Ganto dapat mga lessons sa lahat ng magtetake ng IT at Cpe eh mga buong first year. Yung iba kase pahapyaw lang puro picture lang ahaha. Salamat sayo sir. 😁 keep it up. 😁
No matter what you do updates will get installed automatically and you will have the same issue again. Solution is if you have one graphic card that is bad replace it or if you have Intel and AMD both then you can either replace Amd or remove the Amd graphics coil from the motherboard.
Gpu can't be disabled. No matter what you do updates will get installed automatically and you will have the same problem again. Solution is if you have one graphic card that is bad replace it or if you have Intel and AMD both then you can either replace Amd or remove the amd graphics coil.
I did some cleaning of my msi gf63 thin gtx 1650 ti and no display same problem but after doing this reflowing it's working and I have made the gpu undervolt so it doesn't heat and is currently working fine hope this works
Ang objective po nito matunaw po ung soldering lead kasama ng flux dun sa ibabaw ng GPU? Naupuan po kasi ung laptop tpos wala na display check ko na din pati basic troubleshoot wala pa din display
With this fault will it give external vga out display? My dell laptop is black screen but gives external display, the lcd and lcd cable are definitely working
This is a temporary solution.Heating will make it work for some days and you will have the same problem again. For permanent solution is if you have one graphic card that is bad replace it or if you have Intel HD graphics and AMD both then you can either replace Amd or remove the Amd graphics coil from the motherboard.
So my laptop has a gtx 1060 giving me lines and colors the integrated one works if I do this will it fix it also do I have to use solder or csn I use just the flux? Please reply
hi bro, mi sister has an msi with gtx 1060 6gb and I have spent like a year and a half trying to install nvidia drivers. but nothing seems to work. I also try taking it to third party repair store, but never fixed. the integrated intel works just fine, do you think maybe nvidia is broken or need reflow process? There is a blue vertical line on one side of the screen.
Sir, yung sa akin po hp elitebook 8460p. Garbage display muna siya bago nag blackout. Wala na din ilaw lcd nya ngayon. May display sa external pero kapag mag install na ako driver nya mag blue screen tapos reboot. Black din kasi lcd nya sabi ng tech na pinagtanungan ko lcd daw problem? Totoo po ba?
Hi sir, may tanong lng po sana mapansin nyo. My brother tried the reflowing method on my laptop (had put a flux on the die as well as the soldering lead) but during the heating process..the flux spills out(like overflowed or dripping atop of the die) and we still continue the heating process..after a while we noticed that the green cover(IDK if it's called a substrate or something) just bloated like formed small bubbles after doing this method...my question is, is the chip can still work if the substrate/green cover is bloated? Thank you for the reply. :-)
kaya pa ba i fix ang gpu?..pag iniinstall ko kc drivers ng gpu nagblack screen after 5 mins..pag processor built in video card ok.nmn xa..pero pag may drivers na ng gpu black screen na..pahelp nmn if kaya pa ifix
Bro after i undervolted the laptop my laptop froze and it doesnt show anything i gave it to a repair shop they told me its graphic problem...so is this kind of repair they may approach..please reply bro...so i wana ask i had 2 3 games like wither 3 assassin creed odyssey..am i going to face any issues with those games after repairing...please reply brother... Its a request
Did your laptop got overheated? If not it could be Bios issue. Because you adjusted the voltage. The bios needs to be reset or reprogram first.. if same problem occur. Then the GPU chip needs to be reflowed.. and you can still play games fine
@@ChrisRandomTech it got heated...not overheated..i thought at first that its mihht be a bios problem..then i gave it to repair shop they told me after troubleshooting... This reflowing works in evry laptop ?
@@pranaypadhen6682 yes the problem here is caused by overheating. once the GPU or the Video Chip overheats. the solder under the chip melts. so in that case the connection to the board and to the GPU is now separated. so the solution here is you need to reheat again the Chip like the one i do in this video. so the solder lead will melt again to again connection to the chip and the motherboard. hope it helps
My laptop give me no display but i am not sure if is the gpu, i don't think is that bc i have imagine on my tv if i conect with an hdmi, what do you think, i need to change display? Or is the gpu the problem? The hdmi is conected to the gpu, I'm sure and doesn't detect the display of the laptop, that's all
I wanted to do it buy people are saying its risky uh can kill ur board i tired asking for technicians to solve my problem they said uh have to remove the card it cant be solved n when i said them to try reflow they said its risky i asked then how will uh remove the charge is is not risky he did not said anything can someone pleAse help meh
I have same issue like that, but when i try to change the lcd module ,. In this case i font know what name it is..( maybe LCD converter?) Then the problem gone
New subscriber po, nag kkaroon po kasi ng randomblackscreen yung amd gpu ng laptop ,nangyari lang po nung dinelete ko yung buong files gamit mismo yung app na pang amd, then pag install kopo ng mga laro nag bablackscreen na at may sounds lang, ano po kayang problem? (Nagagamit kopadin po yung laptop dahil sa intel na chip) pero sa amd nah loloko napo
Ganto dapat mga lessons sa lahat ng magtetake ng IT at Cpe eh mga buong first year. Yung iba kase pahapyaw lang puro picture lang ahaha. Salamat sayo sir. 😁 keep it up. 😁
Facing same issue. Technician said it can't be repaired.
But u had a process. Thanx. But seems not possible for me, expertise needed.
No matter what you do updates will get installed automatically and you will have the same issue again. Solution is if you have one graphic card that is bad replace it or if you have Intel and AMD both then you can either replace Amd or remove the Amd graphics coil from the motherboard.
@@techguy89 repaired by changing MB
@@nileshgoswami774 ok , Hope it will not go bad ever, Incase if it happens follow what i said. It will save you money. :)
@@techguy89You mean to remove the graphic processor right?
Remove AMD Graphics Coil @@indiboy7
I have to repair the same problem..
What is the cost and where is your Location ?❤
What if my graphic ic is short?
Will this solution work? Or I'll have to replace it
2 years later replace it
Sir, what if ganun pa din after following those steps. Nag okay po sya sa umpisa. Tapos balik ulit ang screen na distorted
pinaka maganda bunutin nlang para magamit laptop
same model po nandito sakin.. auto shutdown po pag startup sa windows... pero pag wala ang Hard disk.. di naman mag sa shutdown
This is only temporary fix. After couple of months it will fail again.
Did it twice to same laptop, which is now not working for same problem.. They should mount gpu the same way as cpu.
enough time to sell it to some poor bloke ;)
@@lordred7462 😂😂😂😂😂
You are right sir problem solved. Sir You mentioned in your comments reballing what is this?
reflowing
Sir tanungbko kng walang display yung laptop ko ..my power nmn...
Pero pag gena on ko uma andar yung fun pero nmmatay din yung fun 2 seconds...
reflowing gpu is only temporary fix. Permanent fix is to disable gpu entirely
Can confirm it doesnt work
Gpu can't be disabled. No matter what you do updates will get installed automatically and you will have the same problem again. Solution is if you have one graphic card that is bad replace it or if you have Intel and AMD both then you can either replace Amd or remove the amd graphics coil.
@@techguy89Am having Sony vaio VPCF22L1E and am facing that same problem 😖 its NVIDIA, intel core i5 can i switch it the way you are recommending ?
Can we use hair dryer instead of heat gun
Depends on the hair dryer you are using. Some hair dryer has a high heat settings.. as long as it can melt the soldering lead. Then you can use it
I have tge same problem my pc is working but no display its a gpu problem i can reflow it ? Without flux and heatgun ? My laptop is sony vaio model
Same problem
I did some cleaning of my msi gf63 thin gtx 1650 ti and no display same problem but after doing this reflowing it's working and I have made the gpu undervolt so it doesn't heat and is currently working fine hope this works
Ang objective po nito matunaw po ung soldering lead kasama ng flux dun sa ibabaw ng GPU? Naupuan po kasi ung laptop tpos wala na display check ko na din pati basic troubleshoot wala pa din display
With this fault will it give external vga out display? My dell laptop is black screen but gives external display, the lcd and lcd cable are definitely working
no. if the GPU is the issue. there will be no VGA external output
@@ChrisRandomTech what if it has integrated gpu then It will give Hdmi external output????
@@thewolf2824 If u have integrated yes
It's the same with my laptop. It only shows at vga output. It's possible that my lcd is faulty? It also beep 8 times at start up.
Same issue ng laptop ko sir hp pavillion entertainment dv2,asking sir kung magkano parepair sa inyo at location po,tnx
It’s worked with me thanks bro , but the problem are repeated again and again
Same here dude
This is a temporary solution.Heating will make it work for some days and you will have the same problem again. For permanent solution is if you have one graphic card that is bad replace it or if you have Intel HD graphics and AMD both then you can either replace Amd or remove the Amd graphics coil from the motherboard.
So my laptop has a gtx 1060 giving me lines and colors the integrated one works if I do this will it fix it also do I have to use solder or csn I use just the flux? Please reply
hi bro, mi sister has an msi with gtx 1060 6gb and I have spent like a year and a half trying to install nvidia drivers. but nothing seems to work. I also try taking it to third party repair store, but never fixed. the integrated intel works just fine, do you think maybe nvidia is broken or need reflow process? There is a blue vertical line on one side of the screen.
@@thewolf2824 gpus dead memory issue
@@Gothguitarist thanks bro.
@@thewolf2824 you may try a ebay repair service! Best if luck same issue gpu overheated sometimes they can reflow the chip
Meron ako ganito laptop model.same issue 2 board po gusto ko sana ipaayos hp dv6000 at dv6700
How to indentify the problm? For example, if one laptop have black screen , how i know is gpu ? I change rams , clean the slots, clean cpu ...
Sir, yung sa akin po hp elitebook 8460p. Garbage display muna siya bago nag blackout. Wala na din ilaw lcd nya ngayon. May display sa external pero kapag mag install na ako driver nya mag blue screen tapos reboot. Black din kasi lcd nya sabi ng tech na pinagtanungan ko lcd daw problem? Totoo po ba?
boss pano pag charging light blinking lang nangyayare hindi sya nagpopower on hp brand. bios battery wala na ako masukat na voltage. salamat boss
salamat sa pag share sir
How long is it work before it get fault again
it could be permanent depends on the condition of the solder ball.
No.. it is not permanent solution.. it's works 6 to 7 months only... I have done two time result is same after 6 months no pictures shown at all.
sir yung sa laptop ko.. pag sinaksak ku charjer iilaw pero ayaw mabuksan...... wala pong fan laptop ku
bro my laptoo has only integrated graphics, will it have the ssme chip?
yup its the same. you can reflow it
sir sakin dell inspiron 1440 white screen lang. pero meron output sa vga.
Pag po ba may mga lines na yung display ng laptop.3 vertical lines panel na po ba?
My AMD Gpu on my laptop is not working will it work if I do this?
laptop saved thanks bro
youre welcome bro 😁
Hi sir, may tanong lng po sana mapansin nyo. My brother tried the reflowing method on my laptop (had put a flux on the die as well as the soldering lead) but during the heating process..the flux spills out(like overflowed or dripping atop of the die) and we still continue the heating process..after a while we noticed that the green cover(IDK if it's called a substrate or something) just bloated like formed small bubbles after doing this method...my question is, is the chip can still work if the substrate/green cover is bloated? Thank you for the reply. :-)
kaya pa ba i fix ang gpu?..pag iniinstall ko kc drivers ng gpu nagblack screen after 5 mins..pag processor built in video card ok.nmn xa..pero pag may drivers na ng gpu black screen na..pahelp nmn if kaya pa ifix
Bro after i undervolted the laptop my laptop froze and it doesnt show anything i gave it to a repair shop they told me its graphic problem...so is this kind of repair they may approach..please reply bro...so i wana ask i had 2 3 games like wither 3 assassin creed odyssey..am i going to face any issues with those games after repairing...please reply brother...
Its a request
Did your laptop got overheated? If not it could be Bios issue. Because you adjusted the voltage. The bios needs to be reset or reprogram first.. if same problem occur. Then the GPU chip needs to be reflowed.. and you can still play games fine
@@ChrisRandomTech it got heated...not overheated..i thought at first that its mihht be a bios problem..then i gave it to repair shop they told me after troubleshooting...
This reflowing works in evry laptop ?
Ah yes. Your laptop needs to be reflowed. Yes all laptops can be reflowed because they all have the same lead solder balls underneath the GPU chip
@@ChrisRandomTech thanks brother....
@@ChrisRandomTech well the repiarman told me that he will reball it..is it safe...
Is it same as reflow
Boss san kayo located? mag papareflow din sana ko ganyan nangyari sa laptop ko..
Sir, I've been following ur videos, ung laptop q half of the screen ay flickered o malabo na..yong kabila nakikita pa..anu problema don?..salamat!
Pwede paayos ng laptop ko sir ganyan din yung problem, magkano at saan po location niyo thanks in advance
Liquid flux po b Yun or flux paste? Binibili nyo run po ba Yun?
liquid flux sir. ung kagaya ng ginagamit sa cellphone repair
ano po purpose po ng ginagawa niyo po? ba't po siya nag display after malagyan ng flux?
Bakit po sya nagiging gpu problem?
Sir yung 2 flex cable para saan?
ah pinang tape ko lng yan pra d gumalaw ung foil
what's the use of flux?..
Ye kiss reason k vajse hota hai and heat gun se kaise thik hota hai explain plz
english please?
@@ChrisRandomTech what is reason behind this problem
I m also facing same problem
@@pranaypadhen6682 yes the problem here is caused by overheating. once the GPU or the Video Chip overheats. the solder under the chip melts. so in that case the connection to the board and to the GPU is now separated. so the solution here is you need to reheat again the Chip like the one i do in this video. so the solder lead will melt again to again connection to the chip and the motherboard. hope it helps
Any permanent solution
Is this solution permanent/long run or is this just temporary?
Bro where can I get the flux thing bro, is there something else we can use?
Don't try repairs if u don't know and have solder flux.
@@tuxnoel yeah bro I got mine fixed from a professional
magkano singilan po ng ganyan bossing..?
My laptop give me no display but i am not sure if is the gpu, i don't think is that bc i have imagine on my tv if i conect with an hdmi, what do you think, i need to change display? Or is the gpu the problem?
The hdmi is conected to the gpu, I'm sure and doesn't detect the display of the laptop, that's all
Hello, did you find a solution or diagnostic for your issue?
Kuya, ask lang po. Bakit po ba nangyayari yan?
Nasosobrahan sa init po. Pwedeng barado na ang fan kaya nag ooverheat ang laptop.
Boss galing mo, san location mo?
I wanted to do it buy people are saying its risky uh can kill ur board i tired asking for technicians to solve my problem they said uh have to remove the card it cant be solved n when i said them to try reflow they said its risky i asked then how will uh remove the charge is is not risky he did not said anything can someone pleAse help meh
I have same issue like that, but when i try to change the lcd module ,. In this case i font know what name it is..( maybe LCD converter?) Then the problem gone
San po kau sa gentri.. Pagawa ko sana laptop ko.. Anu po ba facebook nyo
@@hyazenth_tv3680 can you speak english? You re from philipine right?
Master sana mareplyan mo.. naencounter mo na pagkaon mo ng laptop no display tapos deretso lang ikot ng fan nya..acer laptop pareho..
Ganto din po issue nung akin tumitigil po ba ung fan mga ilang seconds??acer din po
The GPU is still dead. This is a temporary fix.
Yes but sometimes it last for a long time. You should reball the GPU
sir pwede ba yung insenso na pang flux
Anu po facebook nyo.. Papagawa ko sana ung laptop ko. Tanza cavite lang po ako. Tnx
Thanks fro I will try
Ano po dapat temp ng heat gun? :D tnx
245°C to 260°C
@@ChrisRandomTech boss chris bkt? sabi ng iba 150'C pwd ba 150'?
Panu po pag walang flux
pede ba flux lang wala ng lead?
pwede naman po. pwede dapat ma tansya nyo sya. kaya ko lang ginamitan ng lead para malaman ko kung sakto na ang pagka init ko.
New subscriber po, nag kkaroon po kasi ng randomblackscreen yung amd gpu ng laptop ,nangyari lang po nung dinelete ko yung buong files gamit mismo yung app na pang amd, then pag install kopo ng mga laro nag bablackscreen na at may sounds lang, ano po kayang problem? (Nagagamit kopadin po yung laptop dahil sa intel na chip) pero sa amd nah loloko napo
Sir meron po ba kayong fb page?
I changed the thermal paste on my laptop in 5005u and integrated graphics and now there's no display in it.
Me too I replaced thermal paste on my dedicated gpu
Boss peqeust dell e6410 no power
Simply Dry Soldering ki hai ap ny... Lambi ki hai
Mga saan ba D2 sa bacoor teknisyan loptop mga bro
Sir why this problem occur
This problems occurs due to immense heat in graphic card.
saan po location nyu idol
Big help
Yahi kam kar ke bhai 4 mahine se chala raha hu aata fir chala jata hai