Це відео не доступне.
Перепрошуємо.

बाइक के इंजन में ओवरहीटिंग क्यों होता हैं? | Engine Overheating - Causes and Ways to Prevent it

Поділитися
Вставка
  • Опубліковано 11 сер 2020
  • To prevent a motorcycle engine from overheating, you will need to keep up with basic maintenance of the motorcycle such as regular oil changes and having proper coolant levels (for water cooled motorcycles). Make sure the idle screw on the carburetor is at a decent spot so the motorcycle does not maintain a high idle.
    Air cooled vs Oil cooled vs Liquid cooled - Which engine is the best? : • Air cooled vs Oil cool...
    How many km should a motorcycle run continuously? : • मोटरसाइकिल को लगातार क...
    What are Engine Oil Grades : • What are Engine Oil Gr...
    How often to change Engine Oil in Motorcycle? : • How often to change En...
    CAUSES AND WAYS TO PREVENT IT
    Initial start: When you crank up your motorcycle to leave for work everyday, please do not over rev the motorcycle as soon as you start it. Keep the engine at idle for a few minutes and let the engine oil do its job. This process is called engine warm up and doing this will keep your motorcycle’s engine healthy.
    Carburetor setting: The mixture of air and fuel entering the engine cylinder must be correct in order to overcome overheating of the motorcycle. If air/fuel mixture entering the engine is lean then there are chances of your engine overheating. So setting the carb to give a perfect mixture is really important.
    Engine oil check: Always keep your engine oil at check to overcome engine overheating. Low engine oil will lead to inadequate cooling of the engine. Engine oil must be changed at correct intervals for a healthy engine life.
    Coolant check: Liquid cooled motorcycles come with a radiator setup which circulates the coolant inside the engine to cool the engine effectively. Proper coolant capacity and a perfect mix of the coolant with distilled water makes way for efficient cooling.
    Faulty radiators and radiator fan: Radiator is a part which circulates coolant into the engine. The coolant when circulated, carries all the heat. If the radiator is covered with dust and waste particles, the heat dissipation will not be complete and the coolant will not cool enough to enter the engine again. Keeping the fins of the radiator clean is a very important part to aid for better cooling.
    Radiator fans are used to cool down the coolant in the radiator when the motorcycle is stand still and the coolant temperature exceeds. Improper functioning of the fan leads to consequences.
    Coolant leak: Make sure the coolant level is correct at all times. If the level of coolant is below the recommended level, immediately top it up by adding distilled water to avoid heating problems. Fix the leak, if any and continue riding.
    Riding at high speeds for a long time: Riding at high speeds for a long time means keeping the engine revving high. Revving the engine high for a long time will keep the pistons moving and the combustion of fuel takes place without a break. Its best to stop the engine and let it cool for about 10-15 minutes and carry on while taking break intervals thereafter.
    #EngineOverheating #Motorcycle #Safety
    Join my channel and become a member : / @mechanicaltechhindi
    The wait is finally over. I am here with UA-cam's very first Automobile & Mechanical Engineering Channel in HINDI.
    In this channel i will upload videos related to automobile and mechanical engineering topics such as engine, I C engine, Cars, Motorcycles, Production, HMT, Thermodynamics, FM, CAD/CAM etc.
    So subscribe my channel and learn everyday
    Follow me on twitter: ⤵
    / dashingdanish11
    Add me on Facebook: ⤵
    / danish.ali.754
    Follow channel on Instagram: ⤵ / mechanicaltechhindi
    Contact me: ⤵
    mechanicaltechhindi@gmail.com

КОМЕНТАРІ • 829

  • @prashantchitre9355
    @prashantchitre9355 4 роки тому +42

    सर उत्तम जानकारी 🙏🏻 १ ख़राब पेट्रोल २ टायर प्रेशर कम होना ३ ब्रेक फ़्री प्ले कम होना भी इंजन ओवरहीटिंग कारण हो सकता है

    • @sanjaychakrawarti73
      @sanjaychakrawarti73 Рік тому

      गुरुदेव आपके द्वारा जो जानकारी दी गई है कि वह आउटपुट प्रोब्लम है और महोदय जी के द्वारा बताई गई जानकारी इंटरनल प्रोब्लम है।
      आप दोनों के द्वारा बताई गई जानकारी बहुत ही अच्छी है और उससे ज्यादा यह दोनों समस्या मकैनिक पर निर्भर करता है।
      धन्यवाद!

    • @kisandeykisandey7274
      @kisandeykisandey7274 Рік тому

      Koie mat kored na Honda chor company ha enjen over hitng proplm kobe thik nihe hoga

  • @arizakram6517
    @arizakram6517 2 роки тому +11

    i feel another possible reason behind engine being over-heated is riding your bike roughly in a careless manner with the frequent variation in speed and acceleration.

  • @Rajatkumar-tp3rg
    @Rajatkumar-tp3rg 4 роки тому +4

    Is tarah ka video plz banate rahe sir... vehicle problems and their solutions...plz sir...isse naye students ko bohot help milegi

  • @akhilesh.ad1399
    @akhilesh.ad1399 4 роки тому +8

    10000%%%% CORRECT
    V YSEFULL POINTS YOU COVERD

  • @vinodbhatt5572
    @vinodbhatt5572 4 роки тому +9

    Sir you are right, but as per my knowledge oil need to be completely changed, after some km riding of the byke, oil looses its ability to absorb heat from the engine and reject to the atmosphere so oil needs to be completely changed.

  • @secure1237
    @secure1237 4 роки тому +17

    You're a gift to everyone you meet. Motivated and hardworking.

  • @RizwanKhan-wf5oy
    @RizwanKhan-wf5oy 4 роки тому +2

    Thanks ❤❤❤

  • @jamesdebbarma3036
    @jamesdebbarma3036 4 роки тому +6

    thankou for information sir

  • @mhatretech3536
    @mhatretech3536 3 роки тому +9

    Another reason for the engine to overheat is that if you set the taapet clearance setting properly, the engine will run very smoothly.

  • @subashchhetri2529
    @subashchhetri2529 4 роки тому +17

    Carburetor setting vid pls😁

  • @nirajraj2273
    @nirajraj2273 4 роки тому +2

    Bahut hi achchha laga video sir ji bus aesa hi video banate rhe

  • @krishankant7556
    @krishankant7556 3 роки тому +2

    Good information

  • @niteshkumar2116
    @niteshkumar2116 Рік тому +2

    Thanku sir for your information 🙂👍

  • @biswajeetchoudhury191
    @biswajeetchoudhury191 11 місяців тому +1

    Bahut shandaar tarike se aap humko samjhadiye Thank you Sir

  • @zalavirendra7683
    @zalavirendra7683 3 роки тому

    thanks sire

  • @indranilsarkar6834
    @indranilsarkar6834 4 роки тому +18

    Sir your manner and technique of explanation shows your love for the subject and in depth knowledge. If I had got a teacher like you who calmly and patiently explained everything in a very simple manner I would have been a different person altogether and would have achieved great success in my life. Anyways lots of love to you 💖🙏🙏

  • @amitaman108
    @amitaman108 4 роки тому +1

    Your video and it's content is far better than thumbnail

  • @santoshchatterjee7761
    @santoshchatterjee7761 4 роки тому +4

    Nice sir

  • @suneelmaurya3119
    @suneelmaurya3119 3 роки тому +1

    Most important your information I like it

  • @PawanKumar-im1ru
    @PawanKumar-im1ru 4 роки тому +4

    Thank you sir... it's very helpful information.. it's because of your guidance and instructions I have driven my Activa 5g from Delhi to GORAKHPUR...approx 953km and my scooty is in good condition.. again.. Thank you so much :)

    • @MECHANICALTECHHINDI
      @MECHANICALTECHHINDI  4 роки тому

      U r most welcome 😊👍

    • @ganeshbharadwajshooter1913
      @ganeshbharadwajshooter1913 3 роки тому

      How many days u took? Fantastic job

    • @PawanKumar-im1ru
      @PawanKumar-im1ru 3 роки тому

      @@ganeshbharadwajshooter1913 bro..it took 28hrs... since it was new scooty..so I have to take breaks after 70-80km and the long halt was at Lucknow for 4hrs

  • @amitkumar-ue4bl
    @amitkumar-ue4bl 3 роки тому +2

    Plz share CC wise riding schedule

  • @raazivkr3086
    @raazivkr3086 2 місяці тому

    First time I searched.. I m facing nd finally I got right answer by A Right PersoN 🙏Thank you Sr..😊

  • @randomeditz2484
    @randomeditz2484 3 роки тому +1

    So much knowledge butt still people think mechanical engineering is not good

  • @middyaentertainment5766
    @middyaentertainment5766 4 роки тому +3

    Thanks DaDa
    Very Useful Video

  • @shameemfathima6735
    @shameemfathima6735 3 роки тому +3

    Very useful information
    Thank you Sir

  • @smishra8224
    @smishra8224 3 роки тому

    Thank sir

  • @sonaghosh7703
    @sonaghosh7703 3 роки тому +2

    Aap bole to...problm bilkul Solved👍

  • @sureshasuresha7422
    @sureshasuresha7422 3 роки тому

    Thanks sir

  • @bijendaryadavmp9739
    @bijendaryadavmp9739 4 роки тому +2

    You are right...
    Awesome ji

  • @jyotiprakashsingh9222
    @jyotiprakashsingh9222 4 роки тому +3

    Very nice knowledge

  • @vishalmanohare6966
    @vishalmanohare6966 3 роки тому

    Bahut achi jaankari

  • @eunlawon5290
    @eunlawon5290 4 роки тому +2

    Ek no. Information diya , bhai Saab. Bhot bhot dhanyawaad🙏 thank you very much. Aise hi Vidya badatein chale. 1 million subscribers aapke channel Ko.

  • @ayushkumarsingh6213
    @ayushkumarsingh6213 4 роки тому +6

    Your videos are very helpful for mechanical students.I have learnt a lot from you which I have not learn from my college also. you are doing a tremendous job for us who belong to a very poor class family.
    Thanks a lot Sir . god bless you always🙏🙏🙏

  • @NareshPatnaik369
    @NareshPatnaik369 3 роки тому +2

    Omg sir very nice knowlage thanks very helpful ❤️💕❤️💓💕

  • @SahilKumar-kk8gt
    @SahilKumar-kk8gt 3 роки тому +2

    Nyc knowledge bro

  • @Jitendrajksaini8190
    @Jitendrajksaini8190 3 роки тому +1

    Awesome 👍 sandaar 👌

  • @anilkumar.r.toravi7830
    @anilkumar.r.toravi7830 4 роки тому +6

    Whether engine overheatng could be caused by thinning of oil density also?

  • @ajayuadhyay2595
    @ajayuadhyay2595 3 роки тому +3

    Very nice sir

  • @engineerirfan
    @engineerirfan 2 роки тому +2

    AWESOME VIDEO SIR 💜

  • @dukdahal
    @dukdahal 2 роки тому +1

    thanks a lot for information

  • @tkpcreation1318
    @tkpcreation1318 3 роки тому

    Maine jaisa socha tha jesa apply bhi karta hu bilkul sahi bataya appne
    Tysm

  • @Ashish98357428
    @Ashish98357428 3 роки тому

    Bahot jyada clutch lekrrr drive krna.Kya isse v engine prrr bad effect pdta hai.aur heating issue aata hai kya

  • @nadimsindhi997
    @nadimsindhi997 4 роки тому +3

    Best information

  • @sushamamadavi5395
    @sushamamadavi5395 3 роки тому +1

    Thanks 4 good knowledge

  • @adilabbachi1789
    @adilabbachi1789 3 роки тому

    Make a video about choke.

  • @nirabhmani9523
    @nirabhmani9523 Рік тому +1

    Can you please suggest possible reasons?

  • @mdsaidurrahmankhan6312
    @mdsaidurrahmankhan6312 4 роки тому

    Good explain

  • @sharma_80766
    @sharma_80766 3 роки тому +5

    I have a splendor+ bike , which has covered nearly 87000 KM and have show room look , I follow all those rules which u discuss , thanks for giving these tips .

  • @thememes8223
    @thememes8223 4 роки тому +4

    Very good information bro 👍🏽🤟

  • @satyajitrout8616
    @satyajitrout8616 4 роки тому +1

    Hello Brother. Good evening. Mujhe ye Janna hai Ki pulsar 150, pulsar 220 f buy karna Achha rahega Ki nahin. Because some people says that pulsar bikes are not good. I have no idea about bike. Please help me with honest suggestions.

    • @biswajit1193
      @biswajit1193 Рік тому

      Tvs raider la lo bhi sasta ho aur acha bhi ha

  • @babybarman9951
    @babybarman9951 Рік тому +1

    Thank you sir.

  • @abdulhafeeshah9786
    @abdulhafeeshah9786 3 роки тому +2

    Best advice

  • @madhusudansharma7368
    @madhusudansharma7368 3 роки тому

    Jabardast vedio suggest best engine oil for Passion pro

  • @satishvasane6812
    @satishvasane6812 4 роки тому

    बहुत अच्छा भाईसाहब धन्यवाद

  • @dayalankp9442
    @dayalankp9442 4 роки тому

    sr very useful vedio thanks

  • @balsonnaoshekpam6240
    @balsonnaoshekpam6240 2 роки тому +1

    Thanks for the Video

  • @vijaybhatt9638
    @vijaybhatt9638 4 роки тому +1

    Jabardast information about engine heating 👌👌👌

  • @vikashKumar-tp4me
    @vikashKumar-tp4me 4 роки тому +3

    Nice video

  • @KiranPatel-ef3gh
    @KiranPatel-ef3gh 3 роки тому +1

    Wow superb information thank you Sir...

  • @anjanisharma3964
    @anjanisharma3964 3 роки тому +3

    Nice explation ❤️❤️❤️❤️❤️❤️

  • @gammyammy5978
    @gammyammy5978 4 роки тому +5

    Sir please make video of mud clean in engine down

  • @techajeetofficial
    @techajeetofficial 4 роки тому +2

    Really apki video kafi useful hoti h

  • @gauravverma8150
    @gauravverma8150 3 роки тому

    Sir maine new hf delux bs6 li hai 1 mahina hi hua hai par overheat ho rhi hai or smell bhi aati jai rubber jalne ki kya dikkat ho sakti hai pls reply kare mujhe tension ho rhi hai kahi engine mein problem to nhi ya new bike overheat karti hai starting mein

  • @ZakirHussain-tk8jy
    @ZakirHussain-tk8jy 2 роки тому

    Sir bahut achi jankari hai apki

  • @sunildon6981
    @sunildon6981 3 роки тому +2

    You are bike guru keep it up

  • @bhargavbhat9380
    @bhargavbhat9380 3 роки тому +2

    sir kya car ka coolnet per also distilled water use karna chahiye?

  • @durgeshthakre7993
    @durgeshthakre7993 4 роки тому +2

    Very nice video sir

  • @ashutiwari940
    @ashutiwari940 4 роки тому +3

    Nice knowledge diliverd by u danish Bhai😊😊😊🙃🙃🙃🙃

  • @inspireandwealth.2870
    @inspireandwealth.2870 3 роки тому +3

    Hi sir
    Xtrem 160R ka engine long ride ke liye thik hai kya
    163cc aur air cooling engine hai

  • @thegame3265
    @thegame3265 3 роки тому

    Nice information..., dear have u any Yamaha rx 100...old one..

  • @sanidash6302
    @sanidash6302 3 роки тому +8

    Air fuels mixer tight karne se v engine heat hoti hai isliye tight na kare or timely oil change kare.

    • @Girja_Shankar
      @Girja_Shankar 2 роки тому

      Missing problem bhi ho rha h sayd essi ke chakker me

    • @vickee86
      @vickee86 2 роки тому

      Good

  • @RaviRavi-gm7mi
    @RaviRavi-gm7mi 3 роки тому +1

    Give tips for change Tyre. how many km Tyre change?

  • @saritaDevi-pp2bu
    @saritaDevi-pp2bu 3 роки тому

    Thanks sir ji

  • @shreemusicalsl3474
    @shreemusicalsl3474 4 роки тому

    Craboreter settings bataeya naa bro plz plz

  • @mufaddalmerchant8868
    @mufaddalmerchant8868 4 роки тому

    Give tips of Activa maintenance.

  • @dayanandprabhu7153
    @dayanandprabhu7153 4 роки тому

    बहुत ही बडीया इन्फॉर्मेशन दि धन्यवाद मेरे दोस्त

  • @shivanshuprajapati5864
    @shivanshuprajapati5864 4 роки тому +3

    नमस्ते गुरुदेव
    गुरुदेव आप तो पूरे यूट्यूब पर छा गए हैं l
    अब तो यूट्यूब पर आपके विडियो के सिवा कोई वीडियो देखने का इच्छा नहीं होती है l
    love you my dear sir
    गुरुदेव बहुत ही शानदार आपका चैनल है
    गुरुदेव आपकी मुस्कान बहुत प्यारी है
    और आपके वीडियो के बारे में क्या कहे गुरु देव आपका विडियो तो you tube top thanks Gurudev ji

  • @rajeshvispute1884
    @rajeshvispute1884 3 роки тому +1

    Great information sir, thanks 🙏🙏

  • @jagdishgohel6115
    @jagdishgohel6115 Рік тому +1

    Thank you 🙏

  • @hasmukhbutani1131
    @hasmukhbutani1131 3 роки тому

    Bahot badhiya bhaiji

  • @jor_dj3522
    @jor_dj3522 3 роки тому +4

    With so many risk its best to use public transport🤣
    Less pollution#less risk🥳👍

    • @speedawayyspeed9736
      @speedawayyspeed9736 3 роки тому

      Public transport is very boring and don't understand how ppl use it I feel very boring by going that city bus which is filled with crowds. car and bike best

  • @abhishekbonia1678
    @abhishekbonia1678 4 роки тому +1

    Sir break oil ke bare me eek vedio uplod kree please

  • @chaitanparamanik5059
    @chaitanparamanik5059 2 роки тому +1

    Good

  • @ashoksoni5045
    @ashoksoni5045 3 роки тому +2

    Best

  • @ramavatarkachchhawa1637
    @ramavatarkachchhawa1637 3 роки тому +2

    Thanks sar

  • @ShubhamSharma-cn6db
    @ShubhamSharma-cn6db 3 роки тому

    Thank you sir very informative video
    Kya aapki bhi workshop h

  • @surajfreedish9777
    @surajfreedish9777 3 роки тому

    Nice information सर thanks

  • @munawarhusainmulla5219
    @munawarhusainmulla5219 3 роки тому +1

    Very informative video 👍

  • @pravinrasamwar6008
    @pravinrasamwar6008 4 роки тому +1

    My bike recommendation 10w30, but itll cause many problems. So i top up 20w40. Then getting smooth riding. Will it ok?

  • @jagdishparmar7447
    @jagdishparmar7447 4 роки тому

    Sir plz help mere pass krizma r modal hai shubah shubah stat problem hoti kya katu

  • @amitaman108
    @amitaman108 4 роки тому +2

    Most of the time I miss your video because of thumbnail
    But I see by searching your channel

  • @junaksutradhar5531
    @junaksutradhar5531 4 роки тому +2

    Respected Sir, why the CDI coil is getting extra hot

  • @VishwajiTVermA-yo6ip
    @VishwajiTVermA-yo6ip 4 роки тому +2

    Nice video sir mere costume ka ye problem that

  • @AshiqurRahman
    @AshiqurRahman Рік тому

    what if I pour engine oil more than necessary. how to reduce engine oil?

  • @GNM560
    @GNM560 4 роки тому +2

    I have 2 bikes one bike 5 years old second bike 18months old
    I service very 2000km

  • @uvkvk
    @uvkvk 4 роки тому +2

    Hi
    Very good and genuine knowledge shared by you.
    I recommend your channel .
    Can you please tell me At what RPM, gears should be changed during up shifting and down shifting..? And does RPM increases with increase in speed?
    I have Yamaha MT15 bike.

  • @somthingnew9506
    @somthingnew9506 3 роки тому

    Sir bajaj k engine me heating problem 180 220 me bahut hai .. kya bajaj k engine o honda yamaha ki tulna me kharab hote hain ,, bajaj k engine 2 3 years me baith se jate hain kyu . Jabki or company k purane hote hain to or acche hote jate hain esa lagta hai

  • @onlinehelpwithindra1913
    @onlinehelpwithindra1913 4 роки тому

    Thank usable video

  • @amartayade2525
    @amartayade2525 4 роки тому +1

    Very good & useful information.

  • @balabhadrasing9976
    @balabhadrasing9976 3 роки тому

    Bahar achha sir. Thank 🙏you