I love the Jet, it needs a lil more bench time, but for a couple hundred bucks, very capable to 50 yards with a 7.9 inch barrel. Unregulated. A lighter return spring and transfer port deburr, and polish. Also polish barrel. DO NOT shim the hammer spring, or add a stronger spring behind hammer, it will break the valve. I am seeing 719-712 fps in 2 .25 cal mags on the chrono, with a buck rail 3d printed suppressor. Mine is a Jet 1 with a bottle to feed it. I only feed it 33 grain diablo king heavies.Probably around 21-22 fpe.
Thanks for watching ! Here's a link Lab Jack Stand Table Lift, Aluminium Oxide Laboratory Support Jack Platform Lab Lift Stand Table Lab Stand Lifter (4"X4") a.co/d/1WSiMuR
That was good shooting to me. I have the jet 1 in .22 with Donny Fl moderator. Its like the sound of spitting seeds & very accurate for me with just the flipped up sights. Liked & sub👋👋👋
Awesome Video!! I just got the .177 version...becuase of the high velocity, cheap to shoot, plink with and may even hunt with it....using heavy .177 slugs. Any ammo tips for the .177 version? thanks
.177 has a really hard time being "Heavy". The .25 cal version with 33 grain pellets hits pretty hard, even before a few cheap mods. I bet you get 7 mags before refill. I have this in jet 1 25 cal, it is really sleek and light without an additional air tank under barrel.
This Picatinny mount requires no modification but when mounted it is slightly off-center left or right depending on which way you have it mounted but it's easy and simple and strong. Thanks for watching and here's a link. www.ebay.com/itm/145154617373?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=-syg76gvtsa&sssrc=4429486&ssuid=DCivFFvDTl6&var=&widget_ver=artemis&media=COPY
And here is the link to the Picatinny mount that had the bipod on it in the video it requires you to cut out a quarter inch slice out of the cap to make it two pieces to make it work on the jet. www.ebay.com/itm/121732847492?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=YUscSM55RCi&sssrc=4429486&ssuid=DCivFFvDTl6&var=&widget_ver=artemis&media=COPY
The valve geometry is pretty efficient on this shooter. I have the jet 1 and bottle feed it so I dont notice the shot string, but even before it was 2 full mags in 25 cal at 50 yards. after a barrel polish of course.
I actually think this is the best video I have seen on the Jet2.
it's a good one
Great video. Very cool little PCP. My 25cal Jet 2 is very accurate also. Doesn't shoot very fast but a very fun airgun. Thanks for the Vid.
Awesome!
Glad you think so!
I've ordered a mic that I'll probably be trying on the 177 video see if that helps with some of the audio when I'm away from the camera.
@@gumbystown I thought your audio was fine kind sir! But thank you for thinking of us if you thought something was a miss! Cheers!
Thank you for the nice beer. Looking forward to the 177.
The .177 should be on Saturday thanks for watching.
Good stuff man, cool airgun 💪😎
Thanks 👍
I love the Jet, it needs a lil more bench time, but for a couple hundred bucks, very capable to 50 yards with a 7.9 inch barrel. Unregulated. A lighter return spring and transfer port deburr, and polish. Also polish barrel. DO NOT shim the hammer spring, or add a stronger spring behind hammer, it will break the valve. I am seeing 719-712 fps in 2 .25 cal mags on the chrono, with a buck rail 3d printed suppressor. Mine is a Jet 1 with a bottle to feed it. I only feed it 33 grain diablo king heavies.Probably around 21-22 fpe.
Nice I like my 177 jet 2
You got it looking nice 👍🎯🎯🎯
It's crazy I was going to do a review with the jet 2 as well today
Its a an undersung masterpiece!
Thank you for this review.
Would you mind sharing the brand and source of the scissor action stage that you use as a buttrest.
Thanks for watching ! Here's a link
Lab Jack Stand Table Lift, Aluminium Oxide Laboratory Support Jack Platform Lab Lift Stand Table Lab Stand Lifter (4"X4") a.co/d/1WSiMuR
Did you film this recently? We don't have much snow here in Northern Wisconsin.
Yes it was filmed within the last week . Thanks for watching.
No problem. I subscribed
That was good shooting to me. I have the jet 1 in .22 with Donny Fl moderator. Its like the sound of spitting seeds & very accurate for me with just the flipped up sights. Liked & sub👋👋👋
Sumu?
Great video Derrick, thanks for the info of this model Jet II. What model of scope do you use?
Awesome Video!! I just got the .177 version...becuase of the high velocity, cheap to shoot, plink with and may even hunt with it....using heavy .177 slugs. Any ammo tips for the .177 version? thanks
.177 has a really hard time being "Heavy". The .25 cal version with 33 grain pellets hits pretty hard, even before a few cheap mods. I bet you get 7 mags before refill. I have this in jet 1 25 cal, it is really sleek and light without an additional air tank under barrel.
those bottle clamps ar hard to find at a decent price, where did the can come from? great video sir
This Picatinny mount requires no modification but when mounted it is slightly off-center left or right depending on which way you have it mounted but it's easy and simple and strong. Thanks for watching and here's a link.
www.ebay.com/itm/145154617373?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=-syg76gvtsa&sssrc=4429486&ssuid=DCivFFvDTl6&var=&widget_ver=artemis&media=COPY
And here is the link to the Picatinny mount that had the bipod on it in the video it requires you to cut out a quarter inch slice out of the cap to make it two pieces to make it work on the jet.
www.ebay.com/itm/121732847492?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=YUscSM55RCi&sssrc=4429486&ssuid=DCivFFvDTl6&var=&widget_ver=artemis&media=COPY
@@gumbystown thank you
Is the power of 22 enough for hunting?
👍😉
None regulated?ore regulated?..very nice clip btw ..
The valve geometry is pretty efficient on this shooter. I have the jet 1 and bottle feed it so I dont notice the shot string, but even before it was 2 full mags in 25 cal at 50 yards. after a barrel polish of course.
I say why have 2 when you could have three
.25
This PCP is worth every penny.