While I was changing my engine oil, instead of using compressed air (Not everyone has this method at their disposal) I decided to hold a bike pump in the dipstick part to blow any excess oil out, this worked like a treat! Thank you so much for this video!
+Bintelli Scooters this helped me alot. Also can you let me know what's the part called that holds the back trunk. like the spoiler. it doesn't pop up on ebay if I put moped spoiler
Thank you very much that is a great idea, as i dont have an air pressure machine as the person who uploaded the video never gave an alternative method of getting rid of oil.
Thanks for the video. Very clear and concise. Been changing oil in my vehicles for 30 years. Now i just purchased a scooter and was wondering how to change its oil. Im looking for a canister oil filter 🤣🤣😂. Maybe a tiny one for 49 cc🤣🤣😂. If i didn't already purchase one i would look you guys up to buy my scooter. Thanks again!
oh yeah,, thank you 4 answering a question I've been wondering about for a long time,, which was whether to check the oil on its stand or just hold it straight ?? also, can i put synthetic oil in ?? thanks alot, its nice to know theres people out there that care enough to make a video and explain step by step. thank you so much for helping me take care of my scooter.
Hello brother Thank you for this demonstrative video. I got mine to the mechanics and I can see that the oil engine is too much. How can I minimize it at home myself?
Hi - the oil is not flowing into the engine when refilling. You mentioned a kinked hose on the crank case. Can you point me in the direction of this hose? Obviously don’t want to run engine with partial fill.
Great video, very clear informative service vid. Answered my thoughts on where the hell is the oil filter, tiny little thimble sized filter, quick clean while checking for excessive metal particles, job done. Thanks, Vinny. :-)
I have a question about throttle response. I just service a Taihou Zhen 49cc scooter and it's still doing the same thing when I give it the throttle... Bogs down. I've disassembled and cleaned the carburetor , blown out the fuel filter, changed the oil, fresh fuel, new plug... I do small engine repair and usually find that this is the main jet but the jets and carb are clean. What else could it be.? Any help is greatly appreciated.
My son when i first got mt 50cc tao tao he drained the shipping oil out to put in oil he drained on both sides was that ok? Also when he drained the shipping oil the spring, the oil filter and a rubber o ring came out couldn't ever find out where it went so it wasn't put back in and forgot about am i going to have more problems with doing that. Please let me know
Ok, so you had the oil level up to the second X, but you didn't screw it in. When you then screwed it in, wouldn't it have been over filled as the dipstick went in over a half inch more?
I seen from another video that there's a little ball bearing that come out when you pull the drain plug out? he also said it ruins your bike?? I need your help to tell me if that's true or.not. thanks!
I have a problem with my scooter, the oil is not going in the engine I heard you mention something about a kink hose on the crankcase , where exactly can I locate that hose please help.
Your not supposed to drain the oil from the bottom it's best to drain it from the other side of the scooter because when the spring comes out there is a little ball bearing that will fall out in the oil and no one realizes it. the ball bearing plays an important role with the oil and engine.
Hi do you know anything about Longjia chinease scooters? Need a rear shock changing and not sure what size i need ..bike is 2017 4 stroke..longjia digita 51
Would changing your own oil void warranty? I've got the havoc 150(green).. I've did it in my other scooter and never had issues but then again that one had no warranty.
Bryan, it is highly recommended that you have your local dealership do your oil changes and valve adjustments. When you bring it in for servicing, they are trained to properly inspect the scooter to ensure that other issues do not present themselves. If you're lucky enough to have a Bintelli dealer in your area... please support and use them!
Obey Rhadx Won't let me send message. the bulb says 12V35/35W on it. It has a weird nipple shape on tip, which made finding it easier. bout it at Batteries and Bulbs locally
Should I use 10-30 or 10-40? I used 10-30 the first time but I was told from a scooter place 10-40 is a little better and recommend and he said he used all year no problems
I don’t see why not. Most scooters are the exact same set up. I had a 1986 Yamaha CA50 and now a taotao pony 50-exact same set up. The only real differences are whether it’s computer controlled and/or water cooled.
Why aren't you draining the oil from the proper draining bolt on the other side of the bike (to the right of the engine ID plate)? This is why you are finding that it hasn't drained fully. Not a great example.
this other video said something about a small bb falling out!....that if it falls out u won't get oil pressure to the top end!....what bb is he talking about?
there is no bb......hes just trying to sell shit on his website..that jeremy vinup guy..........no seasoned scooter guys in any forums or on here speak of this mystery bb...no worries
I just dropped my 50cc kymco scooter I picked it right up but seen there was fluid on the ground it was running when it dropped. But I turned it off right away so I just ruin the bike? It did however start right up no problem. I'm letting it set over night thou.. HELP
You may want to bring it into a local dealership if it's leaking oil... sounds like something is wrong with the engine and needs more than an oil change!
my jonway has a bintelli engine on it underneath the gearbox is a nipple if I remove my breather hose from it I lose gear oil but if I put the hose back no leak why was this put here?
Hello Steven. I would recommend you keep the hose one as the manufacturer has deemed it necessary for your engine. If you'd like, you could bring it in to a local shop for a full inspection. Thanks!
Now I'm an idiot and was new to moped I bought this April and was told it need 10w40 oil I went into store and didnt know where to find it The dude showed me where the oil was and told me that ths specific one was 10w40 LMFAOOO I had the back for 3 weeks and haven't been properly doing oil change just adding, and I used 20w 50 and I just realized this now Is my bike fucked ??🤔 it only has 351 miles Tomorrow I plan waking up and doing a proper oil change and use air from gas station to clean it out fully Is my engine fucked 😅???
No No No No NO Wrong!!! ALWAYS drain the oil when the engine is warm!! It will all come out, so many so called "Professionals" miss this step, if you arent gonna warm up your engine before draining the oil, you may as well not do it!! Blowong air through the engine?? Wow janky. Dont follow this.
@@matowixunplugged7927 this method is older than most people realize, yes it will mostly all drain out. With the key off on my scooter I will gently turn the engine over using the kickstarter a few times, this helps get the last few milliliters out.
motmot welch 25.35 fl oz. It will be to much though. Unless it has no oil at all in it. Start with 24 check the dipstick and pour in some more if needed. Dont overfill. Grtz
Ok but why is the paper off the 10w-40? And is there a way we @bintelli can contact on phone cause i have the same moped i only know how to ride not chamging the oil and stuff like that?
I don't know if I agree with using compressed air either, but I guess you can. I think I'd rather pour some new oil in there with the drain plug open. I also walk away, let it go for a few hours lol. But back to the compressed air, if people do that.. The compressor should be drained at the bottom weekly so there is next to no moisture.
How will that moisture effect anything? The engine will continue to lubricate the parts once it's filled that minute amount of moisture will dissipate through the vent.
my left ear enjoyed this video
Sky Anthro lmao thought I was the only one
Lol lol
That’s what happens when a mechanic tries to be an audio engineer
While I was changing my engine oil, instead of using compressed air (Not everyone has this method at their disposal) I decided to hold a bike pump in the dipstick part to blow any excess oil out, this worked like a treat! Thank you so much for this video!
+Rubed Islam Very cool! Thanks for sharing... and you're welcome!
+Bintelli Scooters this helped me alot. Also can you let me know what's the part called that holds the back trunk. like the spoiler. it doesn't pop up on ebay if I put moped spoiler
Thank you very much that is a great idea, as i dont have an air pressure machine as the person who uploaded the video never gave an alternative method of getting rid of oil.
+remote_shines 17 Maybe a little late but usually called a pillion holder/grip? something along the lines of pillion...
Great Idea Rubed and this was a good video :)
You're a good, articulate teacher!
Thanks from Maine USA.
Thanks for the video. Very clear and concise. Been changing oil in my vehicles for 30 years. Now i just purchased a scooter and was wondering how to change its oil. Im looking for a canister oil filter 🤣🤣😂. Maybe a tiny one for 49 cc🤣🤣😂. If i didn't already purchase one i would look you guys up to buy my scooter. Thanks again!
I just bought a Vip 49cc Moped and been wondering how to change the oil and what kind of oil to put in,thanks for this video,really helpful.
oh yeah,, thank you 4 answering a question I've been wondering about for a long time,, which was whether to check the oil on its stand or just hold it straight ?? also, can i put synthetic oil in ??
thanks alot, its nice to know theres people out there that care enough to make a video and explain step by step. thank you so much for helping me take care of my scooter.
I've read synthetic oil shouldn't be used until after the first 300 miles
We all need more Bintelli Beast 150cc videos please...
Thanks a lot for making this video. I can now save an extra $30 for an oil change.
Very nice tutorial, gearbox oil and spark plug change tutorial will be nice.
very useful tutorial earned a like and subscription
Hello brother
Thank you for this demonstrative video. I got mine to the mechanics and I can see that the oil engine is too much. How can I minimize it at home myself?
Hi - the oil is not flowing into the engine when refilling. You mentioned a kinked hose on the crank case. Can you point me in the direction of this hose? Obviously don’t want to run engine with partial fill.
thank you for this video! there is nobody in my area who does this
Can you do a video for changing the oil filter on a 49cc moped??
Great video, very clear informative service vid. Answered my thoughts on where the hell is the oil filter, tiny little thimble sized filter, quick clean while checking for excessive metal particles, job done. Thanks, Vinny. :-)
Can be a good thing to warm the engine up by running it. So the settlements in the old oil doesn't just mix with the new.
Leaf blower make work also but take care to not blow dirt etc...use a clean rag over hose end
Thank you Jason. Great Video
I just purchased a new Geely 49.3 cc scooter. Gona drain oil before I run it.
Don McC. Here why did u not screw the dipstick in when Cking the oil level should I not screw it in to ck the amount
Do u have the video "How to change the tail light assembly" with new one? Thx
How many miles from brand-new should it be changed? I was thinking 500, i have a Valvoline synthetic oil
My scooter is used and the bolt for the oil to remove it is stripped. How can I get it out. Would a pipe wrench work?
This was very helpful
is it better to run the engine for 5 minutes then change, just wondering.?
how do i change the tail light bulb on this model??? i cant even get to the bulb. And there arent any videos online to help
I have a question about throttle response. I just service a Taihou Zhen 49cc scooter and it's still doing the same thing when I give it the throttle... Bogs down.
I've disassembled and cleaned the carburetor , blown out the fuel filter, changed the oil, fresh fuel, new plug...
I do small engine repair and usually find that this is the main jet but the jets and carb are clean. What else could it be.? Any help is greatly appreciated.
My son when i first got mt 50cc tao tao he drained the shipping oil out to put in oil he drained on both sides was that ok? Also when he drained the shipping oil the spring, the oil filter and a rubber o ring came out couldn't ever find out where it went so it wasn't put back in and forgot about am i going to have more problems with doing that. Please let me know
I have the scorch model what brand of oil do I need and how much I put in?
Also another tip if worried bout metal in oil u can use a magnet & fish thru old oil will give u an idea if any bad wear etc...
There is a drain plug on the other side the one you are doing is the filter if look you will see it right opposite don't need a air line.
Ok, so you had the oil level up to the second X, but you didn't screw it in. When you then screwed it in, wouldn't it have been over filled as the dipstick went in over a half inch more?
What's the name of this scooter that's used for this demonstration video ?
I seen from another video that there's a little ball bearing that come out when you pull the drain plug out? he also said it ruins your bike?? I need your help to tell me if that's true or.not. thanks!
Great Thank You. This helped me a lot. I just bought my used scooter. I love it.
I have a problem with my scooter, the oil is not going in the engine I heard you mention something about a kink hose on the crankcase , where exactly can I locate that hose please help.
Your not supposed to drain the oil from the bottom it's best to drain it from the other side of the scooter because when the spring comes out there is a little ball bearing that will fall out in the oil and no one realizes it. the ball bearing plays an important role with the oil and engine.
Wasn’t one when he took it out
i changed my bike's oil while it was on the kickstand on the side(smaller one). is that fine?
I use specific motorcycle oil Havoline 10w_40 super 4T semi synthetic for my 125cc scooter .. is it good
What about the torque specs on the drain plug ? Which is 15 ft. lbs.
Hi do you know anything about Longjia chinease scooters? Need a rear shock changing and not sure what size i need ..bike is 2017 4 stroke..longjia digita 51
is Castrol 464622 CASTROLPOWER 1 Racing 4T 10W-40 good for a SYM Mask 50cc 4T?
Is the oil filter mesh washable??
very clear and helpfull
thank u so much
excelent explication, thank you
Can you tell me where to get a hyosung beaver 125cc scooter service manuel. Have u ever seen or serviced one of these ?
thank you for lerning.... متشکرم از آموزش شما
hi i have a bintelli scorch 50cc please tell me why diesel oil is used.
Would changing your own oil void warranty? I've got the havoc 150(green).. I've did it in my other scooter and never had issues but then again that one had no warranty.
Bryan, it is highly recommended that you have your local dealership do your oil changes and valve adjustments. When you bring it in for servicing, they are trained to properly inspect the scooter to ensure that other issues do not present themselves. If you're lucky enough to have a Bintelli dealer in your area... please support and use them!
Is there a oil filter?
Can you do a video on how to change the tail lights on this scooter please
How would you know how much you put in?
Is chinese sweet 2022 125cc engine 4 strokes ?
My oil drain plug is leaking after. Did I put it on wrong? Does it need a new gasket thing? Idk 😭
Hi, after draining the oil ,do i use the same oil that i put in my tank or do i have to get engine oil
10w-40 oil is what these guys usually take. Bet there's a sticker somewhere on yours that specifies for sure, though, or check your manual.
i have a question how do you replace the headlight of the bentelli sprint and what size is the bulb?
Obey Rhadx it's a bitch to do, but I figured it out. let me know if u still need help
David Hamilton so whats the size?
Obey Rhadx Won't let me send message. the bulb says 12V35/35W on it. It has a weird nipple shape on tip, which made finding it easier. bout it at Batteries and Bulbs locally
I have a yamaha jog 50cc had to put car oil to make it to work but ended up jamming the kickstart won turn on how can i fix
Should I use 10-30 or 10-40? I used 10-30 the first time but I was told from a scooter place 10-40 is a little better and recommend and he said he used all year no problems
10/40 in normally temperature
10 meaning can handle cold days and 40 meaning work Good in temperature between 10 and 40
15w40
Have a 49 cc taotao and no clue if anyone around would be able to work on it if it came down to it
I don’t see why not. Most scooters are the exact same set up. I had a 1986 Yamaha CA50 and now a taotao pony 50-exact same set up. The only real differences are whether it’s computer controlled and/or water cooled.
my 49cc scooter cranks but won't start. Found out there's no oil. Will that make it not start?
Matari 7 yes if you keep oil in it then it will run.
Ok thank you
Yes they have a low oil cutoff switch
What kinda oil do you use
old oil looks so clean
What kind. Of oil do I put in a 50 cc Yamaha. Scooter. I just. Bought it. From someone n it. Needs oil now
Why aren't you draining the oil from the proper draining bolt on the other side of the bike (to the right of the engine ID plate)? This is why you are finding that it hasn't drained fully. Not a great example.
first oil change you have to clean filter
When you have to correct the company that makes these scooters 🤣🤣 ssd
Is it full synthetic or no ?
this other video said something about a small bb falling out!....that if it falls out u won't get oil pressure to the top end!....what bb is he talking about?
there is no bb......hes just trying to sell shit on his website..that jeremy vinup guy..........no seasoned scooter guys in any forums or on here speak of this mystery bb...no worries
I just dropped my 50cc kymco scooter I picked it right up but seen there was fluid on the ground it was running when it dropped. But I turned it off right away so I just ruin the bike? It did however start right up no problem. I'm letting it set over night thou.. HELP
It’s should me fine
I have a pgo big max naked and my motor is leaking dark oil, do you know if its possible to do a oil change on it?
You may want to bring it into a local dealership if it's leaking oil... sounds like something is wrong with the engine and needs more than an oil change!
Add
Is a bintelli scorch a scooter I look for them on UA-cam but can’t find any on here much a guy wants to sell me one for 500$ 500 miles
my jonway has a bintelli engine on it underneath the gearbox is a nipple if I remove my breather hose from it I lose gear oil but if I put the hose back no leak why was this put here?
Hello Steven. I would recommend you keep the hose one as the manufacturer has deemed it necessary for your engine. If you'd like, you could bring it in to a local shop for a full inspection. Thanks!
Can i put 10-40 w amsoil
metric
motorcyle oil in my 49cc scooter ?? will it hurt it??
qixman55 I put it in mine and it’s going good I just Dd a oil change and put only 10w-40 oil in it and in gunna see if it works or not
My oil change didn't go to plann
okay and what if i dont have compressed air?
Just means you have some old oil in the engine. This is not a big deal if you change oil at the specified intervals of your owners manual.
Thanks 🙏🏻 man
hi how to put ignition switch on.
thnk u.
Herbert Crespo what kind of spark plug do I use for my flight scooters 2009
What kind of spark plug do I need for 2009 fly scooter
Good job here.You even mentioned oil type.A lot of them do not.
Thanks. very useful video.
I have the same scooter, what oil do I need 2t or 4t?
4t
Than you good video 🙂
Good video
Now I'm an idiot and was new to moped
I bought this April and was told it need 10w40 oil
I went into store and didnt know where to find it
The dude showed me where the oil was and told me that ths specific one was 10w40
LMFAOOO I had the back for 3 weeks and haven't been properly doing oil change just adding,
and I used 20w 50 and I just realized this now
Is my bike fucked ??🤔 it only has 351 miles
Tomorrow I plan waking up and doing a proper oil change and use air from gas station to clean it out fully
Is my engine fucked 😅???
you are professional.
Where is the battery on this scooter please
What oil do u use
i got a 250 chinese scooter what kind of oil do i use
10/40 oil
All of scooter have gear box oli?...mine look like it dose not have!!
Only 4stroke
On the 139qmb Chinese scooters, there will be gear oil near the rear wheel, the procedure is listed on UA-cam.
do 50cc 2stroke scooters have this??
soheil rnr no, 2 stroke motors do not need oil. That's why you mix oil with the fuel to keep everything lubricated.
thank you
theres a drain plug on the other side well there is on mine.
What kind of oil
Why does my drive belt flip when I'm driving
Nicholae Morrison because u have disconnected the restrictor what you have to do is cut the pink wire if you haven’t already
"Normal people at home " don't have a frkn air pressure gun
I use my air bed pump 😂
Most people do ?
Lucas Tappy Good one
Lucas Tappy nah fool, most people don’t
So the transmission oil uses the same as the engine oil?..
80-90w gear oil for "transmission"
I don't even know what to say. But I bet there are a lot of people out there thinking the same thing about this video.
No No No No NO
Wrong!!!
ALWAYS drain the oil when the engine is warm!! It will all come out, so many so called "Professionals" miss this step, if you arent gonna warm up your engine before draining the oil, you may as well not do it!! Blowong air through the engine?? Wow janky. Dont follow this.
Captain Sunday Cool. Just drives me nuts when people act like proffesionals and have no clue what they are doing...
Greg Myers did it all come out
@@matowixunplugged7927 this method is older than most people realize, yes it will mostly all drain out.
With the key off on my scooter I will gently turn the engine over using the kickstarter a few times, this helps get the last few milliliters out.
@@Frip36 now, now , let us not get toooo violent here . Its only an oil change !
1 question.... what the heck is 750 millimeters??? we go by pints and quarts here in america.... lol
www.worldwidemetric.com/measurements.html
Not every person is American although we Canadians love you
motmot welch 25.35 fl oz. It will be to much though. Unless it has no oil at all in it. Start with 24 check the dipstick and pour in some more if needed. Dont overfill. Grtz
Yamaha 100cc mope
Where can you get your 10w-40 from?
Every gas station should have 10w-30 or 10w-40.
Ok but why is the paper off the 10w-40? And is there a way we @bintelli can contact on phone cause i have the same moped i only know how to ride not chamging the oil and stuff like that?
Joey Preston when is the best time to change oil ?
👍
compressed air ? you're blasting moister in your engine .
I don't know if I agree with using compressed air either, but I guess you can. I think I'd rather pour some new oil in there with the drain plug open. I also walk away, let it go for a few hours lol.
But back to the compressed air, if people do that.. The compressor should be drained at the bottom weekly so there is next to no moisture.
How will that moisture effect anything? The engine will continue to lubricate the parts once it's filled that minute amount of moisture will dissipate through the vent.
Fire him. He putting stuff back together upsidedown
#Bintelli
Hello