THE DF83 - Big Burrs. Great Value!
Вставка
- Опубліковано 9 чер 2024
- DF83 Coffee Grinder. Turin Giota Df83 First Impressions.
► Standart Magazine: www.standartmag.com/kyle
► Become a Patreon: / kylerowsell
► Join Home Barista Discord (FREE) / discord
► DF83:www.turingrinders.com/product...
miicoffee.shop/products/miico...
► DF64: www.turingrinders.com/product...
► SSP Burrs: geni.us/b5eVB
Thank you MiiCoffee for supplying the DF83 to test and review. No money was exchanged and they have no influence on my thoughts towards the DF83. Check out their store above.
Find me on Instagram: kyle.rowsell?ig...
Tik Tok: vm.tiktok.com/ZMLenRk47/
-- FEATURED LINKS --
🛒 My Coffee Bar Setup: kit.co/Kyle.Rowsell/my-coffee...
► Subscribe to 𝙎𝙩𝙖𝙣𝙙𝙖𝙧𝙩: www.Standartmag.com/Kyle
☕️ Coffee Gear I personally Use: kit.co/Kyle.Rowsell/my-coffee...
📷 CAMERA Gear: kit.co/Kyle.Rowsell/camera-gear
THIRD WAVE WATER: thirdwavewater.com/discount/K...
𝙇𝙞𝙣𝙠𝙨:
► Aeropress: geni.us/LKQ0P
► Kalita Wave: geni.us/8R8e
► Origami: geni.us/yeHtZHC
► V60: geni.us/3faIhf5
► Chemex: geni.us/CRQN
► Fellow Stagg X: geni.us/ZkO4A
OTHER LINKS
► MERCH: kylerowsell.com/collections/all
► Email: Hello@Kylerowsell.com
(Some but not all of the links above are affiliate links and provide me a small commission at no extra expense to you)
Timecode:
0:00 - Skit
1:04 - Intro
1:55 - Design
3:12 - Internals
4:44 - Workflow
5:40 - Specs
6:07 - Standart
7:07 - Taste Impressions
9:09 - Channel Update - Розваги
intro skit was GOLD
I like big burrs and I cannot lie
Who doesn’t! ⚙️
You sir are a great man
You other grinders can’t deny
You other brewers can’t deny
That when a grinder walks in with an itty-bitty base
And a bold flavour in your face
🤣😂🤣
The editing on that opener is perfect. Loved it!
Thanks Tyler. Just trying to have fun.
Congrats on going full time! Really excited for you. Your passion is undeniable and there’s nothing better than doing what you’re passionate about full time
thank you!
Big burrs baby!
Congratulations on full time pursuing your passion. It’s terrifying yet so incredibly rewarding making such a big change! Great things lie ahead!
Looking forward to all the new and continuously great content!
Congrats Kyle! Best of luck with this path 100% into coffee!!
Can't wait to watch the full review
Thank you Martin
The googly eyes made me chuckle:)
Wishing you all the success, brother. You deserve it, and thank you for the amazing education you have provided in your fantastically fun and informative content. 🎉🎉
Appreciate the kindness!
Good luck with the career leap! I know these a big steps and I wish you and your big burrs the very best!
Much appreciated
Hysterical intro👏👏👏
🍑⚙️🍑⚙️
Congrats on going full time! That's a huge move -- so excited for you!
Thank you Jason. Excited to share this and something else very soon!
Congrats on your new full time venture! Continue making great content :)
Good to see you here Pastor Kyle. Great content.
So excited for more frequent videos from you Kyle, hopefully more with those big burrs baby! 👀
You know it!
Big Burrs baby!!! Congrats, Kyle! Can't wait to see more from you!
Thank you!
Best of luck, Kyle! Looking forward to more of your videos!
Thanks friend
Congrats on going full time! Best of luck to you and your channel!!
I’d probably still go for the df64 over the 83 largely due to price and limited burr options.
The df64, P and E are excellent.
Thanks for convincing me to keep my DF64 again. Honest reviews are my favourite.
I like big burrs and I cannot lie!
Thanks for your continuous contributions to the coffee experiences of a lot of people out there! Please keep those videos coming!
Thanks for the comment! I will!
@@KyleRowsell Great! I can´t wait to watch them!
Interesting, you have a different corollary for big burrs than the intro.
Congrats on the plunge to full time! Happy to hear it's going well for you.
I thought I'd mention that I for one like the side cord. My coffee space is very small for the amount of equipment I have so I keep my grinders pushed back as far as possible. Usually the cord prevents me from being able to push the grinder right against the wall.
In the space I would use it I would want the cord to come out on the left side, as you face the grinder--I doubt there's an option for that.
Kyle you’re the man and congrats on making UA-cam a full time gig! Also great video, excited for this grinder! I guess the big question is….does the Niche still just reign champion?!
Big burrs baby!
Congratulations Kyle! Excited to see more content and continue learning about espresso and equipment from you!
I'm curious how the DF83 compares side-by-side to the new DF64p for espressos (all types of pulls), especially when paired with a machine like the Breville Infuser.
Thanks! I’m excited to share an update along with what else I’ll be doing.
And yeah I’ll do my best to do that in the full review.
@@KyleRowsell Can't wait to hear what's down the road!
@@KyleRowsell yeah! congrats! that's awesome
Big burrs baby! Just got my Lagom mini a week or so ago, so now I hold my breath every grinder review 😅😂 I chose the mini over the DF64 largely because of your reviews and I’ve been super happy with it so far (especially because my brew bar took a big downsizing to fit in the new apartment).
Based on these first impressions, I don’t see a good reason to go with the 83 over the 64, especially since I’m most interested in high clarity filter coffee. If I was going to spend that much I’d rather get the 64 with SSP burrs.
In any case, congrats on going full time, Kyle! Looking forward to the continuation of this channel 😁
@@cade5400 lagom mini is bae. I just used it to compete in aeropress.
Congrats on going full time! Also the opening of this video was hilarious.
Thank you. And I’m glad you thought so.
Good info, candor and humor...terrific vid as usual. Thanks
Much appreciated!
Congrats and can’t wait to see more and more coffee content!
Can’t wait to share more 🙂
Big Burrs Baby .. and congrats on UA-cam full time. You are and have been my coffee hero both here and on Patreon. Now I need to brew a pre-hurricane cup (am in Orlando, FL) and Ian's coming.
Stay safe. I appreciate this friend!
Kyle, congratulations on this, your new adventure. If one loves his job and can be passionate about it as well, that man has done the right thing and made the right decision. The riches will be forthcoming in many ways.
Thank you! I’ve got a few more things we’re doing to share soon!
Big burrs baby ! Oh dayum, happy for you man, that's a pretty big news ! For us it's great because it means that you will have more time to review things and to express yourself on the platform ! 😍
Best of luck Kyle!!
MAN your production quality lately had been through the roof.
The intro was really funny! More of that please!
That intro - WOW 😍
Good job!
Thanks! 😃
Loved the skit!! I don’t usually care for skits in info vids but that was so funny, keep it up😂
Big burrs baby! Congrats on becoming a full time UA-camr! Looking forward to more great content from you!
Thank you!
Love your videos your effort and your work. Thank you very much for all of that. I am still a beginner in the world of coffee. I will use for this year my sage grinder pro which is not the best choice I learned. On the otherhand I find this grinder enough for the start because with some beans you receive good results :D . But after that one i am going for something like the df83 :). Nice greetings from germany. Lets see what else comes in future
Great video. To the point. Looking forward to more content on it. I. Priced the hopper in the background was that for the DF83 or something else?
Love the stick on eyeballs!
That intro was excellent! Thanks.
You’re welcome!
Congrats on the full time! Upwards and onwards.
Bro!! That intro was absolutely amazing!!😂
HA. was so nervous to post it!
@@KyleRowsell I bet! But Bro that was great!
I'd like a video from you that goes over burr alignment. From how to determine if they are aligned and how to get them where they need to be.
Big Burrs Baby! I just recently bought a Niche Zero and loving it so far
glad to hear it
Epic video! Great news to have this soon also in the EU!
Thanks!
BIG BURRS BABYY!! (fantastic intro)
I’m no Hoffmann and Brad Pitt but I do what I can 😅
Big Burrs Baby - Good luck on your YT venture!
Thank you!
Big burrs baby!
Thank you for doing this! 👌🏻👍🐸
Ricard, Sweden🇪🇺
This intro was really funny!
Keep up the good work.
Big burrs babyyyyyyyy
Thanks!
Congrats on going full time! Big burrs baby! This is tempting me from my DF64 as I like the old school unctuous ($1000 word of the day) espressos over the more clean, astringent new school pulls.
Thank you. Very excited about the days ahead
Hey man, just found ya, phenomenal work, awesome quality video, great delivery, good quality stuff! I have subscribed!
Big burrs baby...but actually I don't even espresso yet...YET! Will be watching more...most likely not at work...
Thanks Diego!
Congrats on going full time! It's pretty exciting to see a flat burr this large at such a low price. Normally we see the 64mm flats with an espresso capable motor at around 1-1.5k and then going to 98mm flats doubles to triples that price. I will say I'm not a fan of the noise it makes while grinding, though I suppose that is something that would be only for a short amount of time anyways. The burrs running at such a high rpm seems iffy so I'd be interested in your long term use of it, especially when we've seen more and more information lately showing lower rpm = less fines = better cups. If I recall the lagom p100 you have also goes up to that high of an RPM, so it would be an interesting test to see if the p100 set the same RPM produced a similar cup to the df83 (I know the burrs aren't the same size, but if the p100 at high rpm produces a similar/same cup as the df83 and a significantly better cup at a lower rpm it might be reconfirming of this low rpm is better)
Big burrs baby!
I look forward to the roasting videos. That Aillio Bullet has been staring at us all through this video. Mocking us.
That intro was genius and awesome
Glad you enjoyed it 🙂
Lol bro that intro though … moneyyyyyy!!!
Haha glad you enjoyed it
You really need to try the Hey Cafe H1 grinder, it comes stock with burrs that are similar to SSP high uniformity which is great for a clear espresso. Unfortunately in north America it seem to be priced higher than in Australia by a few hundred dollars, which doesn't make it as good of a deal over there.
That has to be the best intro to a coffee review ever
Ha thanks!
Thanks Kyle for that review! I saw in the comments that you recommend this grinder over the Niche Zero for filter coffee. What about for espresso coffee? Which one gives the best results?
I’m sure you plan to tackle this in your final review but I’d like to see how this stands up against the Niche and single dose Mignon. Also, how was the alignment in your Mignon out of the box?
Hi Kyle,
I agree with your first impressions on the Rpm. The RPM should be just 1080 in order to achieve the same circumferential speed as the DF64.
Thx for the Video!
Big burrs baby. I just landed a beautiful red DF64 for $400, and quite happy with it, so not motivated to upgrade just yet. Very interested for the upcoming grinder and burr comparo, though!
Havent finished the video yet. But heres a like for the intro my man
Appreciate you
BIg burrs, baby…nice work, as always. Looking forward to the full review!
Excited to share it!
Got one on preorder!!!
Enjoy.
Congratulations for the transition to full time UA-cam!
love the intro haha !!
Haha that opening skit! Amazing
Thanks!
thanks kyle,
Kyle, love the comedy intro, well done. Big Burrs baby! I'm still hoping to pickup a niche zero tho, not gonna lie. Or is this better for pour over/filter (getting rid of my crappy espresso setup)
This is better for filter
Big burrs babyyyy,
Loved the video.
Especially the intro.😂
Thanks Arian!
I ordered one couple weeks ago.. BIG BURRS BABY! I will say I do NOT like the noise it makes while grinding, the speed seems way too fast and I'm skeptical that I will keep the grinder after seeing more info and videos. I hope I can be proven wrong and maybe there will be a fix in the future.
Congratulations on getting to do this full time. Your videos are some of my absolute favorites. Super jealous you get to do this for a living, enjoy it man! We'll be here supporting
Enjoy! And thank you. I'm SUPER grateful to do this.
Df98 next! Congratulations on going all-in for nerdy coffee!
Thanks dany. So excited about the future.
@@KyleRowsell follow your bliss!
Skit absolutely on point.
Ha! Thanks!
Nice. This is a little over my “comfort zone” in terms of price, but that motor is making me think hard about it. I need a grinder that will give me a nice French press in the morning and a decent shot in the early afternoon. I know that’s a big ask, but the description you gave that this one gives chocolate and caramel notes hits my feels. I’m about to pull the trigger even though availability is still a bit spotty. This review only bolsters that decision. Thanks!
Loved that Intro haha!
Thanks! 😅
There’s a lot of mazzer burrs that can swap into the 83. The 151G are GREAT for filter, and can probably do turbos.
I think I mentioned this and more info on some mazzer 83mm flats in the discord.
Yea! Very excited to get my hands on some. Hopefully I’m able!
Which Mazzer burr would you recommend for espresso? More clarity than what these stock 83mm burrs can offer.
Curious as well for espresso. Where can I find a list of burrs? I see one cast burr set at my reseller and I can see one SSP 83mm with Red Speed Coating for 350$. Silverknight coating and TiN are sold out. And in the video its mentioned that SSP Multipurpose are in development.
@Braxton Jens are they in zm grinder from mazzer?
Big burrs babay. I just bought a Niche zero but I think I might preorder one of these....
Big Burrs Baby! nice video!
"if anything it's above average" lmfaooo the feels
Thanks for this first impression video. I ordered one. I've been without an espresso grinder for the past 3 weeks. Had to send mine in for repairs and I don't think it's worth fixing. Thought about about the DF64P until I saw this. Waiting for your full review.
Full review in the next couple months!
Big Burrs Baby!
I’m happy with my df64, still looking forward to what you have to say about the other burrs you’ll try
You should be! The df64 is good.
Very nice intro since the guy pouring water-blowing-powders-magician-like video 🤣🤣🤣
Thinking about this one...
It is true, premature bellowing leads to less grinding.
Big burrs baby! Can't wait to hear about the 83 SSP.
Can't wait to share!
@@KyleRowsell wonder if the SSP 83 will have a different profile than the Mazzer 151 which already comes in a hardened version.
Thanks for the review!
How much alignment was needed? Was it simple?
Which burrs do you have on hand, and planning to review?
It was off and needed two shims.
Was the grinder come with the shims?
Which burrs do you plan on reviewing?
I can't speak for the alignment because my DF64 was pretty good from factory but it is a great improvement not having to push the feeder to screw in the top. I had to cut off and replace the dial as well as fix the threads on mine because of me incorrectly screwing the dial by mistake. As for the fines, I tried a few declumpers and in the end I ended up with no declumper since it produces the less amount of fines and the mess is manageable with RDT. I'd appreciate no declumper vs declumper testing in the full review of the 83 since from my perspective it's a night and day difference on the 64 and it can apply to this one as well.
Big burr’s baby! ☕️☕️☕️
Wish u all the best.
Thanks Timz
Great INTRO!!!!! 👏🏼👏🏼
Glad you like it!
BIG BURRS BABY!!!
8:25 excuse me we're just not gonna talk about this shot?!!?!? Sheeeeesh Kyle 👌
Thanks for noticing 🙂
Hi Kyle, How would you compare the shot from the DF83 stock burrs vs a shot from the Weber Key?
Hi Kyle! It is so great that have you here to provide such a great quality of coffee content. I can’t wait to see more of you!
Back to the grinder, I don’t think their bet is for people who know little about burrs nor coffee. It is for those (us actually) who enthusiasts enough to change different burrs.
Anyway, it is so great to have more choice of grinders for home for such a value. Can’t wait the full review!
Thanks Davis!
For the price, beats the competitions
Big Burs Baby!! And Googly eyed grinders! Cheers from the Discord!
Cheers!
Very interested! But only if there's a burr choice for coffee connoisseurs. I'm pretty disappointed that they haven't found a way to to put it together with lesser tolerances. Either way 700 bucks for a gateway to 83s is intriguing.
Best intro ever! 🤣
😇
I like the eyes you put on the grinder 😃😃😃
More to come 👀
That intro was freaking hilarious. Well done! What was that at 0:56?
I’ve been testing the DF83 with stock burrs for about a week now and it’s been alright. I’ve been impressed on the cup quality from some medium roast decaf coffees but I haven’t been loving it on my go to light roasts (all V60). I’ve been having a ton of fines compared to my Lagom mini and overall haven’t enjoyed the cups from the DF83 nearly as much. Testing this has made me fall in love with the Lagom mini all over again for how quiet it is and how easy the workflow is.
Curious if you’ll still be releasing a full review of the DF83? If you do, I’d be interested on your thoughts regarding stock burrs on the DF83 vs stock on the Lagom mini and Fellow Ode
I have a DF64 V4 and had to remove the stock declumpers (kind of like the ones that come on these) for the silicon declumper so it would stop clogging, and I have had much better results with that declumper, so I'm wondering how these declumpers will hold up for espresso long term. I was offered to upgrade to a DF83 when it comes out so I would be very interested in a longer depth review of whether it performs better and how the burr options differ. Really liked this video for initial thoughts.
I experienced the same thing with those clear plastic declumpers. Clogging, tons of static, and still had more retention then the silicone declumper. I recently purchased extra silicone declumpers from EO, now I'm interested in the 83 but silicone declumpers won't transfer over it looks to small comparably
@@brianharman82 yeah I'm wondering the same thing, they even include a RDT bottle with the DF83 like it needs it. The silicon declumper on the Df64 solved a lot of my issues, I'm wondering how this one will fare with the double plastic like the V4 I had so much trouble with, and if they will make a silicon one for the DF83 (or more updates to it like they did with the Df64).