They supposedly filed a intent for 'administration', which is basically reorg bankruptcy protection. Anything can happen still, so I am going to just put my build on hold for now and see what comes out of it.
@@MarvelPhx I really hope they are able to satisfy all outstanding obligations. The unfortunate reality, is that unless a very well established, and trusted 3rd party buys them out, I feel that it will be nearly impossible for them to keep enough of an income stream to make it happen. - I have always been extremely leery of these long term subscription models, as they put what I believe is an unacceptable level of risk on the customer. That said, I love the idea of being able to sell large, complex, and in many cases, amazing looking models to people who may otherwise be unable, or just unwilling to afford them; And no, I'm not sure of a better way to accomplish the goals of these kits. - I know I can get my wife to "buy in" to me spending $20 every few weeks with much less effort than asking to spend $2500 all at once...
@@mikethinks I feel there is still a ton of value in all of the design, supply chain, manufacturer deals, licensing, etc. that EM had in place. If one or more of the other partwork companies isn't already involved at this point, I would be very surprised. I imagine finishing the partwork subscriptions would be top on the list. They are a known income stream.
@@MarvelPhx Yeah same here, I’m still hoping someone will help them financially restructure and continue eventually… If not, I’ll probably turn mine into a Generations crash diorama or a spacedock construction diorama or something to that effect.
Very good for the comparison. When Eaglemoss sees this (and I'm sure they will) I hope the embarrassment will finally make them realize what a tremendous mistake they made in designing this model. Those of us who consider ourselves Trekkies were very excited when Eaglemoss released this model, but we never would have imagined how inaccurate it would be. It is unacceptable what they have done. I will never buy another partwork model from Eaglemoss. I must say that your work is inspiring. Thank you very much MarvelPhx.
To be fair, the stock model is not terrible. I just wanted to make it better and have it do more than just light up. If Eaglemoss had not released it in the first place, there would be nothing to build at all. I also wanted to try learning new things, such as Arduino, electronics, mobile apps, and sound effects.
@@MarvelPhx I agree with you that the model is not terrible and also that if Eaglemoss had not released it there would be nothing to build. In any case, a model of this size will be impressive in any collection. I refer to the expectations created by Eaglemoss with the promises made on their website selling the subscription and they still appear today, and I quote: “ CAREFULLY RESEARCHER. The model is based on a careful study of the original shooting models. The makers of STAR TREK: THE NEXT GENERATION actually used three different models of the Enterprise-D, all of which were subtly different. ILM built a six-foot version that could separate, and a less elaborate two-foot version that could be used for more distant shots In TNG's third season, the VFX team built a new four-foot version that was easier to use. Our model pulls elements from all three of the models and is designed to look as much like the onscreen version as possible.” “A CLOSER LOOK.. The model is a 27.5-inch die-cast replica of the Galaxy-class U.S.S. Enterprise NCC-1701-D. It is based on careful study of the different studio models that were used in filming, it is designed so the saucer and the stardrive section can separate, and it is packed with working lights. The exterior has all the details you’d expect, including phaser strips, transporter emitters, antimatter loading hatches, and the Captain’s yacht”. Are we really supposed to believe that they have made a “Carefully Researcher” based on the models used in the filming? The windows are bad. The navigation lights look like carnival lights, the warp nacelles are bad, no matter how hard one tries it is impossible to solve the light leaks, etc. Of course any model is improvable, but I feel let down by Eaglemoss for promising things and then not delivering. You can accept that a model has limitations, but don't tell me that it has been “Carefully Researcher”. Your work is inspiring and shows a possible way to improve the model and add things that make it "alive". But it is one thing to improve a model and another to fix the design flaws in the model. This is what has let me down with Eaglemoss. You are doing an awesome job with Enterprise and I am grateful to you for sharing it, showing the modeling community what is possible.
This is a fantastic comparrison of moded v stock - I dont really want to rewire it and mod it but Im trying to find a schematic diagram of the boards and wiring - any thought where I could get one I have asked tech support for help several times and it has not helped
Awesome job I'm still stuck on issue 12 I'm waiting for them to restock . right now I'm working on Enterprise e last week I started three UA-cam shorts on thinking about doing my own channel
I really love this community I really really do whether it's doing this Enterprise kit or just a regular plastic model kit I always have enjoyed it ever since my father got me into it
The bad lighting is why I stopped building mine. The thing that really pisses me off is Eaglemoss doesn't seem to care. When I talked to them about it. it just seemed to go into one ear and out the other. Now I have about a 3rd of the kit just sitting in a box collecting dust.
Hope round 2 Gives us the Enterprise D we deserve, of course youll have to paint and light it yourself but itll be accurate and so much better and CHEAPER. Eaglmoss did a Really BAD job on this, after i saw all the flaws of the shapes and so on i thought no, i wont spend so much on this
Now that Eaglemoss has gone bankrupt as of July 16, 2022 the stock unit may be able to be sold to someone needing the aprts to complete thier model to a higher stage. It might even be able to be used to model and manufacture 3Dprinted parts for those who need them.
Neither of them will be thrown away. I can store them until something comes out of the EM fiasco. I really believe we will be able to finish our models.
@@MarvelPhx I told youtuber OUTSIDER238 I wished he hadn't thrown his out I would've bought it I would build 1 without the lights just to have it to display
Beautiful lighting - looks true to the studio model and is not lit u like a Christmas tree
RIP Eaglemoss...feel bad for the any who are now absolutely screwed
They supposedly filed a intent for 'administration', which is basically reorg bankruptcy protection. Anything can happen still, so I am going to just put my build on hold for now and see what comes out of it.
@@MarvelPhx I really hope they are able to satisfy all outstanding obligations. The unfortunate reality, is that unless a very well established, and trusted 3rd party buys them out, I feel that it will be nearly impossible for them to keep enough of an income stream to make it happen.
-
I have always been extremely leery of these long term subscription models, as they put what I believe is an unacceptable level of risk on the customer. That said, I love the idea of being able to sell large, complex, and in many cases, amazing looking models to people who may otherwise be unable, or just unwilling to afford them; And no, I'm not sure of a better way to accomplish the goals of these kits.
-
I know I can get my wife to "buy in" to me spending $20 every few weeks with much less effort than asking to spend $2500 all at once...
@@mikethinks I feel there is still a ton of value in all of the design, supply chain, manufacturer deals, licensing, etc. that EM had in place. If one or more of the other partwork companies isn't already involved at this point, I would be very surprised. I imagine finishing the partwork subscriptions would be top on the list. They are a known income stream.
@@MarvelPhx Yeah same here, I’m still hoping someone will help them financially restructure and continue eventually… If not, I’ll probably turn mine into a Generations crash diorama or a spacedock construction diorama or something to that effect.
Why do you not have more likes?
This is wonderful!
Thanks for the feedback!
Very good for the comparison.
When Eaglemoss sees this (and I'm sure they will) I hope the embarrassment will finally make them realize what a tremendous mistake they made in designing this model.
Those of us who consider ourselves Trekkies were very excited when Eaglemoss released this model, but we never would have imagined how inaccurate it would be.
It is unacceptable what they have done.
I will never buy another partwork model from Eaglemoss.
I must say that your work is inspiring.
Thank you very much MarvelPhx.
To be fair, the stock model is not terrible. I just wanted to make it better and have it do more than just light up. If Eaglemoss had not released it in the first place, there would be nothing to build at all. I also wanted to try learning new things, such as Arduino, electronics, mobile apps, and sound effects.
@@MarvelPhx I agree with you that the model is not terrible and also that if Eaglemoss had not released it there would be nothing to build.
In any case, a model of this size will be impressive in any collection.
I refer to the expectations created by Eaglemoss with the promises made on their website selling the subscription and they still appear today, and I quote: “ CAREFULLY RESEARCHER. The model is based on a careful study of the original shooting models. The makers of STAR TREK: THE NEXT GENERATION actually used three different models of the Enterprise-D, all of which were subtly different. ILM built a six-foot version that could separate, and a less elaborate two-foot version that could be used for more distant shots In TNG's third season, the VFX team built a new four-foot version that was easier to use.
Our model pulls elements from all three of the models and is designed to look as much like the onscreen version as possible.”
“A CLOSER LOOK..
The model is a 27.5-inch die-cast replica of the Galaxy-class U.S.S. Enterprise NCC-1701-D. It is based on careful study of the different studio models that were used in filming, it is designed so the saucer and the stardrive section can separate, and it is packed with working lights. The exterior has all the details you’d expect, including phaser strips, transporter emitters, antimatter loading hatches, and the Captain’s yacht”.
Are we really supposed to believe that they have made a “Carefully Researcher” based on the models used in the filming?
The windows are bad. The navigation lights look like carnival lights, the warp nacelles are bad, no matter how hard one tries it is impossible to solve the light leaks, etc.
Of course any model is improvable, but I feel let down by Eaglemoss for promising things and then not delivering.
You can accept that a model has limitations, but don't tell me that it has been “Carefully Researcher”.
Your work is inspiring and shows a possible way to improve the model and add things that make it "alive".
But it is one thing to improve a model and another to fix the design flaws in the model. This is what has let me down with Eaglemoss.
You are doing an awesome job with Enterprise and I am grateful to you for sharing it, showing the modeling community what is possible.
I agree 100%. Eaglemoss has lost my business for sure.
This is a fantastic comparrison of moded v stock - I dont really want to rewire it and mod it but Im trying to find a schematic diagram of the boards and wiring - any thought where I could get one I have asked tech support for help several times and it has not helped
Awesome job I'm still stuck on issue 12 I'm waiting for them to restock . right now I'm working on Enterprise e last week I started three UA-cam shorts on thinking about doing my own channel
Do it! I never imagined I would want to be on a video, much less a stream. And here I am!
I really love this community I really really do whether it's doing this Enterprise kit or just a regular plastic model kit I always have enjoyed it ever since my father got me into it
The bad lighting is why I stopped building mine. The thing that really pisses me off is Eaglemoss doesn't seem to care. When I talked to them about it. it just seemed to go into one ear and out the other. Now I have about a 3rd of the kit just sitting in a box collecting dust.
On your stock Enterprise did you paint the bussard em field protector or is that a new stock part?
The stock build is using the replacement opaque part.
Nice. Waiting on new parts to ship so I can get started. Thanks! Can’t wait.
Would love to see a video about what Fanhome has changed with the reissue.
@waggenerct Fanhome didn't change anything, they picked up whatever EM left behind and finished the existing production.
How are you running the voice commands? That is so cool. I would love to do something like that with my 1/350 TOS Enterprise.
Using IFTTT connected to Alexa, she sends webhook commands to the Blynk API.
what a total misfire by Eaglemoss (yours looks "so much" better...)...you shouldn't have to modify a $2000 model...
Hope round 2 Gives us the Enterprise D we deserve, of course youll have to paint and light it yourself but itll be accurate and so much better and CHEAPER. Eaglmoss did a Really BAD job on this, after i saw all the flaws of the shapes and so on i thought no, i wont spend so much on this
PLEASE KEEP IT
don't throw it out
Now that Eaglemoss has gone bankrupt as of July 16, 2022 the stock unit may be able to be sold to someone needing the aprts to complete thier model to a higher stage. It might even be able to be used to model and manufacture 3Dprinted parts for those who need them.
Neither of them will be thrown away. I can store them until something comes out of the EM fiasco. I really believe we will be able to finish our models.
@@MarvelPhx
GOOD
I would love to own the
HUGE ENTERPRISE D
@@MarvelPhx
I told youtuber
OUTSIDER238
I wished he hadn't thrown
his out
I would've bought it
I would build 1 without the lights
just to have it to display