Traxxas Maxx vs Maxx Slash all around

Поділитися
Вставка
  • Опубліковано 11 вер 2024
  • VXL-6s Waterproof Electronic Speed Control
    6s LiPo compatible
    Integrated cooling fan
    Real-time telemetry via Traxxas Link
    3-LED status indicators
    Powered accessory ports
    10-gauge silicone wire
    Integrated protection circuits
    Velineon 2000 kV Brushless Motor
    4-pole 2000 kV
    5 mm output shaft
    Finned can for better heat dissipation
    Fixed-Mesh Motor Cradle
    Supports entire motor length
    Reduces flex for longer gear life
    70+ mph with Optional Gearing and Two 3s LiPo Batteries (sold separately)
    Traxxas Stability Management
    Improves straight line acceleration and braking on low-traction surfaces
    Never dulls throttle or slows the truck
    Adjusts from off to 100% assistance from the transmitter
    TQi 2.4 GHz High Output Radio System
    TQi 2-channel transmitter
    Traxxas Link enabled
    2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
    Automatically stores and loads settings for up to 30 Traxxas Link-enabled models-just switch on and drive, “model selection” is not required
    Programmable Multi-Function knob
    Adjustable steering and throttle percentage (dual rates)
    Adjustable steering and throttle sensitivity (exponential)
    Adjustable steering and throttle end points
    Clipless Body
    Quick and secure installation and removal
    Managed airflow for improved high-speed stability
    Rigid internal frame
    Additional nerf bar side support
    Eliminates body posts and clips
    Molded body reinforcements for tear-through protection
    Drivetrain
    Full-time shaft-driven 4-wheel drive
    Torque-Biasing Center Drive
    Absorbs shocks and distributes power
    Aluminum housing
    Sealed, silicone fluid-filled diffs with large module ring and pinion gears
    Steel pinion and spur gear
    Heavy-duty Cush Drive
    Steel-Core hybrid telescoping driveshafts
    Splined aluminum center driveshaft
    Modular Low-CG Composite Chassis
    Extended modular chassis design interlocks with front and rear bulkheads
    Absorbs and distributes impact energy
    Molded-in hex reinforcements on flat surfaces
    Easy to service and access components
    Driveline is sealed in the chassis to keep out dirt and grit
    Easy Battery Access
    Large battery compartment with secure snap-lock battery door
    Accepts single 6700 mAh 4-cell LiPo battery or dual 5000 mAh 3s LiPo batteries
    Batteries are protected deep in the chassis
    More secure than conventional retention systems
    Heavy-Duty Steering Bellcranks and Servo
    Large-scale high-output steering servo
    285 oz-in of torque
    0.18 sec transit speed
    Triangulated mounting system to fully support case
    Heavy-duty double-shear bellcranks
    Suspension
    Heavy duty double-shear suspension arms
    Tough composite formula resists impact damage, even in cold weather
    Engineered to optimize suspension travel and steering angles
    All critical suspension points have double shear strength
    Steel pivot balls
    C-hub and steering block geometry maximizes steering angle
    Fixed, high-strength camber and toe links
    Steel upper and lower tie bars
    GT-Maxx Shocks
    Machined aluminum threaded body
    Extra-large bore and capacity
    Large-diameter damper shaft
    Lower seal cartridge with dual X-rings
    Adjustable upper spring retainer
    Plastic shock caps with pivot balls
    Lower spring perches bolted on
    Bumpers
    Heavy duty energy absorbing front and rear bumpers
    Lower front and rear skids for impact and abrasion resistance
    Integrated nerf bars for side impact resistance
    Adjustable wheelie bar with integrated carry handle
    Wheels & Tires
    Tough dual-profile wheels with keyed 17 mm hex receptor
    Large 5.3″ Maxx SC belted tires
    Limits tire expansion for game-changing performance
    1-piece foam inserts
    Pre-glued and ready for action

КОМЕНТАРІ • 4