Tearing Down our First Engine Build! 350 Vortec to Chevy 383 Stroker - feat. 1999 Chevy Suburban
Вставка
- Опубліковано 28 сер 2024
- Phil tears down the first engine we built that was originally pulled from the 1990 Chevrolet Suburban. Crank had lots of excessive play, which we deemed most likely caused by not correctly getting the spacing between the flex plate and torque converter correct during installing the transmission. But you live and you learn! It’s going to be rebuilt bigger and better next time.
BUY THE THINGS
---------------------------------------------------
Pig MAT Premium Absorbent Mat Pads: amzn.to/3uyIRzD
COMP Cams 7608-16 Magnum 7.200" Long, .080" Wall, 5/16" Diameter Pushrod Set: amzn.to/3yVjPhQ
COMP Cams 4758-2 Checking Springs: amzn.to/3p7eOhq
COMP Cams 7702-1 Hi-Tech Pushrod Length Checker 6.800" to 7.800" Length: amzn.to/3vQM9zC
COMP Cams 1618-16 - COMP Cams Ultra Pro Magnum Rocker Arms: www.summitraci...
LINKED VIDEOS
---------------------------------------------------
How to Replace a One Piece Rear Main Seal on a 350 Chevy (1987+): • How to Replace a One P...
Oil Pressure Was 100+ PSI! - Replacing High Pressure Pump w/ Standard Pressure in our 1999 Suburban: • Oil Pressure Was 100+ ...
FOLLOW OUR SOCIAL MEDIA
---------------------------------------------------
Discord: / discord
Reddit: / verygoodgarage
Facebook: / verygoodgarage
Instagram: / verygoodgarage
Brian’s Instagram: / brianleishman
Phil’s Instagram: / simplylong
CHECK OUT OUR WEBSITE
---------------------------------------------------
garage.gg
One day there will be cool things like merch and stuff. Or maybe this description is old and it's there now!
I'm so impressed!! You are working at such an advanced level!! Keep it up VGG!
We're actually quite surprised this thing ran as well as it was running. The crank play was obviously destroying starters, but other than that it was running like a champ!
Was it a 4 bolt main?
It is not, just a two bolt main
That's crazy it was running.
I know why your roller cam has play in it, it's missing the cam plate that holds the cam into the block behind the timing gear.
That play in the crank would that cause a serpentine/pulley to slap/tick on a 350 vortec? I’m planning to replace my harmonic balancer but my truck is at 268k miles and still purrs. Just didn’t wanna go through with it if I just need to go ahead and do a full engine rebuild lol
what year was that 350 vortec? if you remember? i have a 97 lookn to do 383
trying to find correct crank etc.
A blue car sent me here 😂
Was there metal in the oil
A bit, yes, little shavings
@@VeryGoodGarage or was it bearing material light copper like
Bearing material
@@VeryGoodGarage mine looks like a copper look could that be the thrust bearing
Daddy