@@PBKreviews Can you tell how do I activate notification Light situated right side of front camera as Motorola forget to mention in manuals but in many videos here I see it flashing . Thanks . Mine is Moto G 40 64 GB India Version !! Hoping a reply from u soon.
@@SethiSahib Hi, that is not a notification LED like you think. It is only lighting up when the phone is completely drained of battery and does not have enough power to display anything on the screen. Then when you plug your charger to charge, it will light up white to show its charging so you are aware its taking in charge but just does not have enough power to display it on the screen yet. Then when the battery has enough power to display on the screen that it is charging, the white led light will turn off.
@@PBKreviews thanks for replying. I saw in a review video here it was constantly blinking... Well my device is just 2 days old and is on first battery charge.. Let the battery comes at low I'll update you. Thanks again for your humble approach. 🙏
@@PBKreviews could you please reply to me... I accidentally poked the downward mic with a pin ..is it possible that i have damaged the mic or something else?
Hlo bro, Can you plz tell if i can use moto g60 fusion fingerprint flex cable for moto g40 fusion...as i have one((got it ordered wrong) and my moto g40 fusion fingerprint flex cable has got ruined..
I made a mistake while removing the back panel and did not heat up the camera portion enough causing the black adhesive strip to be ruined. I do plan on ordering a new back panel but it will take a while so can I use the old Back panel without black adhesive temporarily?
Hello I was wondering if you could help me out with something. On the back of this phone, I can hear a tiny popping sound. It's near the bottom, where the lower half of the battery would be. You could only hear it if you apply pressure on the back cover, but it's not that loud. What could be the cause of this clicking? A loose back panel? The battery? Can the graphite cover make that noise? Should I be concerned if the same click can also be heard when applying pressure from the other side (the screen)?
Hi, those phones not too many people are interested in seeing, so its generally not cost efficient for me to purchase to do the videos. Also those phones are generally much more simple to take apart, and usually have little to no adhesive or glues holding the phone housing together. So the disassembly basically requires removal of some screws and not much more.
I am going to buy moro g40 fusion but i heard its hardware is cheaper and processor is totally new.i am confused. Should i buy this or not? Please tell me
Hi, it depends on what you are comparing it to. I didn't use the device thoroughly to have much experience with the functionality of it, but it seemed like a decent built device to me.
If I remember correctly for this phone, they are the same size for the covers (the black screws). But generally its best to keep them in order when you take them out since on some phones they differ in size.
The other one flashes white when the phone is plugged into charge and the battery is completely drained and has no power to display anything on the screen, it will flash white to notify you it is being charged until the screen can turn on to display charging.
@@PBKreviews yes brother you were right !!! I was shocked after seeing this becoz i didn't knew that my phone had a notification light..... And i love the phones which have notification light ........ But why it has such limited use in this phone ? It only glows when the phone is switched off and we plug a charger and that also for 1-2 seconds ....... How can we enable it for all type of notifications coming in my phone ?
@@amansinghal349moto has ambient display/ moto display that shows notification or lights up , it was even before when stock android supported this feature . That extra light can't be used as notification light even on custom roms It's just there for charging indication.
I have the same phone, since a week its only working while plug in the charger. If i disconnect the charger then it switched off. Kindly tell me what is the problem and do i have to change the battery???
Yes you're correct. I realized it after the video when I used the phone a bit. Usually they have some sort of diffuser for the light or a more pronounced flash LED but this one is nice and tucked away.
Check and make sure your headphone jack is clear and nothing is stuck inside it, or you might need to replace the headphone jack. Also try restarting the phone and see if that helps.
@@Dameon_Targaryen they look for signs of damage like stripped screws or missing adhesive etc. Most times its ok small things will not be noticed. Motorola for the most part honors warranty better than most other companies.
kindly tell me is there any possibility to install compass or Magnetometer sensor on motherboard manually , becoz moto don't provide it while manufacturing.is there any free hardware connection on pcb to put hand for this technical challange
That I would not know for sure, but if possible would require an expert in electrical engineering and soldering to be able to just install hardware like that and then someone with software engineering to program the firmware to work. Your better off getting a phone that has the functions you need comparer to going this route
@@PBKreviews excellent reply .thanks for writing back .as you open this phone may be you notice some free sensor connector on PCB .but now my phone is just few days old and under warranty .I have to waite for such experiment
@@lauranselhind no problem. Usually there are some solder points or unused parts of the motherboard but they are engineered and designed for specific leads and would not be plug n play.
Not sure the cost, couldn't really find the part available online. There is this link, but I have never bought from here before so not sure. www.maxbhi.com/camera-lens-for-motorola-moto-g40-fusion-white.html
You would need to take it apart and disconnect the battery cable. Then dry out any water inside and use a tooth brush or small brush to brush off any corrosion on any connectors or parts. Then You can re assemble the phone and see if it works. If not, you might have defective parts like a bad screen, bad battery or bad motherboard. You would have to test each with a new replacement part to figure out which one is bad and replace it. If it's the motherboard, you would probably have to find another phone.
Hi, can you tell me whether the usb port is soldered to the boars or is it replaceable? Also is it normal for a 5640 mah battery to be marketed as 6000 mah one? Thanks.
Hi, its soldered to the small sub board, but they sell sub board replacements so you would just replace that sub board with the charger port on it. All batteries are advertised with both a typical and rated capacity. If you look bellow it, the typical capacity says 6000 mAh.
Hello sir, During use moto g40 automatically off, even it is not responding while charging. I am worried from yesterday , please reply how can I fix it?🙏 I always take care of my mobile , even it is not fall down till now. I can't understand why it off suddenly? May be due to use of hAlf of it's storage. Please help me to fix it.....
@@suman9510 did you figured out the problem? I think these two problems are because of one cause The power button or battery is damaged and they are leaking some charge due to which the phone is unusable while charging
My phone fell and the front glass broke (Touch and LCD is working fine). Service center is asking ₹8000. Any idea about the cost to repair in secondary market? And where I can get parts? (i stay in Lucknow)
You can search on ebay for motorola g40 fusion lcd and you will see some listing from $50 to $73. I think the price for the service center to replace it isn't too bad considering the labor and adhesive that would be needed to reseal the phone.
@@PBKreviews But only the front glass is broken. LCD is working fine. Can't it be replaced seperately? Also, I purchased the phone for ₹15000, so ₹8000 is almost half the price...
@@vaibhavgarg9289 no the glass alone cant be replaced. Also from conversion im doing your service center is charging around $100 and part cost is $50-$72 so not sure if you're willing to do the job yourself but if you don't know how, $100 isnt too much more than $70 to have someone else do it for you. Installing the adhesive after might be tricky if you have never done it, and also cost some money to buy.
Hello sir ..at the bottom and top of my moto g 60 phone if I apply pressure on it there is a tapping sound ...should ,i worry about it...is it a problem ..can it be repaired in service centre
This is Indian variant moto G40. Good to see PBK teardown India specific phones as I am from India 😁
:) I try to do as many as I am able to. Glad you enjoy it!
@@PBKreviews Can you tell how do I activate notification Light situated right side of front camera as Motorola forget to mention in manuals but in many videos here I see it flashing . Thanks . Mine is Moto G 40 64 GB India Version !! Hoping a reply from u soon.
@@SethiSahib Hi, that is not a notification LED like you think. It is only lighting up when the phone is completely drained of battery and does not have enough power to display anything on the screen. Then when you plug your charger to charge, it will light up white to show its charging so you are aware its taking in charge but just does not have enough power to display it on the screen yet. Then when the battery has enough power to display on the screen that it is charging, the white led light will turn off.
@@PBKreviews thanks for replying. I saw in a review video here it was constantly blinking... Well my device is just 2 days old and is on first battery charge.. Let the battery comes at low I'll update you. Thanks again for your humble approach. 🙏
@@SethiSahib yea for some reason when recording with a camera, the proximity sensor or ambient light sensor will look like its flashing.
where can I buy the main board for the G60???
3:03 that led is for selfie flash
Yes thank you, someone pointed it out earlier. It had slipt my mind :)
As allways your videos are the best...👍👍👍👍👍
Thanks!👍
@@PBKreviews it the truth sir...
Brilliant design, pop off back, charge port on a separate board.
👍
@@PBKreviews could you please reply to me...
I accidentally poked the downward mic with a pin ..is it possible that i have damaged the mic or something else?
Grt channel for enthusiasts 😎😎
Thanks!
Hlo bro, Can you plz tell if i can use moto g60 fusion fingerprint flex cable for moto g40 fusion...as i have one((got it ordered wrong) and my moto g40 fusion fingerprint flex cable has got ruined..
Bhai laga kar check Kiya kya?
check Kiya work kr rha hae Mera..
I made a mistake while removing the back panel and did not heat up the camera portion enough causing the black adhesive strip to be ruined. I do plan on ordering a new back panel but it will take a while so can I use the old Back panel without black adhesive temporarily?
Yes you would just need to be careful water or debris dont go in the phone.
Nice video with complete details thanks for making the video
Thanks and you're welcome 😀
Hello I was wondering if you could help me out with something. On the back of this phone, I can hear a tiny popping sound. It's near the bottom, where the lower half of the battery would be. You could only hear it if you apply pressure on the back cover, but it's not that loud. What could be the cause of this clicking? A loose back panel? The battery? Can the graphite cover make that noise? Should I be concerned if the same click can also be heard when applying pressure from the other side (the screen)?
Hi, it's probably just the adhesive tape under the battery. Shouldn't be anything to worry about.
@@PBKreviews Thanks a lot, that's a relief to hear. This thing was bugging me all day, although now I've decided to ignore it.
@@TheManOfMuscle no problem, you're welcome.
Its the same for me too, should I return it or is it fine. Will it affect the functionality?
@@user-bq2ds8ly7d hi, it shouldn't affect functionality and should be fine.
U r awesome sir, subscribed.
👍 thank you I appreciate it!
how much heat do you need to apply for to the back cover to remove it?
Woow moto g40 india specific device.Nice tear down video.Please tear down moto e7 power
Thanks!
The teardown process should be the same as the e7 plus video I did a while back.
Hello.
How about repair to ZTE Blade A31 and ZTE Blade A31 Lite?
ZTE Blade A51 and A71.
Thank you.
Hi, those phones not too many people are interested in seeing, so its generally not cost efficient for me to purchase to do the videos. Also those phones are generally much more simple to take apart, and usually have little to no adhesive or glues holding the phone housing together. So the disassembly basically requires removal of some screws and not much more.
Is annoying facing speaker problems on this device? The one I have, it's sound is distorting when I'm increasing the volume to the max.
Can u tell me where can i get spare parts of moto g40 fusion like main board.
I am going to buy moro g40 fusion but i heard its hardware is cheaper and processor is totally new.i am confused. Should i buy this or not?
Please tell me
Hi, it depends on what you are comparing it to. I didn't use the device thoroughly to have much experience with the functionality of it, but it seemed like a decent built device to me.
Do all screws have the same size or do you have to remember where each goes?
If I remember correctly for this phone, they are the same size for the covers (the black screws). But generally its best to keep them in order when you take them out since on some phones they differ in size.
Do you have the part.number for that speaker? The one used in calls :)
Here is a link to the speaker which is compatible with multiple models. www.mobilesentrix.com/earpiece-for-motorola-moto-e7-plus-xt2081
Is that backplate metallic? On which batt sits on?
Do you mean the mid frame? It's a type of aluminum alloy
@@PBKreviews yes thanks
Hey, I´m in doubt about the G60, g52, and Redmi 11, which these are better build?, which these are better life span?. Like merited.
I would probably go with one of the Motorola devices.
@@PBKreviews Thanks for your help in my decision.
Hello! Thank you for the nice video. Can you please tell which are the EDL points??
Would you tell me the name of g40 64 mp camera sensor?
Hi, I'm not sure exactly what the name of the sensor is or which brand etc.
It's omnivison flagship. Even supports 8k recordings if you've a SD870+
Samsung .
Omnivision Ov64b
Hi, I've a G60 which camera is not working and display too broke last week, can you help me with where to get the spares.
Here is a link to a screen: amzn.to/3aCYVwv and for the camera you would probably have better luck searching it on ebay.
Bro,What are you using for shooting this video.??
a sony 4k handycam
Why there are 2 LEDs at the front ?
One is the front flash light but what is the use of the other one ?
The other one flashes white when the phone is plugged into charge and the battery is completely drained and has no power to display anything on the screen, it will flash white to notify you it is being charged until the screen can turn on to display charging.
@@PBKreviews yes brother you were right !!! I was shocked after seeing this becoz i didn't knew that my phone had a notification light..... And i love the phones which have notification light ........ But why it has such limited use in this phone ? It only glows when the phone is switched off and we plug a charger and that also for 1-2 seconds ....... How can we enable it for all type of notifications coming in my phone ?
@@amansinghal349 the software on the phone would need to be programmed to do that, i would not know how to do that :)
@@amansinghal349moto has ambient display/ moto display that shows notification or lights up , it was even before when stock android supported this feature .
That extra light can't be used as notification light even on custom roms
It's just there for charging indication.
Why the phone is so thick ??! Thick display or thick battery?! Or thick frame
The battery as well as the frame is a bit thicker.
Super explaination
👍
I have the same phone, since a week its only working while plug in the charger.
If i disconnect the charger then it switched off.
Kindly tell me what is the problem and do i have to change the battery???
Same problem here. How did you resolve it ? Please reply
3:01 that's a front flash LED
Yes you're correct. I realized it after the video when I used the phone a bit. Usually they have some sort of diffuser for the light or a more pronounced flash LED but this one is nice and tucked away.
@@PBKreviews how to activate it . No mentioning in mauals ..pity on Moto.
What is the screw driver precision
It varies from each brand/manufacturer but generally a 1.5 (25mm) Phillips screw driver or anything close to it should work fine.
G40 fusion display use in g60 ? Its working?
yup
Well i have charging port dock problem in my moto g60 . I dont know where to find that
Here is a link : www.ebay.com/itm/265465386096
Hii , after earphone connecting sound also from ear speaker and earphone both in my moto g40 .please help how to fix it
Check and make sure your headphone jack is clear and nothing is stuck inside it, or you might need to replace the headphone jack. Also try restarting the phone and see if that helps.
Sir, if desamble the Moto g40 and than resemble it. Does it violate Moto warranty ?
If they find out you took it apart, then ya there is a chance they would void the warranty.
@@PBKreviews they check screw stickers only or something else for warranty violation ?
@@Dameon_Targaryen they look for signs of damage like stripped screws or missing adhesive etc. Most times its ok small things will not be noticed. Motorola for the most part honors warranty better than most other companies.
Hi, what's the battery (price) for this (moto g40)
Price is different depending on where or who you buy it from.
@@PBKreviews Delhi location.. Koi general rate bta do... Rates me jadha farak nhi hota.. if uh know price then tell ..
How much actual internal storage available?
Different regions have different storage options.
Hello sir my mobile Motorola g40 fusions charge slowly and do not show turbocharger connected please sir
Might be a bad sub board, charger port, or battery. Can also be a loose cable.
OTG Supported?
not sure
Sir mujhe motrola g60 ka finger print chahiye ki price ka hai
Doesn't Moto g60 has a NFC antenna?
Bhai mere phone ka display change karna hai kitna pesaa lagega
Hey i dropped my motog40 fusion. There is no damage on outside as such on screen. But speaker sound is tearing.
Is it low volume or its distorted sound? Its possible it lifted up a bit from the flex cable causing a poor connection not sure.
kindly tell me is there any possibility to install compass or Magnetometer sensor on motherboard manually , becoz moto don't provide it while manufacturing.is there any free hardware connection on pcb to put hand for this technical challange
That I would not know for sure, but if possible would require an expert in electrical engineering and soldering to be able to just install hardware like that and then someone with software engineering to program the firmware to work. Your better off getting a phone that has the functions you need comparer to going this route
@@PBKreviews excellent reply .thanks for writing back .as you open this phone may be you notice some free sensor connector on PCB .but now my phone is just few days old and under warranty .I have to waite for such experiment
@@lauranselhind no problem. Usually there are some solder points or unused parts of the motherboard but they are engineered and designed for specific leads and would not be plug n play.
Hello sir how much will it cost me to change the whole outer camera plate
Not sure the cost, couldn't really find the part available online. There is this link, but I have never bought from here before so not sure. www.maxbhi.com/camera-lens-for-motorola-moto-g40-fusion-white.html
Okk thanks u can u please help me with another site
How much actual internal storage available out of 64gb?
Not sure, I don't have the device anymore to check.
How much original display and folder moto g60 price
Not sure, depends where you find it to purchase from, they run anywhere from $30-$60 usd.
Hello
My Moto G40 fusion is water drop and No power on . So sir please advice me.
You would need to take it apart and disconnect the battery cable. Then dry out any water inside and use a tooth brush or small brush to brush off any corrosion on any connectors or parts. Then You can re assemble the phone and see if it works. If not, you might have defective parts like a bad screen, bad battery or bad motherboard. You would have to test each with a new replacement part to figure out which one is bad and replace it. If it's the motherboard, you would probably have to find another phone.
What was the problem satyendra ?
Sir plz tell me where can i get moto g60 display folder original plz sir do reply also love this video❤️
I don't know about original ones, but here is a link to screens for the moto g60. amzn.to/3yPr3mG
Hi, we can get original LCD. we can get all original parts for Motorola
@@PyrozManSK what's your email?
Where is the processor chipset?
Nice
Thanks!
Hi, can you tell me whether the usb port is soldered to the boars or is it replaceable?
Also is it normal for a 5640 mah battery to be marketed as 6000 mah one?
Thanks.
Hi, its soldered to the small sub board, but they sell sub board replacements so you would just replace that sub board with the charger port on it. All batteries are advertised with both a typical and rated capacity. If you look bellow it, the typical capacity says 6000 mAh.
@@PBKreviews Thanks man and merry Christmas to you, I brought the g60 a few days and this video helped.
@@sayanroy3899 you're welcome, merry Christmas 🎅
@@sayanroy3899 Nice observation buddy, that battery capacity stuff you remarked about🌝
Samsung m32 and moto g40 which is better according to hardware??
The moto G40 is slightly better.
Please 🥺🥺🥺 give me the link to buy the link to buy the touch sreen of moto g 40 please help me love you from indian ❤️❤️❤️
Hi, here is a link : amzn.to/3kgjeSc
Hello sir, During use moto g40 automatically off, even it is not responding while charging. I am worried from yesterday , please reply how can I fix it?🙏
I always take care of my mobile , even it is not fall down till now. I can't understand why it off suddenly? May be due to use of hAlf of it's storage. Please help me to fix it.....
Try holding the volume down button and power button at the same time for 30 seconds and see if it reboots. If not, maybe its a bad battery.
@@PBKreviews Thanks for the reply
@@suman9510 did you figured out the problem?
I think these two problems are because of one cause
The power button or battery is damaged and they are leaking some charge due to which the phone is unusable while charging
Anyone having problem in earphone jack..I m facing this problem
What problem are you facing?
moto g60 mother board problem? I want buy mother board
You would need to find someone selling a phone with broken screen so you can take the board out of it. They don't sell boards by themselves.
Hey Vishnu did you buy a motherboard, it cost almost equal to the phone 's cost.
the left led is the front camera flash
yes, you are correct. I realized it after the video.
Battery technology?
Li-Po battery.
i think indian version can follow.
This is the Indian version 😀
Hi sir, Can you make a video on how to fix Headphone jack problem of moto g40 please .it is Humble request to you.
You can watch this video and see how to take it apart to replace parts. Not sure what else I can show you, plus I don't have the phone anymore.
Sir moto g 40 fusion display damage how much cost original sir please bolo
Not sure would be different prices on different online market places etc. You would need to check ebay, amazon or elsewhere.
This is only video of moto g40/60 teardown
My phone Moto g40 6/128
nice
next vivo v21e
Will do, should have it done in a week or two as soon as it arrives.
This is a front led flash for camera
yeah, realized it after the video. :)
Why Moto is giving only 5640MaH battery (Rated) Cap. In 6,000mAh ?
Not sure
My phone fell and the front glass broke (Touch and LCD is working fine). Service center is asking ₹8000. Any idea about the cost to repair in secondary market? And where I can get parts? (i stay in Lucknow)
You can search on ebay for motorola g40 fusion lcd and you will see some listing from $50 to $73. I think the price for the service center to replace it isn't too bad considering the labor and adhesive that would be needed to reseal the phone.
@@PBKreviews But only the front glass is broken. LCD is working fine. Can't it be replaced seperately?
Also, I purchased the phone for ₹15000, so ₹8000 is almost half the price...
@@vaibhavgarg9289 no the glass alone cant be replaced. Also from conversion im doing your service center is charging around $100 and part cost is $50-$72 so not sure if you're willing to do the job yourself but if you don't know how, $100 isnt too much more than $70 to have someone else do it for you. Installing the adhesive after might be tricky if you have never done it, and also cost some money to buy.
Bhi speaker kaha se Mila bhi
what do you mean?
@@PBKreviews mere mobail ka seapikar kharab ho geya hii kaha milega
@@PBKreviews mobail ka seapikar kaha milega
Hello sir ..at the bottom and top of my moto g 60 phone if I apply pressure on it there is a tapping sound ...should ,i worry about it...is it a problem ..can it be repaired in service centre
Its normal, probably just the adhesive strip around the fingerprint reader, camera lens.
Wow
😀
I want tha mother board moto g60
Moto g40 water test
Since it has already been taken apart, a water test wouldn't be accurate since it doesn't have the original seals etc.
I won't mother board g 60
You would need to find someone selling it online from sites like ebay or someone selling a broken screen phone to take the board out of it.
Tejas did you find a motherboard.