Well it wasn’t nothing wrong with them shipping it..it was ups problem.. I got the package in the mail today and looks just like wat he got here..now the installation fingers crossed 🤞🏾🤞🏾🤞🏾
Your valves are more expensive then others...they look great but 19 up if valves are locked and spring removed won't cause check engine light to come on.
We are not interested in being the cheapest, just the best, and we are in more ways than just looks. Your incorrect, all of the valves, not just 19 and up can be held open if you hold them them open in some way, no such thing as locking them. Suggest you run this a bit longer to know. The motor without resistance will free wheel without a stop position so you will hear them running more often.
I had the same rattle a few weeks ago and I took in to a muffler shop, guy new the problem right away and offered this solution: he completely removed the actuator and welded them on the side somewhere as to not get a check engine light and get the open valve all the time... is this a good thing? LOL
@@williamphillips1240 1st of all, I appreciate you answering my question. Thank you. And just to clarify, when you say the motor will run more, you mean more gas consumption or what’d you mean?
For names sake, I would call it a bypass kit. You are not truly removing or “deleting” the valves. Just relocating them and bypassing their intended function, but I’m a stickler for details.
jamie, hope you dont mind me respectfully offering a counter opinion. This does delete the active exhaust in the car. active exhaust is a function not a valve. The valve is only a part of the mechanics as are all the parts. This kit is deleting the active exhaust function in the car. To bypass something you have to, by definition, go around it. This does not do that. my take, possibly we are both right
Get the Jack out, jack the car up. remove the actuator and use a zip tie? Just after you paint the hood with a rattle can., and duck tape your broken light. With deliverance banjo in the background. Bring your buddies over to show them your bitchin go fast ties. Saving a few hundred bucks, on your ride aint worth it, JOE LOL
@@williamphillips1240😂 yeah he doesn’t know what he is talking about. If you zip tie it it will literally throw a check engine light. Hey I mean if you cool with driving with a Check Engine light then be my guess
@@Pokenostalgiastore not the case in everybody situation!! some people don’t know what they doing!! I zip tied my 2019 scat pack never had a check engine light for 2 years & also I did it on my widebody & still haven’t had a check engine light I’m going 2 years strong on this one as well
Yes spring stays in and works as it usually does. seats on to a rotating platform that allows it to operate correctly and prevent any code from occurring, because its disconnected from the actual turning of the valve
Question so the first plate you put on the active exaust motar with spin the piece on the plate giving the idea its doing its job without touching the actual spring?
Yes, but to fill in a small detail. that plate also on the other side holds the valve open constantly. and the side your talking about allows the motor to function as normal and not signal the CPU.
@@williamphillips1240hello William I just wanted to ask will this work on a 2019 Dodge Charger Scat Pack cause there is a rattling on mine and it doesn't rattle when it's on track mode but I would like to know if this would fit on a charger perhaps. If it does I will get one asap.
First plate stabilizes by locking the valve wide open on the valve side. Motor side of that plate has a rotating seat for the spring, with stops that allows the motor to work exactly as it does with the spring in place as it would be OEM. Cant throw a code or bind as some kits could cause, or wear out the motor. It does what it would do as if stock accept the valve is open. It all mounts cleanly with a machined stand off for mounting the motor as it rides on the OEM set up. Noise changer only, does NOT effect emissions. Hope this helps Bill
@@leechgod3486 sounds like it will. Please see my response above this one that explains it better. track mode pins the valve open most of the time not all the time.
Is it necessary to unplug them during the install? Can't you just push them to the side while you install the the new plate and spacer? Then just swing them back into position and screw them back down. I don't see the need to unplug them which can potentially throw a code. Or am I wrong.
Will this fix the rattle from the solenoid? I tried the zip tie and spring delete but the solenoid is still kinda lose and it's still rattling a little bit.
It may or may not, Dodge has an issue with the valve itself. my product pins it open and correctly allows the motor to function normal with out binding the spring. some have used it and it solved it, Sorry cant guarantee it would stop a rattle
Why not do paint mods to your car with a spray can? Also, the factory exhaust system is actually a good system and with minor mods performs and sounds great. But for the record, your suggestion is sound and will work.
Or, like ME, don't Pay anyone Sh*t and do it yourself for FREE. Take actuator off via 3 nuts. Remove the pre-mounted spring that is attached to the actuator. Zip tie the active exhaust valve Open (I Tac Welded mine Open). Reinstall the actuator via 3 nuts. Job Finished for the extremely high price of FREEEEE! Class Dismissed...
This can absolutely be done... and wire clothes hangers with chewing gum will also work, if your going to class to be cheap on your nice ride, do it right, gum is cheaper than wire ties or a welder. (everyone doesn't have one) You can also paint your car with a rattle can, use recycled oil filters. and burn the cheapest regular gas you can find. Congratulate yourself on graduating from the school of being a tightwad or step up. Do what you can afford and spend your time on youtube bragging about it.
@@williamphillips1240that’s quite a stretch comparing using a small wire that no one would ever see to an entire paint job…. You going to have people crawl under your car so they can see your super cool $250 exhaust mod that no one cares about that everyone knows you could have just done for free? Lolololol
$220 what a rip off just zip tie it u don't need this product to open the valve u really don't..CHECK ENGINE LIGHT IS NOT COMING ON ITS A MYTH TO GET U TO BUY THESE PRODUCTS
If you get the active exhaust delete from summit racing it should get rid of codes. I used it on my 17 RT. The kit thru them easily plugs into the old plug from the active exhaust and tricks the computer , telling it that it's still connected and working properly
Great kit easy to install 👍👍😀.
Car sounds great and is very easy to rev in the regular mode just like the sport mode. Thanks Phillips performance.
Just literally installed mine and it works good so far. Thank you Phillip for your great product
If you have a 2019 or newer, you don’t need it
@@lukekoenig2487 y u say that?
@john Michael what year is your Mopar
@@VABLM757 2018 Daytona 392
@@lukekoenig2487 How so?
Well it wasn’t nothing wrong with them shipping it..it was ups problem.. I got the package in the mail today and looks just like wat he got here..now the installation fingers crossed 🤞🏾🤞🏾🤞🏾
Your valves are more expensive then others...they look great but 19 up if valves are locked and spring removed won't cause check engine light to come on.
We are not interested in being the cheapest, just the best, and we are in more ways than just looks. Your incorrect, all of the valves, not just 19 and up can be held open if you hold them them open in some way, no such thing as locking them. Suggest you run this a bit longer to know. The motor without resistance will free wheel without a stop position so you will hear them running more often.
Another good product.
Thanks Greg
Is there a video for how it sounds after install?
Yes its on you tube
How funny bro came across this video searching for challenger active exhaust, and I was like dude I know this guy. It’s Art from Toyota btw
Just ordered one, nice one.
19 and newer don't throw codes if u remove spring
My challenger throwing 2 codes for the active exhaust if I buy this product will I still have to buy a new factory motor ?
Our system will not correct or solve code issues. It pins the valve open and allows the motor to function as it would normally
Sample of how it sounds. Also would this work and make a SXT plus roar a little bit more.
I had the same rattle a few weeks ago and I took in to a muffler shop, guy new the problem right away and offered this solution: he completely removed the actuator and welded them on the side somewhere as to not get a check engine light and get the open valve all the time... is this a good thing? LOL
not a good or bad thing. will work. motor will run more than normal because there is not stop as it has factory , thats all
@@williamphillips1240 1st of all, I appreciate you answering my question. Thank you. And just to clarify, when you say the motor will run more, you mean more gas consumption or what’d you mean?
@@georgeperez6114 electric exhaust valve motor will run more. Has no stop position as the valve or a kit would act as.
For names sake, I would call it a bypass kit. You are not truly removing or “deleting” the valves. Just relocating them and bypassing their intended function, but I’m a stickler for details.
jamie, hope you dont mind me respectfully offering a counter opinion. This does delete the active exhaust in the car. active exhaust is a function not a valve. The valve is only a part of the mechanics as are all the parts. This kit is deleting the active exhaust function in the car. To bypass something you have to, by definition, go around it. This does not do that. my take, possibly we are both right
Do you recommend using any medium or blue Loctite to the threaded posts that you install on the adapter plate?
sorry so long to answer. Yes
hello i have a new dodge challenger 2019 r / t Scat Pack wide body. does this system work there too? thanks a lot
Good question
Yes
So if u shot down the car the valves open full till next start?
On my way to order this kit for my 18 charger 392
Do u think I can put it on my 2017 challenger and d u think it will show any codes?
Just use a zip tie. Takes 15min. remove cover turn to open zip tie done.
Get the Jack out, jack the car up. remove the actuator and use a zip tie? Just after you paint the hood with a rattle can., and duck tape your broken light. With deliverance banjo in the background. Bring your buddies over to show them your bitchin go fast ties. Saving a few hundred bucks, on your ride aint worth it, JOE LOL
Bro that dude look scary af in the thumbnail
Beta
@@bigdaddymikeeo6938 cuk
You don't need it .just remove the spring tie wrap the valve open and put motor back minus the spring. Done!
If it throws a light, you will know this clown only knows what he guesses. Troll on
@@williamphillips1240😂 yeah he doesn’t know what he is talking about. If you zip tie it it will literally throw a check engine light. Hey I mean if you cool with driving with a Check Engine light then be my guess
You called it thanks @@Pokenostalgiastore
@@Pokenostalgiastore not the case in everybody situation!! some people don’t know what they doing!! I zip tied my 2019 scat pack never had a check engine light for 2 years & also I did it on my widebody & still haven’t had a check engine light I’m going 2 years strong on this one as well
With this kit do we need the spring from the original simulator or does it not need the spring?
Yes spring stays in and works as it usually does. seats on to a rotating platform that allows it to operate correctly and prevent any code from occurring, because its disconnected from the actual turning of the valve
@@williamphillips1240 thanks for the reply 🙏 sounds like the way to go gonna invest in one. Sick of my CEL on just cause my cat backs
Does it fit on a charger though?
Yes
Sooo ups said a accident has happened so it delay my shipment has anyone ever went through this
Would this work on a 17 rt 5.7?
Your website is sold out, will you be selling them soon or no?
should have them in stock in under 3 weeks from now. Sorry for the delay
Where do I order this ??
What happens if the motor is busted? Will this still work?
Depends on what you mean by busted. It will hold the valve open
When will you get these back in-stock?
yes should be in the next few weeks
Question so the first plate you put on the active exaust motar with spin the piece on the plate giving the idea its doing its job without touching the actual spring?
Yes, but to fill in a small detail. that plate also on the other side holds the valve open constantly. and the side your talking about allows the motor to function as normal and not signal the CPU.
@@williamphillips1240hello William I just wanted to ask will this work on a 2019 Dodge Charger Scat Pack cause there is a rattling on mine and it doesn't rattle when it's on track mode but I would like to know if this would fit on a charger perhaps. If it does I will get one asap.
First plate stabilizes by locking the valve wide open on the valve side. Motor side of that plate has a rotating seat for the spring, with stops that allows the motor to work exactly as it does with the spring in place as it would be OEM. Cant throw a code or bind as some kits could cause, or wear out the motor. It does what it would do as if stock accept the valve is open. It all mounts cleanly with a machined stand off for mounting the motor as it rides on the OEM set up. Noise changer only, does NOT effect emissions. Hope this helps Bill
@@leechgod3486 sounds like it will. Please see my response above this one that explains it better. track mode pins the valve open most of the time not all the time.
@@williamphillips1240 thank you really made me understand it better and will get one soon hopefully it fits
Is it necessary to unplug them during the install? Can't you just push them to the side while you install the the new plate and spacer? Then just swing them back into position and screw them back down. I don't see the need to unplug them which can potentially throw a code. Or am I wrong.
you could be right, meaning both ways could be right. Im positive that unplugging and replugging them in does not throw a code. Done it many times
@@williamphillips1240 I'm throwing a p121b after 500 miles on a new actuator. Will a kit like this eliminate the code?
@@mikeprice8307 wish i could say it would. plug the motor in an wire it up out of the way to test if its the valve or motor issue
Does it fit on a dodge challenger hellcat 2015 mod? And if it fits, do you get any fault codes or lamps in the dashbord?
Sorry not sure what Mod means? will not through codes
Just a 2015 year modell, but thank!
And do you ship to Norway?
@@jonasskatter349 If the car has active exhaust, they all use the same system and this will work. yes we ship to norway
@@jonasskatter349 yes we do
So no kit for 2021 Scatpack 392's?
this one works for any with Active Exhaust Scats included
Do dodge challenger v6 have a active exhaust valve?
No sir they do not
Good idea, no longer available?
Sorry didnt want to back order anyone should have them this month again
@@williamphillips1240 thanks!
Will this fix the rattle from the solenoid? I tried the zip tie and spring delete but the solenoid is still kinda lose and it's still rattling a little bit.
What did you do to fix? I have a bad rattle and nothing online seems to fix jt
Did you fix it guymusic?
@chaffycaesar8026 there was a kit that provided a bushing/buffer to put in that area that holds it. I just forgot the name
@@n0bly_hades I wouldn't say that it fixed it but I did minimize it.
I just when to get the tsi today, and obviously didn’t pass because the check engine light smh
Will this stop the rattle
It may or may not, Dodge has an issue with the valve itself. my product pins it open and correctly allows the motor to function normal with out binding the spring. some have used it and it solved it, Sorry cant guarantee it would stop a rattle
What are you called that factory motor? Do you know the part number
Sorry don't know the part number. The factory motors are what powers the opening and shutting or the Active exhaust system
I know that but I’m trying to find the motor and then buy your part one of my motors is bad
Will a mid muffler delete fix the problem ???
What problem? If you mean make it sound different, that will, but the Active Exhaust will always open and shut to reduce sound. Hope this helps
My car dose this squeak I was wondering if this will help get rid of the problem
shaaaspring loaded brah
How much for the delete kit
220
How much is that kit?
220
why not just do the free mod? hold it open with a piece of wire or zip tie and save yourself $150+ until you decide to get a exhaust system
Why not do paint mods to your car with a spray can? Also, the factory exhaust system is actually a good system and with minor mods performs and sounds great. But for the record, your suggestion is sound and will work.
Work on 21 charger?
Yes sir it does
I installed em and I hear a rattle when I turn the car on does anyone know why??
Installed wrong or the rattle is not from this.. your the first check each one for the spring correctly installed call me if I can help
You have a shop?
@@JuanRamirez-ff9li yes bring it by glad to take a look
Bro forget to start the car to see the sound difference 😅😅😅😅
So True thanks never crossed my mind
Is this also applicable to a V6 Challenger too?
No, I do not believe they have active exhaust
Just zip tie the sucker's saves u time and money u don't need no kit everyone is trying to make a piece of change 😅😅😅😅
Says the faceless expert with no pic info or followers.
lol $75 worth of parts and selling it for $220. what a joke.
Would you be willing to sponsor me?
Who in their right mind is going to do this?
Those smarter than you
I am I am. Got my kit i today.
Who in their right mind comments on something they know NOTHING about
Or, like ME, don't Pay anyone Sh*t and do it yourself for FREE. Take actuator off via 3 nuts. Remove the pre-mounted spring that is attached to the actuator. Zip tie the active exhaust valve Open (I Tac Welded mine Open). Reinstall the actuator via 3 nuts. Job Finished for the extremely high price of FREEEEE! Class Dismissed...
This can absolutely be done... and wire clothes hangers with chewing gum will also work, if your going to class to be cheap on your nice ride, do it right, gum is cheaper than wire ties or a welder. (everyone doesn't have one) You can also paint your car with a rattle can, use recycled oil filters. and burn the cheapest regular gas you can find. Congratulate yourself on graduating from the school of being a tightwad or step up. Do what you can afford and spend your time on youtube bragging about it.
@@williamphillips1240that’s quite a stretch comparing using a small wire that no one would ever see to an entire paint job…. You going to have people crawl under your car so they can see your super cool $250 exhaust mod that no one cares about that everyone knows you could have just done for free? Lolololol
some do things right, some do it anyway they can get it done. Depends on which way you stretch Lolololol@@TimothytheTooth
Ssshpring loaded lol
Hi Alex. this what you heard when you connected the power up again ?
Scammer
$220 what a rip off just zip tie it u don't need this product to open the valve u really don't..CHECK ENGINE LIGHT IS NOT COMING ON ITS A MYTH TO GET U TO BUY THESE PRODUCTS
You can also rattle can your car if you need it painted. Play at your level junior.
Would this work on a 2017 charger hellcat???
Absolutely thanks
Does this work on a aftermarket exhaust with codes?
If you get the active exhaust delete from summit racing it should get rid of codes. I used it on my 17 RT. The kit thru them easily plugs into the old plug from the active exhaust and tricks the computer , telling it that it's still connected and working properly
Z automotive