APC Smart UPS 1500 Lights Blink Problem Solution (Relay Fault) MODEL: SUA 1500I
Вставка
- Опубліковано 23 сер 2024
- APC Smart UPS 1500 Lights Blink Problem Solution (Relay Fault) MODEL: SUA 1500i
How to Calibrate APC UPS watch this Video: • APC 2.2Kva Smart UPS C...
Hello Mr. Apc fix I wanted to ask you this question since can I know the function of the variable found on the battery compartment of the sua 750i because I changed my the batteries to lithium ion so it’s normal lead acid battery is 27.3 volt and lithium ion 28.9 volt. Can it be the charging voltage variable? If no please tell what’s that.
Use Teraterm software for this purpose.
Hello, i have APC SmartUPS 1500 model DLA1500I and have same problem. When I take out motherboard I see 3 relays - one 6 pins - 450 2151A and two 8 pin relays - az 755 1c 24de. Should I change all 3 relays ? Please give your e-mail i will send you picture of motherboard. I cant find it in about section. Will be gratefull for your help.
nadeemsarwar733@gmail.com
Hi @Apc Fix, found your video looking for solution for my SMT750i. I have opposite problem actually, it faults with "Output over volt" error while a main line goes down (power is disconnected). I cannot find any service manual describing the problem. Can you maybe have some advice? Thanks in advance.
First of all, sorry for the late reply. I only make videos on the SUA series. I have no solution for this problem.
useful video
Thanks
Hello, Mr APC. My smartups has the same issue. I watched the video and saw that ralay has 6 pins, but the link you have supplied is for an eight pin relay, which one is the correct?
Sorry for any english mistake.
Some models use a 6-pin relay, and some models use an 8-pin relay. Both are correct, if your model use 6-pin relay then remove two pins from 8-pin relay.
For your kind help see these 2 photos in the given below link: drive.google.com/file/d/1kNR25gG1SG6I63OtqdbzBKzu3zUlGMJb/view?usp=drive_link
@@ApcFixthx for previous reply. One more question: you showed 2 types of relay, one with a single line and the other with a double line. Can I use either one? Or is there one of them that is correct?
@@danielpfmarinho Only use double points rely for light blink issue. Double point relay has different from single point relay in term of connection type.
I showed single point relay for information only.
can you give me link to buye it online
Link1:
www.indiamart.com/proddetail/omron-relay-g2rl-2-24vdc-8a-8pin-23187499648.html
Link2:
www.epal.pk/product/rp920124-6pin-relay-24v-coil-250v-ac-8a/
Link3:
www.ebay.com/itm/124458214274
Link4:
www.aliexpress.com/item/32845146188.html
Ya es ki jaga koi 24vdc 8a 8 pin laga sakty hai ?
No.
Hello sir. Can you tell me which relay for SU 1000i
The relay number for SU1000i is RP920124 6Pin Relay 24v Coil 250VAC 8A. Thanks for comment.
Relay 24vdc 16a 8pin hai ye lahore miljayege ?
Yes, Available in hall road.
Bhai pure sine wave?
Yes bro, All Apc UPS models are pure sine wave.
Hello APC fix actually can you help me by trying this task, Just try in pluging your apc calibrated ups of it then cold start it without it being plug to mains. Then tell me the output frequency whether it is 50 or 60hz.
Email me a picture of the front of the UPS.
Email given in about section.
@@ApcFix I din't see the email I'm a little bit far from it but it's SUA series 700va smart sine wave.
What I meant is that I just want to change it output permanently frequency to 50Hz so I can on it in 50Hz eve if there is not mains available.
Please read it carefully.
hi i use apc 1100 va does it output with two site not output with one site
?
What does it mean when all LEDs are flashing on the right side from the on/off button?
This issue happen due to AC output capacitor fault.
@@ApcFix you are right. I change the capcitor and now it works. Thank you
Hello Sir--Can you tell me relay number for APC(back-ups pro 1000) i will be thanks for you
Can you share the picture of the relay, and UPS on Email?
Email is given in about section.
@@ApcFix Thank you sir for your e-mail and for your support its same relay for 1500 aps ,,
@@Moroo1976 Yes, it's same as like 1500VA UPS
Shop bác ở đâu
ở lahore
Aoa bhai mere pass apc ups 1000 hai all lights blink karta hai jab power connect karta hun
Just replace the relay (24V 8A double point) the problem will be solved.
@@ApcFix thanks for rply but existing relays are 24v 16a single point . Can we use double point??
@@arbabali5472 If existing relay is single point then use single point relay.Thanks
this relay