available at the same time? Had I known I would have waited to purchase this product!!
@@beverleymacaluso7974 I understand the frustration. I don't think it'll be long. These are proving popular and they've always supported their products so I feel they'll get them out there very soon. It'll be annoying for sure if we can't get them before our first blades go dull though.
Hello! I did think of your suggestion for the 9” mark but decided not to say that because which side of the score has the mountain or valley sometimes makes a big difference in the cracking of the cardstock when folding it. Thanks so much for commenting. I really appreciate getting feedback. 😊🎉 I hope you’ll stay tuned for the demos. I will be mentioning the paper flip idea then.
No problem with it but I prefer my envelope punch board. It has more range in size and is more straight forward. If you’re not used to an envelope punch board, this will work fine for you.
@@SugarShineDesigns The reason I referred to the All In One Envelope feature is that, among other things, making a 3"x5" envelope does not work. The Gyude info is incorrect, at least the way some of us have found out after repeated tests. All demos seem to avoid that size.
Thank you. I didn’t want to show it that way because sometimes what side you score on makes a difference for cracking ( i.e. coated papers). I felt it was too much detail for the unboxing but the funny thing is a bunch of people have called this to my attention. There’s a lot of smart experienced crafters participating on my channel. Love it! ❤️ I will get into that detail when I demo the score board in the next video. I hope it’ll be out by the end of this week.
@@SugarShineDesigns when you mean "SIDE" are you thinking we mean to flip the paper over? If you rotate 180 degrees you on the same side.....wouldnt the hills valleys and cracking then be on the same side?
FYI when you're trying to score over 6 in all you have to do is rotate the paper 180 degrees. Well this is a great review might have been a good idea to read instructions first
Read directions? Ha, ha, ha! I probably should have but this gave a good idea of what itś like out of the box with just a quick skim of the directions. I have done other videos with complete directions for many of the features of the tool. I love it! Thank you! Janet
I have yet to find a cutter that checks all the boxes. This one checks a lot of them though. I use it and a Cutterpillar Pro. I use the scoring tool, cutter, and bow maker pretty much every week as I’m a daily crafter. Sorry you haven’t liked it but maybe give it another try. You might like it better the 2nd time around. ❤️
I will not be purchasing this. It would not serve a purpose for me. I do however appreciate you showing the bad and good. All of your concerns are valid ones. I guess I’m just familiar with my products I use and this product looks really fussy to use. By the time I figure out how to position or set my paper to make what I need I could have done it quicker with the products I already use.
Yes that’s possible. I’m hoping with a couple uses, it will become second nature. I’m not going to really ever make pom poms or tassels but I like the idea of having the trimmer, stamp press, score board and envelope maker all together. I use all those things a lot and right now they are all separate tools taking up space and in places that require me sometimes to stop and go get them. I hope you’ll watch the demos and see what you think. I’m definitely going to be honest in my assessment of each feature as well. Thanks so much for commenting. I love the feedback 😊
Just wondering, Janet, have you figured out how to create a rectangular envelope with the All-in-One? The instructions show one, but all of the envelopes will be square. This has been a big disappointment for me.
Definitely and I never said that. Sometimes I want to slap my forehead and say, what we’re you thinking?! Thanks so much for your comment. I appreciate feedback very much!😊
Thank you for the walk thru of this product. I know I will not be purchasing it. Too much fudging around to accomplish what you need to do. I think it would be exasperating.
Thanks for commenting! Yes, it may be exasperating but I can’t really say that until I actually use it a bit. It could be that it will be until I learn how to do everything but if it works well, I will like not having to switch from tool to tool like I do now. I am not that excited about Pom poms and tassels but the rest is intriguing to me. I hope you’ll stop by when I demonstrate the different features. Then you can tell for sure if this would make you crazy or not. 😊
Thanks Lillian. I agree with you that many of their tools are gimmicky but I’ve been using this one for months and find it very handy for card making and quick stamping. The blade dulls quickly but the blades are inexpensive and easy to get at big box stores. Otherwise, I have no complaints. Not everything is for everyone though. Thank goodness there’s lots of choices out there! 👍🏻
Like I'd mentioned in another post, I wish there was a way to create rectangular envelopes with this tool. I know how to create one without a tool at all, but you'd think that this tool could be utilized for that purpose without making a square envelope for a rectangular card. Just like you had to get creative in making a bow because this tool doesn't help, we also need to get creative in making envelopes too!
I chose your video. Become I’ve just watch a demo video by memory keeper. Your comments have been fairly negative. You could make a simple bag to hold it it to keep all together.
I’m not sure what you are saying. Auto correct probably changed some of the words but I think it’s something about all the pieces. I think it’s well designed for keeping all the pieces together except for the stamp press. It has nowhere to be stored on board and I wish it did. Otherwise it’s a nicely designed tool and I’m using it as my primary cutter since I got it. I should probably do a follow up to talk about my use of it and how much I like it now that I’ve had it a while.
That has so many great features, I'm about sold on it! Especially since I checked your link for and found there is a lavender one that for some reason is $5 cheaper!
@@LisaVornhagen Excellent! I bet the lavender one is pretty. 🤩
This is the only video I can find that you made on this product was hoping to learn more
There are 3 total. Type All in One in the search bar of my channel and you’ll see all 3. Thanks for watching. I need to do another review of this board. It’s been slightly over 2 years and I’m still using it all the time for cutting and scoring. Very convenient.
. Thx for your informative video. I believe the instructions say to put another piece of paper under card stock before stamping
I’ve found that it’s fine without anything. I’ve used it quite a bit since this video. Thanks for watching and commenting.😊 I appreciate it!
I just came across this video, anyone know if there is a replacement corner punch? Mine will not stay down, I think a tab or Sony might be missing to lock it into place on the board but not sure.
Hi. I am sorry to say that I don’t think so. I recommend contacting them to ask. You never know, maybe they’ll replace your cutter or give you a coupon for their products to make good. They have a phone: 801-226-0747. Email is customerservice@wermemorykeepers.com
I have the banner maker 3 In 1 maker the box maker and the flower maker does it take the place of all of those
No. You can make banners but not flowers or boxes. Boxes can be made in basic shapes using any cutter and scoring tool so the “tools” are in it but there’s no directions included for boxes. Hope that makes sense.
I know you said you will be testing and showing further review, I haven’t gotten into stamping (yet) so I’m might not be a good question. The stamping platform with the magnets at top and springy feet on bottom will the stamped impression be even or does it have higher/lower spot compared to feet and magnets ? I hope that I asked this correctly
Your question is a good one. The way the platform is shaped, when the platform is pushed down it is flush with the board below. In theory it should put even pressure on the stamp. Your question helps me know what to cover when I do that demo. Thanks so much for your question. I love communicating with my subscribers 😊
Thank you, hope the score lines are not an issue that you already told us about.
I hope it isn’t a problem either. It’s such a cool concept.
Hey, thanks for the review.......do you think it would be possible to make paper bows and gift boxes like the 123 ounch board?
taistorezan I think you might. I’m planning a video to look at what else you can do with this after I get through the 10 tasks that they advertise. It’ll take a little playing around with it to figure it out first. 👍
Thank you @sugarshinedesigns, it will definitely help me decide on my future purchase. I still haven't decided whether I'll get this or every board separately like the stamp platform, paper cutter, etc
thank you for this video.
I have their mini stamping tool, which does not work well with clear stamps and still go back to using the Misti instead.
That's interesting. Maybe they improved on it because it actually works pretty well. However, I still use my Misti more often out of habbit. If I am already using the Works for scoring or cutting and it's out, I'm more likely to use it but if I have to pull out a new tool for stamping, I pretty much go for my Misit because it's smaller to work with and takes less room on my work table. Thanks for sharing your experience with their mini stamping tool! Janet
Thanks for the review of this new tool...I can see the benefits of it for a beginner or as a traveling tool...I have all these tools so it will not be something for me...as for the scoring the 9 inch score mark you can just turn your paper and score on the 3 inch again...easy enough.
Yes. Good points all. I did think of the paper flip for the 9” mark but decided not to say that because which side of the score has the mountain or valley sometimes makes a big difference in the cracking of the cardstock when folding it. Thanks so much for commenting. I really appreciate getting feedback. 😊🎉
The viewers who suggested how to score between the 6 inch and 12 inch area of the paper are correct. Don’t confuse “rotating” your paper with “flipping it over” front to back. Rotating will result in keeping the same side of the paper face up and all your score lines will be consistent. Flipping it would make reverse side face up and then you would have some peaks and some score lines would be valleys.
Very interesting. I’d love to be able to have all this in one. I feel like Once you get the hang of it it would be so nice. It’s not like we would be using all the features at once.
I agree. You would use 3-4 features regularly - or at least I would if it works well. The rest are cake. I’ll have a vid out soon to show how it works and if I like it. Thanks for commenting. ❤️
Will this be available at Hobby Lobby soon?
Hi there! Unfortunately, there’s no information out there about availability in brick and mortar stores. If it proves popular, I’m sure big box stores will stock them. I’ve noticed that new WRMK products do tend to show up 1-3 months after being released online. I’ve been checking at the 3 stores in my area but there’s none yet. Hopefully they will because coupons will make this even more affordable. 😊
My only question, at this time, is the availability of blade replacements. I received my "Works" today and I'm loving it but my online search for replacement blades has been fruitless. Can anyone tell me where to find them?
Beverley Macaluso They aren’t available yet but the company has promised replacement blades in the near future. Hope you enjoy yours!
Thanks for your response BUT how could they make AND DISTRIBUTE a product costing this much without also making replacement blades available at the same time? Had I known I would have waited to purchase this product!!
@@beverleymacaluso7974 I understand the frustration. I don't think it'll be long. These are proving popular and they've always supported their products so I feel they'll get them out there very soon. It'll be annoying for sure if we can't get them before our first blades go dull though.
To score @ 9", simply flip the paper around and score at 3" again.
Hello! I did think of your suggestion for the 9” mark but decided not to say that because which side of the score has the mountain or valley sometimes makes a big difference in the cracking of the cardstock when folding it. Thanks so much for commenting. I really appreciate getting feedback. 😊🎉 I hope you’ll stay tuned for the demos. I will be mentioning the paper flip idea then.
Is there a problem with the 'envelope' part. You seem to be avoiding it.
No problem with it but I prefer my envelope punch board. It has more range in size and is more straight forward. If you’re not used to an envelope punch board, this will work fine for you.
@@SugarShineDesigns The reason I referred to the All In One Envelope feature is that, among other things, making a 3"x5" envelope does not work. The Gyude info is incorrect, at least the way some of us have found out after repeated tests. All demos seem to avoid that size.
Good to know. I don’t use 3x5 envelopes so I wasn’t aware of it. Good info. TFS.
If you are scoring on 12" by 12" paper to score the 6" to 12" section of paper rotate your paper 180 degrees.
Thank you. I didn’t want to show it that way because sometimes what side you score on makes a difference for cracking ( i.e. coated papers). I felt it was too much detail for the unboxing but the funny thing is a bunch of people have called this to my attention. There’s a lot of smart experienced crafters participating on my channel. Love it! ❤️ I will get into that detail when I demo the score board in the next video. I hope it’ll be out by the end of this week.
@@SugarShineDesigns when you mean "SIDE" are you thinking we mean to flip the paper over? If you rotate 180 degrees you on the same side.....wouldnt the hills valleys and cracking then be on the same side?
You are correct. Rotating would make it on the same side. That would work.
FYI when you're trying to score over 6 in all you have to do is rotate the paper 180 degrees. Well this is a great review might have been a good idea to read instructions first
Read directions? Ha, ha, ha! I probably should have but this gave a good idea of what itś like out of the box with just a quick skim of the directions. I have done other videos with complete directions for many of the features of the tool. I love it! Thank you! Janet
@@SugarShineDesigns where can I find the other videos you've done on this I check on your name but can't find them?
I have this tool and not a fan good idea though ❤
I have yet to find a cutter that checks all the boxes. This one checks a lot of them though. I use it and a Cutterpillar Pro. I use the scoring tool, cutter, and bow maker pretty much every week as I’m a daily crafter. Sorry you haven’t liked it but maybe give it another try. You might like it better the 2nd time around. ❤️
I will not be purchasing this. It would not serve a purpose for me. I do however appreciate you showing the bad and good. All of your concerns are valid ones. I guess I’m just familiar with my products I use and this product looks really fussy to use. By the time I figure out how to position or set my paper to make what I need I could have done it quicker with the products I already use.
Yes that’s possible. I’m hoping with a couple uses, it will become second nature. I’m not going to really ever make pom poms or tassels but I like the idea of having the trimmer, stamp press, score board and envelope maker all together. I use all those things a lot and right now they are all separate tools taking up space and in places that require me sometimes to stop and go get them. I hope you’ll watch the demos and see what you think. I’m definitely going to be honest in my assessment of each feature as well. Thanks so much for commenting. I love the feedback 😊
Just wondering, Janet, have you figured out how to create a rectangular envelope with the All-in-One? The instructions show one, but all of the envelopes will be square. This has been a big disappointment for me.
Thanks for the review BUT it would not be my cup of tea...I think it would be nice for beginners and have everything on one board.
Definitely and I never said that. Sometimes I want to slap my forehead and say, what we’re you thinking?! Thanks so much for your comment. I appreciate feedback very much!😊
Thank you for the walk thru of this product. I know I will not be purchasing it. Too much fudging around to accomplish what you need to do. I think it would be exasperating.
Thanks for commenting! Yes, it may be exasperating but I can’t really say that until I actually use it a bit. It could be that it will be until I learn how to do everything but if it works well, I will like not having to switch from tool to tool like I do now. I am not that excited about Pom poms and tassels but the rest is intriguing to me. I hope you’ll stop by when I demonstrate the different features. Then you can tell for sure if this would make you crazy or not. 😊
@@SugarShineDesigns Looking forward to you working with the new tool.
I think this looks like a terrible tool. My past experience with their products have not been good at all either.
Thanks Lillian. I agree with you that many of their tools are gimmicky but I’ve been using this one for months and find it very handy for card making and quick stamping. The blade dulls quickly but the blades are inexpensive and easy to get at big box stores. Otherwise, I have no complaints. Not everything is for everyone though. Thank goodness there’s lots of choices out there! 👍🏻
Like I'd mentioned in another post, I wish there was a way to create rectangular envelopes with this tool. I know how to create one without a tool at all, but you'd think that this tool could be utilized for that purpose without making a square envelope for a rectangular card. Just like you had to get creative in making a bow because this tool doesn't help, we also need to get creative in making envelopes too!
I chose your video. Become I’ve just watch a demo video by memory keeper. Your comments have been fairly negative. You could make a simple bag to hold it it to keep all together.
I’m not sure what you are saying. Auto correct probably changed some of the words but I think it’s something about all the pieces. I think it’s well designed for keeping all the pieces together except for the stamp press. It has nowhere to be stored on board and I wish it did. Otherwise it’s a nicely designed tool and I’m using it as my primary cutter since I got it. I should probably do a follow up to talk about my use of it and how much I like it now that I’ve had it a while.