Well, been there done that. Loved shovelheads. Outside oil lines to the top end (since 1962) electric start primary covers with no leaks. I bought new engines back in 1968 for $640 from Neidengards Harly dealership. and a spare front cylinder head for $103. Lift off the rear rocker box, turn the jug 180 degrees with push rod clearance notches in the fins, drop on a front head and bolt the rear rocker box back on. Results were the same exact cylinder ports on both cylinders, two tillotsen carburetors, one per side, jetted for a sportster engine and pointing straight at the intake valve. The rocker box fifth bolt got a brace down th the cylinder base bolt. After the first one it was a 3-1/2 hour job total. wizzardworks george
I've owned a couple of S&S Engines and work on them occasionally, they are top notch! I really enjoyed this series, alot of hands on bike building without all the scripted drama!
I actually had a 113 ci s@s in my fxrs. Itd shut off for no reason at all. In the middle of. riding. Its like wtf???? Did l hit kill switch. Minutes later itd start up and go. Three HD dealers couldnt figure problem out. Dealer l bought from gave me choice of softail or dyna in across the table trade. Damn nice dealer.
thanks ....glad you enjoyed it... it was a blast to produce..... couldn't agree with more on the HD unfortunately this was the last project we did on standard def.... it looked good then...LOL.... haven't had much success with uprezzing ...really appreciate the comment
In an Einstein moment I was looking at my frame jig in 1968 and realized I could bolt tall steel blocks with countersinked allen bolts under the the four pairs of bolt bosses and build the cradle out of 1/8 sheat metal with a peak on the bottom and a sloped down top on the right side. The undertranny area was extended back and morphed into a castle fender shape. Held five quarts and vented thru the downtube up to the neck for bearing lubrication on the steering head. A stepped down seating area with a looks like an oil tank off a sportster but actually a battery box for the huge ugly electric start battery. The key switch and ignition capacitors went in there too. All the wireing for 2 dozen one off bikes went thru steel breke line/hydraulic pilot line tubing put in as the frame tubing was assenbled. No sharp edges to damage wireing with the steel conduit and really easy to fish wires thru. The follow on bike had the bearing mounts for the jackshaft on the sculpted frame oil box with the swingarm bearings on the same shaft and a horizontal sporty rear coilover just above the transmission cover, an area cleared out by having a two front head shovel top end. Bike seven with an inner fender liner on the rear fender for the oil tank got hot as a deep frier. Replaced that with a 3" pipe tank spaced out and inline with the single front down tube. Ugly it was. Bike 3 was a handshift on a rachet top transmision cover. The lever was a Hurst flat handle and Hurst T- handle shift knob. The bottom end was blended in with a welder polished and rechromes. Excuse me that was bike 2 with a sideshift transmission top. Anyway A LOT of people wanted to know where I got it and I referred them to a speed shop on Pa run by a guy I didn't like. He eventually figured it out and did some threatening phone calls. I put a picture of it and his contact imformation at a few swap meets. Bike 27 was a nosecone (alternator) motor. Never liked the look of it and quit building at about age 37. Been thinking about doing a Kawasaki Vulcan 2000cc when I turn 80. Lot of new ideas thought up over the years. Still riding a stock Kaw for transportation.
loved the brotherhood when everybody was tradin parts , hit swap meets , carrying one side of your saddlebag with parts you MIGHT need , the other side with tools ta put em on with .......back in 73 gas shortage seen many a scoot with some kinda extra tank strapped to tall sissy bars with extra gas !! Now is good , just in a different way ( to many tryin to be like what they see on television not even close to being able to keep a scooter in the wind ) . Least they ride.
the shovelhead design is the apex of the V TWIN, the evolution was not a step forward ,just a compromise,when they drag race this bike they always use a shovelhead design,i guess they got tired of scattering parts
I was thinking the same thing and he should have been disqualified for not being able to start his own bike and in my opinion didn't deserve to be there. I have a lot respect for the rest of the builder's though
you know you're right. I pulled those out of the vault and completely Fckd up. There's a part 2 to the finale that didn't get loaded. I'm on the hunt for it and will rectify the situation. THANKS for bringing that to my attention and sorry for the let down. peace
What the hell is the deal with burning out a tire?? I just never understood this. YEAH... lets throw our money down the drain and ruin a tire!! I mean if you got money to burn... but even at that... I still don't see what's so cool about ruining a tire.
Proud employee of S&S and a honor to be a part of a legacy of gods of speed and thunder!!!
Well, been there done that. Loved shovelheads. Outside oil lines to the top
end (since 1962) electric start primary covers with no leaks. I bought new
engines back in 1968 for $640 from Neidengards Harly dealership. and a spare
front cylinder head for $103. Lift off the rear rocker box, turn the jug 180 degrees
with push rod clearance notches in the fins, drop on a front head and bolt the
rear rocker box back on. Results were the same exact cylinder ports on both
cylinders, two tillotsen carburetors, one per side, jetted for a sportster engine
and pointing straight at the intake valve. The rocker box fifth bolt got a brace
down th the cylinder base bolt. After the first one it was a 3-1/2 hour job total.
wizzardworks george
I've owned a couple of S&S Engines and work on them occasionally, they are top notch! I really enjoyed this series, alot of hands on bike building without all the scripted drama!
A trick : you can watch movies at Flixzone. Been using them for watching loads of movies recently.
@Harley Creed definitely, I have been watching on Flixzone for since november myself =)
@Harley Creed yup, I've been watching on Flixzone for since december myself =)
I Love Paul And Chica's Bikes OLD SCHOOL FOREVER!!!
Always hilarious watching the little fellas trying to kick start a large displacement engine.
I live in Bend Oregon and BIG MIKES was known as BOLT ON MIKE...
when my 1971 FLH motor died I installed a nice 80 cubic inch S&S motor. Thats all I need Im not trying to run fast with my old drum brakes!
Awesomeness 👌👏 thank's 4 the post my man🤘🙏
All these pro builders did a amazing job and that S&S Shovelhead AWESOME
Chica's rock-a-billy DA & old school bike arrived in a time-machine from 1958.
got a 99 ground pound with an S&S 113.........love the shit out of it,,,,
I actually had a 113 ci s@s in my fxrs. Itd shut off for no reason at all. In the middle of. riding. Its like wtf???? Did l hit kill switch. Minutes later itd start up and go. Three HD dealers couldnt figure problem out. Dealer l bought from gave me choice of softail or dyna in across the table trade. Damn nice dealer.
"Paul " now that was a F'N burn out that Even LARRY would've been proud!!!
thanks ....glad you enjoyed it... it was a blast to produce..... couldn't agree with more on the HD unfortunately this was the last project we did on standard def.... it looked good then...LOL.... haven't had much success with uprezzing ...really appreciate the comment
Bryan Lahr Good times.
+Bryan Lahr post this video for download?
Hey Bryan. I love your videos including the Gas-X one. By the way, who's the guy in the thumbnail of the video?
This show was great, what was the name of the theme song and who plays it
113 hard to beat slide me back in the saddle a few times
Music??
Indian Larry and chica are the only ones that built old school the other bikes are not old school
In an Einstein moment I was looking at my frame jig in 1968 and realized
I could bolt tall steel blocks with countersinked allen bolts under the the four pairs
of bolt bosses and build the cradle out of 1/8 sheat metal with a peak on
the bottom and a sloped down top on the right side. The undertranny area
was extended back and morphed into a castle fender shape. Held five
quarts and vented thru the downtube up to the neck for bearing lubrication
on the steering head. A stepped down seating area with a looks like an oil
tank off a sportster but actually a battery box for the huge ugly electric
start battery. The key switch and ignition capacitors went in there too. All the
wireing for 2 dozen one off bikes went thru steel breke line/hydraulic pilot line
tubing put in as the frame tubing was assenbled. No sharp edges to damage
wireing with the steel conduit and really easy to fish wires thru. The follow
on bike had the bearing mounts for the jackshaft on the sculpted frame oil box
with the swingarm bearings on the same shaft and a horizontal sporty rear
coilover just above the transmission cover, an area cleared out by having
a two front head shovel top end. Bike seven with an inner fender liner on
the rear fender for the oil tank got hot as a deep frier. Replaced that with a
3" pipe tank spaced out and inline with the single front down tube. Ugly it was.
Bike 3 was a handshift on a rachet top transmision cover. The lever was
a Hurst flat handle and Hurst T- handle shift knob. The bottom end was blended in
with a welder polished and rechromes. Excuse me that was bike 2 with a
sideshift transmission top. Anyway A LOT of people wanted to know where
I got it and I referred them to a speed shop on Pa run by a guy I didn't like.
He eventually figured it out and did some threatening phone calls. I put a picture
of it and his contact imformation at a few swap meets. Bike 27 was a nosecone
(alternator) motor. Never liked the look of it and quit building at about age 37.
Been thinking about doing a Kawasaki Vulcan 2000cc when I turn 80. Lot of
new ideas thought up over the years. Still riding a stock Kaw for transportation.
loved the brotherhood when everybody was tradin parts , hit swap meets , carrying one side of your saddlebag with parts you MIGHT need , the other side with tools ta put em on with .......back in 73 gas shortage seen many a scoot with some kinda extra tank strapped to tall sissy bars with extra gas !! Now is good , just in a different way ( to many tryin to be like what they see on television not even close to being able to keep a scooter in the wind ) . Least they ride.
Does anyone know what the price is on just one of those Motors? It cannot be cheap!!!
Just brought the likes up to 666
the shovelhead design is the apex of the V TWIN, the evolution was not a step forward ,just a compromise,when they drag race this bike they always use a shovelhead design,i guess they got tired of scattering parts
Chica is cool...
surfer dude needs a lot of help
Please what is name song into the video?
Rebuilding a revtech right now
What is rooke going to stop every 5 miles for gas
I love my S&S 113 but I would never try to kickstart my beast
All awesome bikes
Um do yo have anyone in your family called Larry Lahr?
live to ride .... ride to live !!!
Be interested to see how far Rookes bicycle inspired scoot goes on three tablespoons of gas. Rip
I was thinking the same thing.
I was thinking the same thing and he should have been disqualified for not being able to start his own bike and in my opinion didn't deserve to be there. I have a lot respect for the rest of the builder's though
indian larry 💎💎💎💎💎💎💎💎💎
WTF they hyped the drag race throughout the series and then they don't show it, lame.
you know you're right. I pulled those out of the vault and completely Fckd up. There's a part 2 to the finale that didn't get loaded. I'm on the hunt for it and will rectify the situation. THANKS for bringing that to my attention and sorry for the let down. peace
What the hell is the deal with burning out a tire?? I just never understood this. YEAH... lets throw our money down the drain and ruin a tire!! I mean if you got money to burn... but even at that... I still don't see what's so cool about ruining a tire.
A lot of lessons learned the hard way before you can do that
why do people burn out like that?
who the hell rides with shorts on......bicycle boys?
besides....where is Shinya???
Rooke could have thanked and shook other builders hand for starting his pos that he couldnt. Anyone else would have. Im kinda disappointed
in my opinion he didn't deserve to be there. he must have been a last minute replacement for someone who did
Do these guys know how to actually christ can even do burnouts
5 mechanics?? and cant made a HD or S&S running? gimme a break....soap show...sad.
y