Tested - Filament Friday E-Leveler Tool - Bed Leveling finally easy for everyone?
Вставка
- Опубліковано 28 чер 2024
- Get the Filament Friday E-Leveler Tool on Amazon: geni.us/eleveler
THE PRINTERS I USE: kit.co/danielcrosslink/the-3d...
MY MERCH: crosslink.io/shop
BECOME A PATRON: / crosslink
CHAT ON DISCORD: / discord
BUSINESS INQUIRIES ONLY (OR IF YOU WANT TO SEND SOMETHING) - DANIEL@CROSSLINK.IO
FOLLOW ME:
INSTAGRAM - / danielcrosslink
TWITTER - / danielcrosslink
FACEBOOK - / danielcrosslink
WEBSITE: crosslink.io
The Music I use: crosslink.io/es, AMAZING for UA-camrs!
GEAR USED
kit.co/danielcrosslink/my-vid...
Disclaimer: As an Amazon Associate I earn from qualifying purchases. - Наука та технологія
Glad you were able to try it out and great explanation of why it’s helpful even for autolevel machines.
Why it's not available in Germany?
Is their a way to get it?
Yes please add some to a European shipping warehouse!
We probably should find a way to ship it from EU, I agree. How complicated is this with Amazon?
@@Crosslink3D just try talk to chep maybe their is a much more easier way than amazon...and the best he earns more when he sells it wirhout Amazon.
If their is found any solution to order this usefull device to Germany please let us know!!
Does it work with Ender 3 pro?
My bed is pretty dialed in. What I don't get is it seems way higher then a piece of paper. I'd be more willing to try it if I knew how something thicker than paper levels better than paper.
He forgot to mention that the instructions says that you need to subtract the height of the device to get the correct height
I have one and I love it! I first make sure the X axis arm is snug (eccentric nuts) and then use the e-leveler to make sure the bed is square with that nozzle. Once that’s set, I use the mesh level in my Jyers firmware followed by a manual mesh adjustment. When I start my first print that first layers is dead on and OH so satisfying! Chuck has a HIT with this great little tool! 😊
It’s so simple and awesome at the same time!
@@Crosslink3D Dear author, please share the g-code file that came with the ender 3 tool, thank you! I watch your videos, very informative and useful.
85€ da hat einer den Knall nicht gehört... da bleibt ich beim kassenbon und davon hab ich rollen für lau liegen. Sonst schönes teil aber das preis leistung verhältnis stimmt da bei weiten nicht. ps dein link zum leveler zeigt mir 85€ bei Amazon.,
I'm watching this after I just bought one and I'm glad I got one for my ender 3. I only have to probe three points however.
The G-code I have for this pauses until you hit the main button again on my Ender 3.
I honestly quit printing for a while as I got so frustrated with levelling, and this little device got me back into it.
Can you use these for manual mesh leveling on an Ender v2? You can’t set the initial z offset enough to clear the thick probe?
So I'm a little confused. If it's thicker than a sheet of standard printer how does it work? After using the tool. Won't my nozzle be too high away from the surface to properly print a project?
what are those mods on the ender 3?
I'm having issues with the nozzle being to high of the leveler even after offset is at 0
Not sure what I'm doing wrong. I find leveling with paper quicker, easier and more accurate. I've had the e-leveler2 fall apart (the back riser isn't secured) while trying to use it, and the delay is definitely not long enough if you need to adjust. The manual leveling can be done quickly and you can take as much time as you need at each point. Curious if others found the same.
Make marlin mod for core xz ender 3, 💕👍
Do u have a link for that fan setup
It’s the Hero Me Fan setup. I am still on Gen 5 but there is already Gen 7
Doesn’t this change the Z home height?
How do you do both, have the bed level and the Z height at the desired height?
It seems like loading and running a G-Code is a little much when you could probably do this a lot easier by running your stepper motors manually.
Bed leveling with motors turned off is never a good idea. Weight of the gantry or pressure against the nozzle can have the z-Motor turn and then you can start over. I don’t see why running a gcode is more work. Marlin also has corner leveling which essentially does the same thing, you could just give it a different z-value for the e-leveler
If I level the bed, shouldn't the nozzle and bed be heated? Is PCB of this tool heat resistant?
I would not heat it up but you should make sure the nozzle tip is clean. Adjusting the z-offset for the first layer is something you should do by printing a test pattern and then live adjusting the z-offset in the printer menu for perfect results.
That Amazon link has some serious markup on the price of the E-Leveler - £45
I paid a lot less than that for mine ($24)
Works a treat on my non-probe printers, including my IDEX for setting E2
I have to wait 20 seconds on each corner and this is supposed to be easier than using a piece of paper? It add many layers of complexity and potential points of failure because now I have to worry about the gcode thing. A piece of paper is the best solution, especially if using a glass bed and a thin layer of glue stick which basically solves all bed leveling problems.
Looks like a great tool and Chep is a great asset to the community. Thanks for pointing out that this is a good tool even for ABL systems.
Nice product but price, no, all day long! Buy a dial indicator and print a holder, far superior, far more accurate. Far cheaper
I got an improved variant from Aliexpress for $6
Got the link for it?
I really don't get it. wouldn't a 3D touch for $15 be 100x better than this for $20? yes it doesn't compensate for bed leveling, but you can use the mesh values to adjust your bed!
You need to level the bed from time to time for best results it does not matter if you have a probe. If you need parts with perfectly flat undersides this is critical.
Aber selbst wenn es super funktioniert, sind es trotzdem noch 84€!!!! für eine Platine, LED, Widerstand,taster und Batterie. Ich weiß ja nicht.
Bei 30€ wäre ich vielleicht dabei.
Das liegt eher daran, dass es nicht aus Deutschland geliefert wird. Der Originalpreis sind 25 Dollar. Muss man abwarten , ob sich ein EU Händler findet, für den Vertrieb
@@Crosslink3D Ah ok das klingt plausibel.
Dann muss eine Möglichkeit gefunden werden das aus Europa zu versenden.
Produkt simpel aber gut.
@@Crosslink3D und direkt von PCB way bestellen, wäre das keine Option?
Chep bekommt sein Geld und pcbway übernimmt die Logistik???
Amazon hat Klone für 25.
@@crowguy506 Aliexpres auch für 15€
This is an extra overpriced device, 45 £ for only a LED, Button and Battery(Key Chain LED). The net price for everything is under 5£.
Agreed, I couldn't believe the price TBH.
I got mine shipped to my door for $6, from Aliexpress. It looks better too
@@0xskynet Thanks just ordered one for about £5 😆
@@0xskynet link?
Keyword "E-Leveler Tool"
I have a background in electronics and I can tell you one thing for sure, it's ridiculously overpriced. Dunno why there aren't any Chinese knockoffs yet. However I like CHEP's Filament Friday channel so I'm asking myself why not buying one of those to support the channel instead of building one myself 🤔
I'm an engineer and I will say since YOU believe it is so ridiculously overpriced, why don't you...
1. Design your own PCB
2. Design the plastic end piece
3. Get the the PCBs manufactered
4. Get the tooling done for the plastic end piece
5. Get those plastic pieces manufactured
6. Get all of those along with the switches, battery holders, batteries and leds to an assembly house...along with all the packaging, btw
7. Get the finished product imported so you can start selling them for $5 each and realize your reasonable profit margin.
And I said "imported" because there is NO WAY you will get all that done, in this country today, and be able to sell it for less than CHEP is selling his.
For the people confused:
The E leveler uses a print file that stops at a point higher then the home BUT at the hight where the leveler has the marked center point after the print is done it will go back to home and the regular printing height.(if you're still confused there's no hope for you)
Is Godzilla ok?