Now I know why my derailleur is not shifting precisely, its because of rust deposits on the metal spring. This video really helped me a lot! Kudos to you mate!
Much cheaper than XTR and the jockey wheels can be replaced with XTR bearing jockey wheels... If l was going to upgrade or do a build this derailleur and a two chainring crank would be on top of the list. FANTASTIC value.......😃👍
I like to see todo el triperio all the parts of this single side is a lot of things to remove and putting back again, when I check my trek 3500. In the lands where I from, are dry and the dust rise from one side ends on the other side and that condition bring problem to ours bicycles specially this small thing but this video help me a lot, I enjoy watching, have a nice travel. I still learning this language i hope my words had been adequate I don't mind to hurt anyone
thank u so much for this video can do more of this like fixing shifter/shifter indicator like that it'll help a lot of newbie bikers to save money like me thank u
I just got the 5100 groupset. Gonna save your video for when I need to watch this again lol.. How many miles with easy trail riding do you suggest doing the service?
Waay too much work to keep a derailleur working. Just got slx 12 spd this year and was surprised how high maintenance the rear mech clutch is. Never have to deal with this using sram eagle.
I just subscribed to your channel. My MTB Ibis Ripley AF Deore 12 speed rear deraileur inner cage bent and broke. Can i just get the inner and outer cage replaced or i need the entire derailleur replaced?
Hello. Thank you very much! You can find Shimano cage separately for m7100 but it fit also to m6100. Number Y3FY98050 Y3FY26000 in Shimano catalog. Try it and write me else. Good luck
@@mtb717 та в том и дело, что у меня её нет, и чтобы поставить переклюк с муфтой, мне пол-байка придётся заменить😂 да и сама по себе база не заслуживает дорогих компонентов, у меня кинетик шторм) вот и выдумываю, как бы и где бы схитрить, чтобы всё было и тихо, и недорого))
Is there only one position for the tension spring to go back or can extra tension be found / alternative hole spring position as in other Shimano derailleurs?
done sir thanks, my another problem is that the pin that hold the lock out is loose, it doesn't hold the lock out,it keeps on dropping, in the mark 11:30 the small pin.
@@mtb717 ye it was the b screw thread. I may of stripped the thread but the newer mechs deffo aren't as durable as the older shimano mechs. I have essentially had to sandwich the bolt with 2 nuts on either end but this has resulted in not having full b screw adjustment :(((
Please, subscribe to my channel! ❤❤❤
Now I know why my derailleur is not shifting precisely, its because of rust deposits on the metal spring. This video really helped me a lot! Kudos to you mate!
Thanks! Nice to hear that.
Thank you so much for this demonstration. I was completely terrified at the thought of doing this by myself. Now I have a little more confidence 😅
Thank you! Glad to be helpful! You will succeed
Stunning job, never seen something like this before. Tiny parts disassembly, surgery accurate precission required to make it the right way. Well done!
Thank you very much! Subscribe for more videos please
Much cheaper than XTR and the jockey wheels can be replaced with XTR bearing jockey wheels...
If l was going to upgrade or do a build this derailleur and a two chainring crank would be on top of the list.
FANTASTIC value.......😃👍
Agree with you
Even put optimal torque settings, you're the boss 👍
Thank you so much. From São Paulo, Brazil...
Great video, helped me out to do maintenance to my own derailleur 👍
Thank you! Glad to hear that!
I like to see todo el triperio all the parts of this single side is a lot of things to remove and putting back again, when I check my trek 3500. In the lands where I from, are dry and the dust rise from one side ends on the other side and that condition bring problem to ours bicycles specially this small thing but this video help me a lot, I enjoy watching, have a nice travel. I still learning this language i hope my words had been adequate I don't mind to hurt anyone
I also like it! Thank for watching and nice to meet you on my channel!
Perfecto... Muchas GRACIAS
Very detailed video. Thank you so much. Now i'll try to disassemble my RD 😁
Thank you and good luck 👍
Its ok, you didn't service the jockey wheels
thank u so much for this video can do more of this like fixing shifter/shifter indicator like that it'll help a lot of newbie bikers to save money like me thank u
Thank you for watching! ❤️❤️❤️ Nice to help you
Nice job! Keep do it! Waiting for new videos
You must be good at jigsaw puzzles!!😮😮
😅😅thank you!
I just got the 5100 groupset. Gonna save your video for when I need to watch this again lol.. How many miles with easy trail riding do you suggest doing the service?
Thanks you. 1 year of riding. But if you often drive in the rain, you need to service it earlier
Thanks for the detailed demo. Shouldn't the bolts holding the pulleys in the cage be treated with some thread locker before assembly?
Yes
Mu deore xt has a micr flex with the cage and the star bolt connecting to the clutch, how can i fix that , do you have any idea sir? Thank you
Good job! Thank you very much!
Waay too much work to keep a derailleur working. Just got slx 12 spd this year and was surprised how high maintenance the rear mech clutch is. Never have to deal with this using sram eagle.
Yes, agree with you.
New subscriber here. More servicing vids please!
Ok! I will. Thank you very much
shouldve recorded the cleaning process too.
Excellent video! thanks
Thank you very much!
Hi, is there a way to adjust spring tension of the cage? My m6100 cage is so soft unlike my m5100 rd
Hi. You may screw shadow plus bolt (1:46) to adjust tension
Alguien sabe si lo puedo usar con una transmisión tiagra?
How can be remove that little spindle 3:16 if it stuck, what will i do to remove it? Thaankss
Nice video very helpful ❤
Thanks 🙏🏼
I just subscribed to your channel. My MTB Ibis Ripley AF Deore 12 speed rear deraileur inner cage bent and broke. Can i just get the inner and outer cage replaced or i need the entire derailleur replaced?
Hello. Thank you very much! You can find Shimano cage separately for m7100 but it fit also to m6100. Number Y3FY98050 Y3FY26000 in Shimano catalog. Try it and write me else. Good luck
Derailleur 10 speeds Is it good for eight 8 speeds???????
No
Интересно, получилось бы провернуть лапку ещё раз, чтобы усилить сопротивление пружины, когда собираешь обратно?
Незнаю. Врятли наверно, но есть муфта shadow+
@@mtb717 та в том и дело, что у меня её нет, и чтобы поставить переклюк с муфтой, мне пол-байка придётся заменить😂 да и сама по себе база не заслуживает дорогих компонентов, у меня кинетик шторм)
вот и выдумываю, как бы и где бы схитрить, чтобы всё было и тихо, и недорого))
@@mtb717 спасибо за быстрый ответ ;)
How did you remove the plate axle that the clutch sits on?
Hex key 4 mm
Is the bolt from the outer pulley cage removable? The one that’s connected with the rd body
No, it isn’t
Can you please do a video for Shimano Deore M5120 pls, thank you
I will do when I’ll have it
@@mtb717 yesss, thanks! Hope you get it lol, ill be waiting :D
But it have similar construction
@@nickstabz8755 ok) thank you!
@@mtb717 ohhh, well every when do you need to maintenance an rd? I use my bike every other day and wash it 1x every other week.
Is there only one position for the tension spring to go back or can extra tension be found / alternative hole spring position as in other Shimano derailleurs?
Yes, only one
how many KM you ride before cleaning it?
1700 km
How did you removed the spindle in 3:16 mark of your video sir?
just pull it
can't be remove to tight sir. Any suggestion?
Thanks in advance. 😀
@@MerlinaEntes it should come out easily. it spins or is stuck?
done sir thanks,
my another problem is that the pin that hold the lock out is loose, it doesn't hold the lock out,it keeps on dropping, in the mark 11:30 the small pin.
Is it possible to replace its cage with oversized cage?
You may try
I think yes
Is the jockey sealed bearing ?
no
nice
It is same process in Deore m5120?
Not same but similar
Why didn't you grease the pulleys?
I grease, but not for video
ua-cam.com/video/mzM_NrKwpqo/v-deo.html there you can see)
Thank you
What is the name of the bolt on the Pulley cage???
Please notice😥
how did you remove the axle
Which axle?
How if I lost the thing you show in 1:03 is it okey??
I think yes
Sir saan nyo po yan nabili?
in internet shop here in Ukraine
Thread on mine has already failed, you get what you pay for. Sigh.
my condolences(
@@mtb717 ye it was the b screw thread. I may of stripped the thread but the newer mechs deffo aren't as durable as the older shimano mechs. I have essentially had to sandwich the bolt with 2 nuts on either end but this has resulted in not having full b screw adjustment :(((
is that deore M6100??
It’s Deore M5100
But it have same construction that 6100
@@mtb717 so I can use m5100 rd in 12 speed m6100 drivetrain?
@@francisbeladas5669 no, but you can use m6100 with 11 speed cassette
@@mtb717 they said it has the same construction just without the holographic design in logo and that is the only difference in both
do you have facebook? so i can show my m5100 rd to you?
I have instagram: @kosinskiy_ilia