Thanks for the vid bro. I pick up some about 2 months ago. I switched the cutting blade with the slime line pro cutting blade but wasn’t able to switch the non cutting blade. They cut super close like that. But Is there a way you can show us/me how you we’re able to switch both blades. Thanks and we appreciate you.
There’s quite a detailed video with the blade swap but it’s in a foreign language I couldn’t understand but it’s still quite clear, you could also get the andis head for the cordless version, that guy also shows how to do it.
Can you please post a video on how you swapped blades pls. And you switched the original kemei 1971 blade to an Andis Slimline pro blade correct? Planning on buying this trimmer that's why
He uses the andis t outliner blade, it’s a bit of a squeeze but it fits and works well, there’s a vid of a guy that does a step by step on how to zero gap and swap the blades, with a separate video showing how the guy uses the cordless andis blade versions cam follower. It’s in a foreign language but it’s still very clear. If you have questions Let me know.
ua-cam.com/video/KUXMJH5M1SE/v-deo.html That’s the vid that uses the cordless head, watch the first one first because it shows you how to zero gap them.
Hey sorry only getting back to you! I have another vid coming this week of a fade tutorial but I will try describe in the next vid what I did with the head to get it working. I was even going to re buy the two and do a video from scratch.
Just brought mine. Thanks for the review, I've been looking for one for a month. Couldn't find a UK supplier until now. Don't think I will risk changing the head.
Yes , it is very easy to swap it. I did mine in under 5 min for the first time and it cuts like it is the andis slimline pro. I rocomand you to try , you will be surprised .
With this Andis Slimline Pro Blade mod, do the Kemei trimmer guards still fit?! I tried to do a similar blade modification following another UA-camr's tutorial before I found yours, and after cutting and glueing the original Kemei parts (so many steps - and destructive ones at that), the blade mod didn't even work AND ruined my original Kemei trimmer!! I am returning that blade and now am getting this one that you recommended! Thank you so, so very much for the review and tutorial!!! You certainly have well-earned a new subscriber 😉
Nice vid mate, i know this is only good for hair linning it does the job perfectly well but can you use it to cut the general hair or just go for the adjustable clippers and what clippers will you recommend for both cutting and linning.. Thanks in advance
insane broo you’re amazing barber and pro in modification without hardcore adjustment what andis blade did you use and any other blade recommendations other than andis
Is this modification possible with similar trimmers on Amazon for instance, or would you advice to just try this mod with the Kemei 1971’s? Thanks for the video too...clear communication and guidance throughout the last vid I watched. Keep going 👍
Definitely, it’s much easier to see in the mirror (even easier than the babyliss skeleton trimmer which I have as well) because it’s so skeletonized and slim as well
nice review man! they have a new one that's similar out now by a company named Gevey just bought it today from a local beauty supply store it looks almost identical but the blades are longer you should test it out....
I can't wait to receive my kemei trimmer so I can change the blade on it to Andi's slimline pro 👌 I'm just using the trimmer for beard line up. I hope it does a good job. It will be my first time ever using Andi's good video.
@Plapoytas Plapi You can adjust the blades to get zero gap and get very close cut, or mod it if thats not enough for you, but it might leave red spots on client if u not careful enough , without a mod it works great
Nice haircut I have those clippers but I prefer my corded clippers it just gives me more cutting power I see a lot of barbers with over 8 to 9 clippers truth be told all you need is 2 liners and 2 cutters
Joel Beckford hey man it’s the slimline pro head I used. I’m not sure if they’re the same as the t outline but I ordered the slimline here in Ireland to be safe. The blade comes with the spring and plastic mounting plate all intact and I took it apart and used the kemei mounting plate and put it on the andis cutting head then wedged the kemei spring on to keep all together and fitted that to the kemei body! There’s a lot of interest in a video so I’m going to re order the clippers and a new head and do a video when they arrive 👍🏼 lemme know if I can help with anything else
@@dbarbers5180 thanks for the help bro, I think I may have messed up the cam by shaving off those plastic bits.. Fingers crossed I can sort it with your info and some gorilla glue💀 I'll look out for the next vid! 👊🏾
I got them same clippers mine are just a different brand. I’ve only used mine once. I’m 🤔 🤔 I made a bad decision buying them even though I got them for a cheap good price.
would you sell one already swapped for a slight more price
Can you please do a video on how to mod these trimmers with andis t outliner blades thank u
I need some suggestions, which is better kemei 1971 or kemei 5027? Thanks mate!!!!
What’s the difference between the 1971 and the k9?
Great video 👌 could you do a tutorial on how to swap the blades. Cant seem to find a video for it.
Thanks for the vid bro. I pick up some about 2 months ago. I switched the cutting blade with the slime line pro cutting blade but wasn’t able to switch the non cutting blade. They cut super close like that. But Is there a way you can show us/me how you we’re able to switch both blades. Thanks and we appreciate you.
There’s quite a detailed video with the blade swap but it’s in a foreign language I couldn’t understand but it’s still quite clear, you could also get the andis head for the cordless version, that guy also shows how to do it.
Tarig Marzoug ok thanks. I’ll look it up.
ua-cam.com/video/VhVH_qHmhZ8/v-deo.html
There you go you’re welcome man
ua-cam.com/video/KUXMJH5M1SE/v-deo.html
This is the one where he uses the cordless cam follower.
what is the difference between the 1971 and the 1974 kemei model?
Is it designed to shave sensitive areas?
Hello, but does the razor shave to zero like the razor blade? Thank you.
thank you for the review. will wahl guide combs fit on this?
Can you please post a video on how you swapped blades pls. And you switched the original kemei 1971 blade to an Andis Slimline pro blade correct? Planning on buying this trimmer that's why
He uses the andis t outliner blade, it’s a bit of a squeeze but it fits and works well, there’s a vid of a guy that does a step by step on how to zero gap and swap the blades, with a separate video showing how the guy uses the cordless andis blade versions cam follower. It’s in a foreign language but it’s still very clear. If you have questions Let me know.
Sorry, D barbers uses a slimline head but I prefer the t outliner blade.
Here’s that vid I was talking about.
ua-cam.com/video/VhVH_qHmhZ8/v-deo.html
ua-cam.com/video/KUXMJH5M1SE/v-deo.html
That’s the vid that uses the cordless head, watch the first one first because it shows you how to zero gap them.
Thank u tarig help is appreciated, will try this mod already ordered :)
Hey sorry only getting back to you! I have another vid coming this week of a fade tutorial but I will try describe in the next vid what I did with the head to get it working. I was even going to re buy the two and do a video from scratch.
Where can you get the plastic thing that holds the blade so that it can be swapped with the andis blade ?
Just brought mine. Thanks for the review, I've been looking for one for a month. Couldn't find a UK supplier until now. Don't think I will risk changing the head.
Why not it's super easy and u will love it after that
Yes , it is very easy to swap it. I did mine in under 5 min for the first time and it cuts like it is the andis slimline pro. I rocomand you to try , you will be surprised .
They're light and convenient do a video how modified conversation The andis on it
Have u used VGR v-082 pro Li trimmer. Which is better can u plz suggest with original blades.
With this Andis Slimline Pro Blade mod, do the Kemei trimmer guards still fit?!
I tried to do a similar blade modification following another UA-camr's tutorial before I found yours, and after cutting and glueing the original Kemei parts (so many steps - and destructive ones at that), the blade mod didn't even work AND ruined my original Kemei trimmer!! I am returning that blade and now am getting this one that you recommended! Thank you so, so very much for the review and tutorial!!! You certainly have well-earned a new subscriber 😉
What about the african hair ?? Work fine with it no lag ????
Is it useful for facial hair??
I have bought the same can you tell me how you made it to zero mine does not cut like this
Nice vid mate, i know this is only good for hair linning it does the job perfectly well but can you use it to cut the general hair or just go for the adjustable clippers and what clippers will you recommend for both cutting and linning.. Thanks in advance
These are good for just detailing bro. Go with a wahl senior or magic clip, or stick with andis for the clippers, they are similar
insane broo you’re amazing barber and pro in modification without hardcore adjustment what andis blade did you use and any other blade recommendations other than andis
Sharafi Shaffiai thanks man! I used the slimline pro blade. I haven’t tried any other blade as the results with the Andis are savage
Is this modification possible with similar trimmers on Amazon for instance, or would you advice to just try this mod with the Kemei 1971’s?
Thanks for the video too...clear communication and guidance throughout the last vid I watched. Keep going 👍
Will it work for the vgr 082 ??
T outliner head?
Hey can you put the whal detailer blade on the kemei ?
Would be great if you could do your blade mod tutorial 👍🏼
Just up, check it out ua-cam.com/video/tqbxL96ESYw/v-deo.html
I Buy this Andis (04521) Replacement. It will work?
Just got one. Zero-gapped em myself but how durable are they?
Savage they’ve been banged around for months and still doing the best job!
@@dbarbers5180 Nice Thanks
Can you do a future video on modify the trimmer head
Walter Jones yep ordering bits to do so
Just up, check it out ua-cam.com/video/tqbxL96ESYw/v-deo.html
Would you recommend these for diy shape ups in between barber visits
Definitely, it’s much easier to see in the mirror (even easier than the babyliss skeleton trimmer which I have as well) because it’s so skeletonized and slim as well
For sure! For the price you can’t go wrong!
Where do I change the head from
nice review man! they have a new one that's similar out now by a company named Gevey just bought it today from a local beauty supply store it looks almost identical but the blades are longer you should test it out....
How much watt is it? Any info on the motor?
I can't wait to receive my kemei trimmer so I can change the blade on it to Andi's slimline pro 👌 I'm just using the trimmer for beard line up. I hope it does a good job. It will be my first time ever using Andi's
good video.
I just got mines and it won’t come on what should I try to do
Refund it
How i can find this shaving machine
Link in bio!
Is th andis head zero gapped?
Out of the pack they’re not but easy enough to do!
Show how to charge buhda t outliner portable trimers
Hey bro do that video!!! I want to stay in tune
I will man ordering the bits again to do in fresh video
ua-cam.com/video/tqbxL96ESYw/v-deo.html
What andis blades are these?
They’re off the slimline pro
Please can someone tell me, does Wahl Detailer cut MORE (to make head bald) or the Wahl Legend?
I prefer detailer instead balding clippers, using wahl balding sometimes snagging the skin, it hurts the client.
robawi diyar thank u. But does it cut more than the retailer? I ve heard its 0.01
@Plapoytas Plapi
You can adjust the blades to get zero gap and get very close cut, or mod it if thats not enough for you, but it might leave red spots on client if u not careful enough , without a mod it works great
robawi diyar thank u bro
Nice haircut I have those clippers but I prefer my corded clippers it just gives me more cutting power I see a lot of barbers with over 8 to 9 clippers truth be told all you need is 2 liners and 2 cutters
Yeah? Which ones king..I actually was in the process of buying these clippers.
why swap andis swap?
QUE ORIGEN ES LA MAQUINA?? ALGUIEN SABE??
JAPONESA, AMERICANA, ALEMANA. DE DONDE ES?
La maquina es de China. La navaja es Americana.
Good for 0 precision? As I shave my head every weekend!!!
Looks good for a bald head, wonder if its any good to fade in a beard?
Thank u gonna buy this now because of u!!
Amazing video. Thank you so much for doing this
I just got me a pair right out the box mine was super sharp a little too sharp cut me up a little but other than that I live em.
Can u do the swap video
Yep will be one of the next videos 👍🏼
Here it is bro ua-cam.com/video/tqbxL96ESYw/v-deo.html
Sure....show me how....because I wanna put an andis blade on mine
Just up, check it out ua-cam.com/video/tqbxL96ESYw/v-deo.html
Please I need a video on how to switch the blade
EdwardNMorrow it’s on my channel!
Do the tutorial video 👍🏽🙌🏽
Just up, check it out ua-cam.com/video/tqbxL96ESYw/v-deo.html
Hey bro....I just ordered some.....very informative review...💈
Mills The Barber haha yes my guy! Well worth it!
@@dbarbers5180 please create a mod video, I received mine today with andis t outliner blade but struggling to mode. Thanks pal
Joel Beckford hey man it’s the slimline pro head I used. I’m not sure if they’re the same as the t outline but I ordered the slimline here in Ireland to be safe. The blade comes with the spring and plastic mounting plate all intact and I took it apart and used the kemei mounting plate and put it on the andis cutting head then wedged the kemei spring on to keep all together and fitted that to the kemei body! There’s a lot of interest in a video so I’m going to re order the clippers and a new head and do a video when they arrive 👍🏼 lemme know if I can help with anything else
@@dbarbers5180 thanks for the help bro, I think I may have messed up the cam by shaving off those plastic bits.. Fingers crossed I can sort it with your info and some gorilla glue💀 I'll look out for the next vid! 👊🏾
Joel Beckford I’m getting one in the next few days if it doesn’t come I’m just gunna take it apart and explain as best as possible what I done 👍🏼
4 утра, а мне блин на триммеры хочется посмотреть, хренова бессонница
👍🏻👍🏻💖 thank you so much
I’d recommend modifying them for a GTX t outliner blade instead. Get a closer cut.
Is there a video showing how to swap it with GTX T outliner?
👍🏼👌 thank's bro
I still love the stock Slimline Pro Li. They are super cheap on Amazon.
Jazzbuh not in Ireland man! €130!
Great video
I got them same clippers mine are just a different brand. I’ve only used mine once. I’m 🤔 🤔 I made a bad decision buying them even though I got them for a cheap good price.
Why what the problem with this machine
I am your thousandth subscriber. You should gift me a custom zero gapped clipper 🤭
Nice video BTW
nice
Do the video please I want to put these babies to use😫
Saya sudah memiliki nya
Where are you come from?
Makininha top tenho uma
So basically those things are not worth shit?
😂😂😂
🇬🇧
Hey barber bro im doing a giveawy at 1k
India price. 750 only
Ugharoja Manish Like 10 dollars! Crazy
well it's no longer the KEMEI KM-1971
Purfecht.
I see low powerfull
Hey Brother i wish my would cut like that how did you do it