Cutting Giant Foam Board on X-Carve CNC Router for Xanders Project! - @Barnacules
Вставка
- Опубліковано 1 жов 2024
- Did you know I've made over 800+ other videos on UA-cam? Hit that SUBSCRIBE button and watch another Barnacules Nerdgasm video right after this one! 🍿 Using an Inventables X Carve for Cutting out Giant Foam Board Snowflake Christmas Decoration for my sons school project.
Purchase Carvey (Quiet, Small Build Volume)
bit.ly/BarnCarvey
Purchase X-Carve (Large, Loud, Huge Build Volume)
bit.ly/BarnXCarve
Design your own stuff with Easel (Software shown in video)
bit.ly/BarnEasel
Check out my viral "Making Fidget Spinners" carving video
• Making Custom Fidget S...
Come subscribe to my Twitch channel and see my daily streams! / barnacules
Purchase T-Shirt at end of video (and many others)
shop.barnnerd.com
Join me on social media, I'm very active
Twitter - / barnacules (Tag me @Barnacules)
Discord - bit.ly/BarnDis... (Join #general)
Instagram - / barnacules
Facebook - / barnaculesnerdgasm
Patreon - / barnacules
Work Area
500mm rails
X-axis: 250mm
Y-axis: 250mm
Z-axis: 65mm
750mm rails
X-axis: 500mm
Y-axis: 500mm
Z-axis: 65mm
1000mm rails
X-axis: 750mm
Y-axis: 750mm
Z-axis: 65mm
Machine Footprint
500mm rails
X-axis: 750mm
Y-axis: 500mm
Z-axis: 350mm
750mm rails
X-axis: 1000mm
Y-axis: 750mm
Z-axis: 350mm
1000mm rails
X-axis: 1250mm
Y-axis: 1000mm
Z-axis: 350mm
Accuracy
A properly tuned and calibrated machine should get to a resolution of ~0.075mm to 0.13mm.
Electronics
X-Controller with Grbl Installed (USB)
Input voltage: 115VAC or 230VAC (selectable)
Spindle
Model: DeWalt 611
Amps: 7.0Amps
Horsepower: 1-1/4HP
No load speed: 16,000-27,000rpm
Rapid rate
Recommended defaults:
X-axis: 8000 mm/min
Y-axis: 8000 mm/min
Z-axis: 500 mm/min
💥 See my Amazon Store for all the products I use & review 💥
www.amazon.com...
⭐ Protect your privacy & get 70% off Nord VPN 3 Year + Free Month
nordvpn.com/bar...
Use code 'Barnacules' at checkout
Last night my wife dropped a bomb on me that she needs a giant snowflake for a booth at my sons schools winter festival so kids could get pictures with it around their face. She said it had to be done very quickly and thought I still had the X-Carve so I could do it in the garage. Well, I had to head over to DarthTigger501's maker space since that is where my machine setup now and we had a blast cutting out this snowflake and it turned out amazing. My wife was MORE than a little happy. Hope you guys enjoy the video and me doing making projects again. Please slap a like on the video and hit subscribe and also comment down below, I'll be watching comments off and on.
your T-shirt is #LITTT
It sure is buddy!
Barnacules Nerdgasm the reason why it didnt cut all the way through the poster was because you had the clamps on one side which bent the board up, and the higher side was where you set your tool offset
That comment about the Lenovo seconded
Grats on the after dark fun time ;)
Wow... You are back to your normal self.... by the way, the final outcome is amazing besides all drama. Ha ha.. I enjoyed it Jerry.....
I like being different, this felt like my old self just doing different stuff and having a good time joking around. Haters have made me to serious and other tech tubers have made me try to be too professional and it doesn't fit well. I just need to the random camera slinging dude that primarily focuses on doing stuff I'm pasionate about and record it secondary.
2 new Barnacules videos in 2 days? Wow, did you take those "why do you need a 13k pc to render videos when you rarely upload" comments to heart?
I don't let negative comments drive me, the reason for more videos is just because of the situations.
I think it was my sexy beast comment on that video. Leave a comment wanting to see more of this sexy person and next day here it is.
Classic Barnacules content! I love it!
This was last minute, grab the camera as I ran out the door content. This is honestly what I'm good at, I need to stop with the professional shit, I'll leave that to the other kids.
It was a perfect compliment to my dinner, and the "ladies" jokes had me in stitches! Keep it up!
Very helpful! NICE VIDEO DUDE!!!!
You're very welcome!
Not sure about whether or not the x-carve bed was flat or not, I bet the reason it didn’t cut all the way through is because the poster board lifted on one side while the machine was cutting
That is what I thought as well, probably just warped from being stored upright for a while.
Yepp! Figured that wasn't your garage at the start! Too clean ;p
Great Video. Love your unique takes on these with the jokes and camera angles/sped up sections, makes it a fun watch. I know you spend a lot of time on twitch, but many of us just don't like watching that format. I hope you make more frequent videos here on youtube, really any kind of videos :)
For the ladies, he didn't had to adjust that caliper, 0.19 inch for both mesures...
Nope, made it nice and easy :D
*****positive guy comments*****
Quick! your live soon!! :)
my live soon what?
I like your shirt man. :)
The end result looked awesome. 😎
And stop making snowflakes!!! The world has enough!!! Oh - you're talking about actual... on foamboard... NEVERMIND!!!
Where do I sign up to officially become your friend Mr cules?
It's simple, you post a comment and I respond. See you on Morning Coffee tomorrow!
Always love watching your new videos no matter the topic
Loving the Stache Jerry! Now go buy yourself some Aviators to go with that you badass
Did the other "thing" you measured with the calipers also come out to .19"? Inquiring minds wanna know! NOT
I guess Xander is now a special snowflake
(Disclaimer: no hate, I really like jerry and his whole family, just wanted to make a joke! And im an autist too, so I got that xD)
Darthtigger501 is the best name ever wish I had thought of it...I’m too much of a dumb guy
Reported...
You need some weight down . Use 4 set of steel 1/2 inch thick 3”x 3 “ u can put it on that when it moves u can move steel to avoid hit and damage the bit ..to keep flat on table
$8.99 For a sheet of poster board. What a Fkin scam!! FYI you can usually get foamcore cheap af at dollar tree.
We got a special lil snowflake over here!
jk, nice to see you again.
Hey Guys whats Going Jerry were. Love the videos man. Send over your old Pc PLeaseeeeeeeeeeeeeeeeeeeeeeeeee
Wtf? The "cutting" part never happends in this video.. only a PC DIsplay the entire video
oh my fucking god i read this originally as “cutting giant snowflake for christmas pornography” kill me
10:38 I would like to see You both on Halloween candy hunt with theese:-)))))))
P.s. thanks
Large fidget spinner please👌👌👌👌
hey everyone HUmble Bundle had a free game: Killer is Dead - Nightmare Edition
Wait... Your son's school expected him/you to make a giant snowflake? What if you didn't have that machine... That would've been the biggest pain in the butt to make.
My wife said she could do it because "her husband" had a giant carving machine. She forgot to tell me just how big of a snowflake she needed until last night in which case I informed her that DarthTigger501 had my machine so I called him up and this got done quickly!
You should of use a bigger tool would’ve been much faster to cut and it won’t slip as much
Hate to be that dude, but you kinda look like Jack black in Nacho Libre with that stash...
This channel will live, I️ repeat, This channel will live! xD
H
+Seanp016 damn straight it will! And you need to update to latest iOS since you have the strange question mark box bug.
Barnacules Nerdgasm
Does this only affect iOS devices? Because I don't see it. If so that is a perfect opportunity to get a proper phone. Lol
Fucking amazing technology. Can't imagine the code someone wrote for it
Now put that snowflake in a safespace and you're done with the project.
I believe you most certainly should carve an oversized fidget spinner that serves no practical purpose except to make people laugh, that's why we print Pikachu's on our 3D printers right ;)
we have a zund at my work, its a 10 foot by 10 foot cnc machine, kind of like that one only its about $300K lol
+Christopher Vayo that’s awesome.
What is the measurement of the X-axis aluminum structural profile?
Dig your videos man. You are a fun dude to watch and funny as heck.
Glad you enjoy my videos, the more random and unplanned they are the better they turn out.
Your content has changed a lot over the time , but still mad respect to you.
I'm always trying new things depending on my life situation and mind state.
Barnacules, you inspired me to waste scam callers time with your scam call pranks. I am proud to say that today while standing in the shower I was able to waste 45 mins of someone's time, claiming they were going to give me a $9,000 government grant. I even asked him if he knows my friend "Ben Chod" who works there. It was fantastic!😆
That's not foam. Foam is styrofoam. This is just a thin sheet of PVC
you guys are hilarious! i’m definitely getting an x-carve now 😂
While it maybe slower... small bits are not a bad idea on parts that have questionable holding! Maybe slower but hey if you only got piece of material it can be a lifesaver! Speaking as a machinist ;)
Best shirt ever
What spindle is that X-Carve using? I haven't seen that one before! I have the dewalt 611
Its the OG, they upgraded to the DeWalt in 2017
Hi! Well technically that was a complete fail at frames 10:09 when you guys went "neanderthal" back to a simple blade. But I still want that X-Carve Unit (even the Hanky Lookn' Version). What exactly happened underneath the Foam Core Board? Could I have laid a big piece of cardboard (like from an old unfolded shipping box) underneath the target Foam Core and sprayed some Tee-Shirt Screenprint Adhesive under both the cardboard and and Foam Core before the cutting process?
wtf, so many videos is such a little time, i can only like this video
When I saw snowflake, I was thinking about liberals
LOL!
Dead on.
YASSS!!!!!!!!!!!!!!
yeah when i see a snowstorm i think about politics too....
How did you work in the IT industry for that long and not know about Intel vPro, seriously?
Why do you take me so seriously? Of course, I knew exactly what it was. But I was just having a laugh, you should try also :D
10:35 Minecraft music?
Also... I use two sided tape to hold down work pieces, but I only use acrylic for the things I make, not sure how well tape would work for poster board, it might be tricky to remove the sticky residue?
snigger.... "sticky residue"
Thumbs up from Down-under
was just watching your codegasm series for like the 20th time :3 PLEASE BRING IT BACK!!
We have to reshoot episode 2, but we will soon.
OMG THANK YOU!!!
i know this wont resenate with you like it does with me but you are much more than you give your self credit for!! you are awesome! and i cant wait for codegasm to start
good vid ,this guy sounds and seems to look alot like john candy
Could one of those machines, or perhaps the smaller version, cut through malleable metal, like Copper?
I have a number of ideas of things I'd love to cut out, if I had one of those machines.
+Skiliner Yes, just need to go really slow.
Now I need to get me one, or make friends with someone who has one... I wanna make me a few cool necklaces and such, like a Horde symbol necklace.
Do!!!!!! More!!!!!!!!! 3D printing!!!!!!!!!!!! Please!!!!!!!!!!
Just had to cut some snowflakes for my wife. I used my work's small hotwire cutter and made 12 in various sizes from a 36" x 48" sheet of polystyrene foam.
THANK YOU...THANK YOU...THANK YOU...THANK YOU...THANK YOU...THANK YOU...THANK YOU...THANK YOU...THANK YOU...
I bought Wallpaper Engine, thanks for the Video from 8months ago.
And this video as well xD.
i didnt even notice your mustache until you pointed it out in the end
Hey Barn I ran a big boy that was 5' x 10' made in Texas. But I'm Canadian and absolutely loved this video! Keep those cnc video coming. I'm actively looking to help men health because it seems that we all suffer in silence behind our mustaches. More needs to be done then just facial hair. " am I right? " haha
What were your feeds and speeds? I'd like to cut some one inch thick foam letters for my store front. They will be 12 inches tall.
"The z axis has roughly the same penetration as i do"... I am so glad i got to swallow that drink of coffee seconds before watching that. That was funny stuff. I was rolling.
Jerry, your stache is already 1000000x better than last year. You doin' some growth thricks this time round?
What's the music @ 8:35? Great video! We should be expecting an addition to the Barnacles family in nine months? lol
The 'stache makes the sex puns better... worse? ...berse?
Can you cut lattice like materials with this to make fancy privacy screen for out doors? I’d like to make a pergola roof out of it?
Excellent video. Very upbeat and fast paced
Just looking at your picture for your video you are looking very sharp man very healthy keep up the hard work and I'm out
you should mill some carbon fibre with it.
Or you can use Inkscape if you like open source soft
Who starts a video like that! I almost shat myself
+barnucles Nergasm pls shave da stach boi
Final note, I could be wrong, but maybe if you set the depth to 0.25" I am used to steel, but it can vary in thickness from 5 to about 12 percent
Dude, I just found this. It is so nice to see you smiling and watching this video was great!
Hello barnacules I love you videos keep it up
More like the mustashles, you look like the kindest bad guy. Love your maker stuff :)
@2.:50 roughly, For those not wanting to pay for adobe software or other payed imagine software: Inkscape can do svg too.
Doesn'y use Microsoft laptop... uses Edge as a browser..
Not my laptop.
Been away from channel a bit. Missed some great humor and the growing of the stash!
*insert joke about millennials and snowflakes*
stupid joke no need for this cutesy stupidity
How much does a machine like this cost.
Commentary was more like XXX-Carve :D. But honestly this was a laser project
WOOT !!
So just by letting me grow a moustache I am helping other's testicles?
Damn jerry that Mustache 😩
Is he still losing weight? Or did he stop
Missed you bud welcome back keep posting you have all the support in the world.
Skip to 8:27 if you want to see the cutting
Is there any idea to make this 4x8?
I love your mustache man
Just wondering if this machine is capable of cutting wood veneer?
Didnt finish the video and I have to say to finish the giant fidget spinner. Will continue watching later... wow
I have used many cnc machines with torches, plasma cutters and water jets being a welder. There is something that is always mesmerizing watching it cut.
I miss darth tigger in your videos
is that mine craft music at the end?
I always figured Jerry a special snowflake.
=^.^=
hey man awesome video keep it up man
3rd gen Intel still better than AMD. agreed. #Betterblue
Cant forget the Pentium 4 :3 ... Such a great CPU compared to AMDs stuff :)
... oh wait 🤔😋
nononononononono. please shave
Can you do a tour of the man cave