Stair Renovation Project
Вставка
- Опубліковано 7 лют 2025
- This was my first time making a video and I learned quite a bit about the process. I used "crazy video maker 2" to edit the video segments. This program worked well enough and was free, but I didn't find out until I was all done that it will only export the video in 720p. If I wanted to export it in 1080p I'd have to pay for the full version, so I probably won't use this program again in the future. I also loathe the water mark placed in the bottom right of the video but I couldn't seem to remove it.
In this video I used Home Depot's Cap-A-Tread system for the treads. The white risers were purchased from Menards.
Amazon Affiliate links:
Dewalt Table Saw: amzn.to/32pdX17
Dewalt Miter Saw: amzn.to/3tweSsm
Dewalt Miter Saw Stand: amzn.to/3nPVLHX
Disclosure: As an Amazon Associate, I earn from qualifying purchases from the affiliate links above. There are no additional costs to the buyer.
Music: www.bensound.com
Never ceases to amaze me folks doing these DIY projects with no shoes or sandals on. Power tools, staples, hammers, etc and bare feet...go for it.
The guys that delivered my granite counter tops on Maui had just slippahs (flip flops) on.
Beautiful job. I didn't use caulk on mine either and the seams are nice and sharp (if not perfect). But they were so slippery that I added rubber matting on top. I didn't want to ruin the beauty but someone was going to slip fersure.
Nice project Johnny, your staircase looks great!
Thank you!
Beautiful. I enjoyed the vlog
Laminate stair treads with a bullnose require actual wood underneath the bullnose, or they'll just snap when someone puts too much weight on the tip. Some manufacture's claim you can do it without, but I'm absolutely not trusting 3/8" of laminate to hold anything.
AWESOME FRIGGIN JOB!!!💪
Love the stair well
Thanks!
Yes bro, the stairs look really beautiful but next time wear the safety shoes!!
Looks great. Nice work man
Super job! What material did you use for the risers and what was the thickness? Also, did you consider using caulk where the risers meet the side skirt?
Thanks! It's been a few years now. I believe the material is melamine and about 1/4 inch thick. I haven't done any caulking but that's a good idea.
@@renovateyourmind Lol, good memory! Thanks, I'm planning to do this exact project in my home, but I can't decide on a riser material. As for the caulk, your finished stairwell looks amazing, it's just as a DIYer crown molding dude, I'm a huge fan of caulk!
Awesome job!!! What’s the color on the tread and your laminate? Lovin that dark color scheme, my next go to for my home flooring project
Thanks! It is Stanhope Hickory from Home Depot
excuse all my questions and thanks for getting back, Im trying to learn from you. Did you buy new newel posts for the stairs and paint them? and for the laminate flooring I have the same landing about 16sq ft and I will be using the same laminate for the upstairs entry way, Do you recommend to do an under laminate or just the smoke barrier? and Also what paint did you use for the boards to touch up?
Ps. Im fixing up my stairs here in the next week when the treads come in after and after I paint the walls. Thanks for the video.
I did buy newel posts and painted them. It took several coats to get them where I wanted them. I also painted the new handrail. On the landing I used laminate floor with a vapor barrier underneath. I hope things go smoothly for you!
@@renovateyourmind thanks for your help this transformation will be epic.
The thing about table saws, they can grab the wood and throw it back at you. So you always want to keep all body parts, fingers included, on the feed in side. If you reach over the blade and the wood bucks back, you're gonna lose a finger.
Was it necessary to remove the nose from each stair?
Yeah. It's a pain to have to do the extra step (heh heh), but if you don't take it out then the riser won't be plumb and will be leaning out.
@@cameroniati2715 if I remember right there is a slot but in my case the nose was thicker than the slot, so I had to cut each one off.
Great video! How are the Cap-A-Tread's holding up? I've been looking at them buy they are getting mixed reviews. Thanks!
Mine have held up just fine. The laminate on the surface is still like new and all the treads are still secured in the same place as when I put them in.
Damn....GREAT JOB
what did you pay for all the tread caps?
They were about $50 per tread from Home Depot.
@@renovateyourmind hmmmmm ok nice
Kinda pricey i have like 30 😬🤑
$1500 ish just for caps
Standard screws for securing the stairs?
I used construction adhesive and a few brad nails. The brad nails were put in at the rear of the treads so the riser would cover them up.
And where did you get the balusters
Those are also from Menards.
Can you link a video to how you did the railing ?
Unfortunately I did the railing before I decided to start making videos. I'll bet you could find someone out there who has made a video though!
@@renovateyourmind thanks for getting back to me. I loved what you did with the entry way and stairs, and I decided to something similar and purchased treads but unfortunately the railing has smaller 25”-29” wooden balusters so I want to build a new railing. If you have any suggestions on where to get started that would be appreciated.
I could not find any iron balusters that were smaller than 40inch
@@georgew.1799 the balusters I bought were too long too and I had to cut them on the miter saw with a metal cutting blade. Takes time but is pretty simple to do aside from throwing sparks everywhere. Most of the railing is a math problem. Make sure balusters are plumb, spaced 4" apart, and the angle of the railing matches the angle of the stairs.
@@renovateyourmind thanks again
Where did you get the risers and did you need to paint or are they pre finished
Risers were from my local Menards. They were prefinished and did not need paint.
Perfect thank you sir