I am 42 and this is still awewome to watch! When i was 17 a friend of mine had an Aerox when it just came out. He had let it tuned by an profesional tuner at that time. I remembered when he showed us the tuned Aerox and let me and my friends drove it for the first time. We had no idea what the hell was going on haha. It was just insane. And we all had 70cc at that time. But a highly tuned Aerox with a LC Minarelli was just something else.
@@javierdrielingen1883 het frame is al oud maar de scooter is in 2018 zo gebouwd als ik me niet vergis. Inmiddels is hij verkocht en heb ik hem niet meer.
Echt heel vet! Respect voor de toewijding! Zelf ook met een nieuw project bezig. Doe er ieder jaar 1tje voor de lol. Vorig jaar een Phantom van schroot naar iets moois, nu een Aerox. Keep 2t alive zegmaar, altijd wel snel, maar onderklasse als ik dit weer zie! Ga je meteen volgen!
Hey ja klopt Sdeel. Ik denk dat piaggio altijd wel harder op top kan ivm over range. Deze heeft / had toen nog een std vertanding dus met deze maximale toeren zou ik een andere vertanding moeten nemen voor een hogere top. Nu heb ik meer trek kracht
@@arief3991 Nou dat is een kill switch die moet eigenlijk om je pols stel dat je valt dan valt de motor gelijk uit of met een sprint dat je scooter er niet vandoor gaat. Is een beveiliging.
Ho visto questo video ora purtroppo a distanza di 2 anni e ti posso dire che spostava forte, bello aggressivo e premuroso di arrivare al suo range. Il tempo di aprire il gas già sei a 100🤣
ciao ahah si è veloce il massimo era 143 velocità calibrata con una marcia leggermente diversa. in questo video ho appena fatto montare un nuovo carburatore e ho fatto un giro veloce per vedere come andava. imposta qualche altro video ma questi sono quelli che piacciono di più alle persone...
@@R.D.G. nix zu danken. Es muss ja mal einer Gelobt werden wenn einer schöne Arbeit macht. Die meisten sind ja nur am Lästern oder wissen alles besser.
@@R.D.G. i know i had mhr team replica 6t and out of the box already 16-17 hp.only never liked the exhaust ports bridge design.its very critical point for the piston.
@@jenny-masterchef oke the exactly precision of the port I don't know the tuning specialist dit it. I know wat you mean it's closed to it. Heard that ty start making it new again from the fabric
@@R.D.G. mine mhr was modified by malossi itself so it can fitted on the stock crankshaft size without touching the engine.so it was very impressive but maintance was crazy.those piston rings had very short lifespan.anyway have fun with that little toy.
Hay bro I had a areox and speed fight wrx model. Now my son has a aprilia area 51 think same engine minerali wats the stock jeting on the bro cos I spent 250 euro on a tk performance pipe so would u give me a rough idia of wat size upjet I'll need and wat size isstock main jet it's doing 60mph as it is only destricted
Hey there. Stock jet is 12 mm when I start with mij 50cc i put an 21mm carb on it changed the membrane and right connected to the carb. But I first had an 17.5 mm carb but wanted bigger and faster.
Hello there all the way from Australia. Well the list wat I use on the scooter you can see in the text I put below the video in the context. But wat exactly do you meen with the front wheel pup up on take off 😬 You mean the paint on it?. Or the power to lift ?
@@R.D.G. Hello!! Where abouts are you located? I saw what you put in text but I could not understand what everything was. Yeah power to lift wheel. Is there an easier way to contact you so we can discuss this further!
@@ciaranrhodes4002 hi. Well it's an tuned 70cc cilinder. The hole setup is giving around the 25 hp depending witch gear ⚙️ I have in. This video is sith the stock gear so it's giving more in the bottom that makes it bounce up. The scooter is light in weight so that's easy. The clutch also grab fast so it's almost direct tourgh. If u want to ask more it's no problem te send here in youtube. You can always delete it or ask me to delete 🙂
@@R.D.G. okay mate I’ve just got a few questions that was all. I’ve just brought an aerox and wanting to get it to bump up off take off. Where did you get all your parts for it from? I’m wanting to get similar power out of mine. But don’t really understand everything you have got on it!
@@Olivier- oké nitro really 🤣.... My first scooter had a full polini Evo setup but that was a longe time ago the videos from then are in bad condition. It's to pitty
hey are you using the stock motor mount? because i see that you have a reverse intake setup and i was just wondering how you fit the subframe on because im trying to build a similar setup.
@@ferno1275 hey no problem. If you search subframe yamaha aerox on Google you find. I think Amazon or eBay has it. In Holland where I live you can buy it in more webshops.
Are you using a stock water pump with that setup? How the hell isn't that bearing and plastic wheel flying apart! Seized up two pumps on my Aerox with a 70cc racing setup under just 100km of running, had to go with a Bosch electric water pump after that.
Hi. Your the first one ho see it 😅 It was keeping strong for a while. I already renewed it but I also drived not so much, only a couple of km each year. But your right an electronic pump I'd better 👍
@@R.D.G. Ho 40 anni è ho sempre montato Malossi da ragazzo...Ho avuto Booster Phantom Honda e Aprilia. MHR Forever. Con questo video mi avete fatto respirare il profumo della benzina! Io toglievo anche il miscelatore...
@@autodipo9856 bello sentire. Ho già 34 anni ahah quindi non è il primo scooter che ho avuto. È bello sentire che ci sono ancora persone anziane che si prendono cura di questo e ripensano a quel tempo. anche un booster è fantastico
Hi what cc have ? And what carb is on that monster...i have a nrg mc2 with a 50cc malossi and a 21mm dellorto it s making his job very well,but i want to GO on another level
@@R.D.G. well the carburetor is a 28 mm i understand but then you have jets inside the big one is called the main jet and the small one the pilot jet .. i wanted to know if its a 40 or 45 ? and the main jet as well if its like a 150 or smaller ?
@@maximbelyaev7156 The size of the piston is always stated in the head of the piston on Malossi cylinders and in the cylinder base, you should look at that first. The pistons are available from size 0 (smallest piston) to size D (largest piston). Each oversize is 0.01mm larger in diameter So you have the following, so that's overange Size 0: MAL-34 8654 Size A: MAL-34 8654.A0 Size B: MAL-34 8654.B0 Size C: MAL-34 8654.C0 Size D: MAL-34 8654.D0
Ehi, un ragazzo l'ha fatto appositamente. C'è solo 1 set di cover come questo airbush. Spruzza carene uniche. scooter personalizzati Amsterdam olanda che è la sua azienda puoi vederlo sul sito e mandargli una mail per info. Non conosco i numeri di colore ed è passato un po 'di tempo (:
Hey good question. It wel served some time. Also in the mean wile it need some service. It's always expansive 😐 So hou long yea the cilinder and piston the first km it's the most compression after that it's weaknesses some. You can continue or replace if your wallet allows 😅
@@R.D.G. how often like in kms do you need to change a piston? on like high end 70cc cylinders? im getting a r/t 70cc so i need some tips and how much oil do you mix with yours?
@@kristers-eb6xb well in the beginning its giving a lot of pressure more when it is new. Around 50 at 100 km its getting less. But it will not say that it is broken only its a little bit slower, so in a sprint it's not super. The mix I did was on 5 liter 167,5 ml I mixed with elf htx 976+ sae 50
@@lukakrcic766 ok I get it. Maybe i had the same probleem then. If u search on Google it will help you. From here I can't help you further, I must see it to remember it.
Hi, I purchased malossi 80cc, malossi exaust and delorto 21mm.. what main jet idle jet needle to use to get maximum performance? Is other thing that I should change? Thank you
@@mitedogandjiski2162 hey. Its whiteout the lightning divise it's just the hpi rotor for speed it don't have light on the scooter. You can buy it everywhere online. If u want to have the light/dynamo you must buy it extra and montage.
Jo man vraagje misschien dat jij het weet ik heb een yamaha jog rr met dr50 snel 17.5 carb maar trekt kut op als ik me poweronevario en polini koppeling er op die laat die niet veel toeren toe met wegen op gwn rijden dan loopt die maar 60 maar als ik de originele vario met polini koppeling loopt die 90 maar met 3 dips
Hoi. Dat is lastig te zeggen omdat ik hem niet zie en hoor. Het kan dat je veren van je koppeling stakker moeten en je rollen lichter of zwaarder. Ja carb moet ook goed afgesteld zijn. Je bougie moet mooi koffie met melk bruin zijn. Afstelen is niet makkelijk en je moet spelen todat je steeds verbetering voelt. Welke aanpassing die je veranderd dat je dat voelt met rijden welke je hebt aangepast. Als je scooter vanaf stilstand op toeten komt en vervolgens optrekt dat moment zit bijvoorbeeld in je koppelings veren. Je hebt je drukveer en rollen ook nog 🙃. Ik denk dat je dit wel weet je zal moeten veranderen rijden en opnieuw enz enz
@@R.D.G. oke me carb staat goed afgesteld hij is Coffee bruin nu heb ik gwn de originelen vario met 7 gram rollen volgens mij en koppeling heeft witte trekveren met blauwe druk veer van polini maar ook als ik gele trekveren met originele drukveer er in doe komt die nog steeds nog over een bepaald toeren tal. En als ik de powerone vario gaat die gwn niet over 60 ook met andere trek veren
@@bram8450 scooterafstellen.nl/howto-tekst/transmissie-variorollen-druk-trekveren/ Ik denk maar weet het niet zeker. Dat je een beetje moet starten. Die snelle vario er in en dan rollen 5 of 5,5 gram. Rode drukveer en een beetje starke trekveertjes ik weet niet welke denk Rood ?. als hij veel toeren maakt en moeilijk wegrijd zijn ze te stark moet je de blauwe hebben. En die link even doorlezen.
@@R.D.G. Ok van wanneer is deze video dan want de testa rossa is de opvolger van de 7t en voor zover bij mij bekend is de oude 7t uit productie, iig voor mina
@@dyc4107 ja dat klopt dit is het oude type. Hij is toen een tijdje uit de markt geweest en nu is hij er weer dus je hebt gelijk. Ikzelf ben er inmiddels weer uit zeg maar dus weet niet goed wat de vernieuwde is. Mocht je verder wat willen vragen geen probleem 👍
357hp/L out of a naturally aspirated single cylinder. That's insane.
💪
Two Stroke power
@@tristanselvander4026 😁
@@R.D.G. en
@@tristanselvander4026 ВВ
Still one of my favorite rox video
Tnx 👌 the sound of it 💪
Its magnificent for a small engine that sound like superbike 👍👍🔥🔥🔥🔥🔥🔥great built
Tnx, yes the sound of it is great..
Many rpm and open carb makes it 💪
Wow 😲 that so cool man 👍
Childhood dream right there, even if I'm now 29 I still can't get it out of my head lol.
Cool hea.
Fast bikes 👌
I am 42 and this is still awewome to watch! When i was 17 a friend of mine had an Aerox when it just came out. He had let it tuned by an profesional tuner at that time. I remembered when he showed us the tuned Aerox and let me and my friends drove it for the first time. We had no idea what the hell was going on haha. It was just insane. And we all had 70cc at that time. But a highly tuned Aerox with a LC Minarelli was just something else.
when it comes to mopeds this is a super car!
💪🏻 haha yoo
omg that is one fast moped! i have a motorcycle right now but i really want this scooter too
💪🏻💪🏻 Cool hea its flying Xd
Wow the power of that thing!
I'm going to build a rox for my next scooter, so please give me tips about it!
do you have an insta?
Hey i dont have insta. but if you have a question please ask.
tip take your time for it
@@R.D.G. welke bouwjaar is dit
@@javierdrielingen1883 het frame is al oud maar de scooter is in 2018 zo gebouwd als ik me niet vergis. Inmiddels is hij verkocht en heb ik hem niet meer.
@@R.D.G. ok maar is dit de 2005?? Of 2006
@@javierdrielingen1883 2005 dacht ik
Echt heel vet! Respect voor de toewijding! Zelf ook met een nieuw project bezig. Doe er ieder jaar 1tje voor de lol. Vorig jaar een Phantom van schroot naar iets moois, nu een Aerox. Keep 2t alive zegmaar, altijd wel snel, maar onderklasse als ik dit weer zie! Ga je meteen volgen!
Ja gaaf hea hij gaat ook echt hard heb er meerder filmpjes van op staan ook een dragscooter die gaat helemaal af
Zelf ook bezig met een rox sprinter :)
@@Yamaha_driver2024 leuk ook mhr beetje vergelijkbare setup ?
Sdeel 😂👍🏻 had wel sneller verwacht. DDL had een pia blokkie voor mij gemaakt een paar jaar geleden 21.6pk 70cc hebo evolution ding liep 143 GPS 😅
Hey ja klopt Sdeel. Ik denk dat piaggio altijd wel harder op top kan ivm over range. Deze heeft / had toen nog een std vertanding dus met deze maximale toeren zou ik een andere vertanding moeten nemen voor een hogere top.
Nu heb ik meer trek kracht
Wat een apparaat🤩
💪 gaaf hea 💪
Kut te laat voor school, of nee toch niet😂😂
@@R.D.G. wat is die rood ding wat aan die stuur is?
@@arief3991 Nou dat is een kill switch die moet eigenlijk om je pols stel dat je valt dan valt de motor gelijk uit of met een sprint dat je scooter er niet vandoor gaat.
Is een beveiliging.
Mashallah la bête 😍
💪
Ngl that is pretty sick!!!! Sheesh🔥🔥🔥
🏍💨
Ho visto questo video ora purtroppo a distanza di 2 anni e ti posso dire che spostava forte, bello aggressivo e premuroso di arrivare al suo range. Il tempo di aprire il gas già sei a 100🤣
ciao ahah si è veloce il massimo era 143 velocità calibrata con una marcia leggermente diversa. in questo video ho appena fatto montare un nuovo carburatore e ho fatto un giro veloce per vedere come andava. imposta qualche altro video ma questi sono quelli che piacciono di più alle persone...
Echt een hele vette Aerox
Schöne Farbe sieht echt super aus gefällt mir die hat nicht jeder 👌👌👌
hallo danke für das kompliment
@@R.D.G. nix zu danken. Es muss ja mal einer Gelobt werden wenn einer schöne Arbeit macht. Die meisten sind ja nur am Lästern oder wissen alles besser.
@@marioneumann406 Das ist richtig, es ist eine Menge Arbeit. lustiges Hobby, egal was jemand denkt. ich liebe es
hey guys you do a really great job ... !!!
Great Job vs Evil < < <
Muy wapa la aerox . Y la pintura espectacular👍👌
gracias💪🏻
Looks like something Predator would ride lol sick bike.
Tnx 😁
happy to see someone stil using old mhr 7t cyl.watch out there,police are very alert.
Hey yeah that's true 😶 7t is great btw 👌
@@R.D.G. i know i had mhr team replica 6t and out of the box already 16-17 hp.only never liked the exhaust ports bridge design.its very critical point for the piston.
@@jenny-masterchef oke the exactly precision of the port I don't know the tuning specialist dit it.
I know wat you mean it's closed to it. Heard that ty start making it new again from the fabric
@@R.D.G. mine mhr was modified by malossi itself so it can fitted on the stock crankshaft size without touching the engine.so it was very impressive but maintance was crazy.those piston rings had very short lifespan.anyway have fun with that little toy.
@@jenny-masterchef 💪
👍 loopt goed! Nu krijg ik heimwee naar m'n oude Aerox :)
Dat zal best. Geeft toch een soort gevoel van ik ga er 1 kopen 🤣
@@R.D.G. 😁 ja precies! Heb pas een Yamaha maxster gekocht meteen een Malossi mulivar dr in... Maar het is toch niet zo mooi als een tweetakt vol gas!
@@airdevil21 ja dat klopt.
Is net een vliegfiets zo 😋
Wat een beest..prachtig😍😍
Gaaf hea. En dat geluid 😶
Wat kost zo’n ding haha, serieuze vraag
@@bouss2382 nou 2de hands rond de 2000 euro en om zelf op te bouwen paar keer het dubbele alles bij elkaar.
Une machine de guerre 🖤🖤🖤
💪
De ouf
C est ta mère la machine de guerre
Le monstre😮
Damn dat ding loopt lekker ben zelf ook met een sprinter bezig maar komt nog lang niet in de buurt haha
Ja gaat op vol toeren door van onderin naar top💪
@@R.D.G. Lekker man haha
Lekker man rij zelf met een standaard 7t yasuni c21 etc
sounds powerful
A lot of rpm 😋
BROER HOEVEEL TALEN SPREEK JIJ HAHA respect tho nice aerox bro
HA Google Translate 🤣 Maar Tnx ^^
بومبا ڨاز 💥💥💣 في طريق 👍👌
🏍💨
Do you have en video , you drive it on dyno.. i like the Sound on your Yamaha Aerox
Nice .....
Hey no sry i dont have it to pitty (:
Die galm van t geluid van een stage 6 is goud 🤘🏾🔥🔥🔥🇱🇺
Is alleen geen stage 6!
Geiler sound mann
Tnx 😁
@@R.D.G. 💪🏻😈
Insane build, 👍
Tnx 😀
What gearing are you using? Very quick looking aerox.
Hey 13/44 or the standard for sprint.
This video standard one
Nice build
👍
So muss das sein❤
💪
That's a sick build
💪 0_o
Hay bro I had a areox and speed fight wrx model. Now my son has a aprilia area 51 think same engine minerali wats the stock jeting on the bro cos I spent 250 euro on a tk performance pipe so would u give me a rough idia of wat size upjet I'll need and wat size isstock main jet it's doing 60mph as it is only destricted
Hey there.
Stock jet is 12 mm when I start with mij 50cc i put an 21mm carb on it changed the membrane and right connected to the carb.
But I first had an 17.5 mm carb but wanted bigger and faster.
Marvelous! It's lovely is it still alive?
Hey yes offcorse i only sold the scooter 0_o
What weight do you use for rollers? Thank you for your answer. Another question is that a 70cc?
Yes A 70CC it is.
Rollers are 3.7 gram
RDG sweet great thanks for the reply my friend.
@@middlechild3503 no problem
@@R.D.G. would you recommend 4.3-4.5g rollers
@@mitkogruv386 depend on the setup you have and wat is better when you put in and drive.
I had 3.7 but first 3.9
Hey mate. I’m from Australia, I’m interested to know what parts you have to make the front wheel pop up on take off.
Hello there all the way from Australia.
Well the list wat I use on the scooter you can see in the text I put below the video in the context.
But wat exactly do you meen with the front wheel pup up on take off 😬
You mean the paint on it?.
Or the power to lift ?
@@R.D.G. Hello!! Where abouts are you located? I saw what you put in text but I could not understand what everything was. Yeah power to lift wheel. Is there an easier way to contact you so we can discuss this further!
@@ciaranrhodes4002 hi.
Well it's an tuned 70cc cilinder.
The hole setup is giving around the 25 hp depending witch gear ⚙️ I have in.
This video is sith the stock gear so it's giving more in the bottom that makes it bounce up.
The scooter is light in weight so that's easy.
The clutch also grab fast so it's almost direct tourgh.
If u want to ask more it's no problem te send here in youtube.
You can always delete it or ask me to delete 🙂
@@R.D.G. okay mate I’ve just got a few questions that was all. I’ve just brought an aerox and wanting to get it to bump up off take off. Where did you get all your parts for it from? I’m wanting to get similar power out of mine. But don’t really understand everything you have got on it!
@@R.D.G. if you have WhatsApp send me your details
What a beast
👌
Good scooter, but i prefer a small Spitro with Mhr team 80cc. In France it’s what we like
Hey yes here to big bore sets.
Only this is the 70cc category.
We have it here also a lot.
Mostly on a Piaggio zip 🙂
@@R.D.G. piaggio is Good 😉 ! Here we take a spirit, and make the nitro’s motor in. In 70cc i like the polini evolution
@@Olivier- oké nitro really 🤣....
My first scooter had a full polini Evo setup but that was a longe time ago the videos from then are in bad condition.
It's to pitty
and with the malossi Team 2 with 25 HP wow ...
💪💪💪
How about your cvt setup, weight of rollers, what springs there is and what jet do u have in carb
Hi.
Weight rollers 3.9
Black springs
Jet is 150
@@R.D.G. thank you very much, how about torque spring?
@@maximbelyaev7156 the heavy one
Hey Mate , ik zou graag willen weten wat de set up van deze aerox allemaal is , ik ben bezig eentje te bouwen en deze draait lekker man
Hoi ja hij draait goed.
inmiddels is hij weg helaas, De setup is als volgt.
Malossi mhr cilinder 70CC 7t DDL tuned stage 2.
Carters tuned.
Polini evo piston for more power.
Yasuni c30.
Hpi rotor.
28mm carb Polini.
Crankshaft Polini Evo.
Malossie VL14 membrane .
Stage 6 wig.
Stage 6 subframe.
Stage 6 monsterdisk + caliper.
Stage 6 filter.
Stage 6 clutch Race.
Mallosi vario 13056 /over range.
Polini Evolution Ceramic Airspeed 3 Halfpoulie.
V-snaar long overrange minarelli hor+vert polini 248.040.2
Double radiateur.
Koso speed counter.
Top performance carter head.
Yss shock absorber.
Adjusted teeth.
Custom setup (airbrush)
Custom saddle .
Custom wheels metallic.
Custom front fork metallic.
Frame black coating.
What year is your roxy❤
Hi 🙂
Older frame of 2005 but the year rebuild is 2018
@@R.D.G. soo aerox is from 2018,engine from 2005😂
@@trevi4093 hi. No only the frame is old the rest is 2018.
It was because the frame has original registered serial number 👍
@@R.D.G. where are you from btw my brother🔥
@@trevi4093 Nederland
Sound 😍
Cool hea 💪
wow amazing
hey are you using the stock motor mount? because i see that you have a reverse intake setup and i was just wondering how you fit the subframe on because im trying to build a similar setup.
Hi. Well its not the stock one.
you can weld it yourself off corse its not easy ,but... you can also buy it online.
I only changed it a little bit.
@@R.D.G. thank you for the reply! do you know where i can buy one online?
@@ferno1275 hey no problem.
If you search subframe yamaha aerox on Google you find.
I think Amazon or eBay has it.
In Holland where I live you can buy it in more webshops.
Ive got a yamaha aerox with a 70 cc kit on it do you have any tips on making it faster i dont know alot about bikes
Hello.
Well... good carb and an overange set & clutch to start.
Good exhaust
Are you using a stock water pump with that setup? How the hell isn't that bearing and plastic wheel flying apart! Seized up two pumps on my Aerox with a 70cc racing setup under just 100km of running, had to go with a Bosch electric water pump after that.
Hi.
Your the first one ho see it 😅
It was keeping strong for a while.
I already renewed it but I also drived not so much, only a couple of km each year.
But your right an electronic pump I'd better 👍
🤣🤣🤣🤣that's bad ass bro 💪💪💪let's gooooo!
😋 lift off 💪
Nice Build.. What year is the Bike? And what country are you in... thanks
Hello, it's an older bike and built new from the paint on the frame 3 years ago.
I'm from Nederland 👍
which setup?
Malossi mhr cilinder 70CC 7t DDL tuned stage 2.
Carters tuned.
Polini evo piston for more power.
Yasuni c30.
Hpi rotor.
28mm carb Polini.
Crankshaft Polini Evo.
Malossie VL14 membrane .
Stage 6 wig.
Stage 6 subframe.
Stage 6 monsterdisk + caliper.
Stage 6 filter.
Stage 6 clutch Race.
Mallosi vario 13056 /over range.
Polini Evolution Ceramic Airspeed 3 Halfpoulie.
V-snaar long overrange minarelli hor+vert polini 248.040.2
Double radiateur.
Koso speed counter.
Top performance carter head.
Yss shock absorber.
Adjusted teeth.
Custom setup (airbrush)
Custom saddle .
Custom wheels metallic.
Custom front fork metallic.
Hi! how heavy roll weights and what size of primary and secondary drive
All regards. A regular dude struggling to reach the peak of a 70cc
Hello it is....
Roller Malossi HT 19x15,5mm 3,7 gram.
Mallosi vario 13056 /over range.
How come you use a 28mm carb?! Isnt that way too big for a 70cc engine? And so what main nozzle you use ?
@@engsweviner9831 hi.
No it's good can bigger also 😁 the tuner advice it.
Main is 150 if I can remember or 148 it's dependent with gear I had
Bomba atomica! Malossi vero? Bella livrea e ottimo sound! Mi ricorda il mio Phantom F12! 🦾💪🏻❤️🤯🤩🇮🇹👍🏼
Ehi, sì figo, va come un razzo 💪🏻 ed è davvero malossi
@@R.D.G. Ho 40 anni è ho sempre montato Malossi da ragazzo...Ho avuto Booster Phantom Honda e Aprilia. MHR Forever. Con questo video mi avete fatto respirare il profumo della benzina! Io toglievo anche il miscelatore...
Troppa potenza mi si rompeva e ho imparato che dopo un certo punto devi levarlo. Oltre a togliere peso eliminavo anche un incoveniente.
Rispetto ragazzi mi avete fatto ritornare in mente i bei tempi! ❤️🦾💪🏻🤯🤩🇮🇹👍🏼🤑😆
@@autodipo9856 bello sentire.
Ho già 34 anni ahah quindi non è il primo scooter che ho avuto.
È bello sentire che ci sono ancora persone anziane che si prendono cura di questo e ripensano a quel tempo.
anche un booster è fantastico
Sa marche fort 💪
De ouf 😍
Ces vraie que sa marche vraiment bien
Wonderful monster.
What does the carburetor nozzle and needle use?
tuning specialis did that I don't know exactly😅
@@R.D.G. I see, I get it.
important question: why does the POLINI piston provide more power ... ??? Many Thanks
Hey. Well it's for more compression said the guy ho did the tuning😎 and he setting the scooter on the test machine 👌
El sonido del yasuni es el mejor digan lo que digan, mira que sonaban bien los carrera 21 pero el carrera 30 para mi no hay escape como ese
Así es.
son los escapes con mejor sonido y ciertamente en combinación con un filtro de aire oprn😁
how much...There is a delivery to Iraq
hey there. Its already sold
Hi what cc have ? And what carb is on that monster...i have a nrg mc2 with a 50cc malossi and a 21mm dellorto it s making his job very well,but i want to GO on another level
Hey 70CC and a 28mm carb. the list you see at the video. update is alway good to do 💪🏻
@@R.D.G. how about the crankshaft,stock?
@@victorchirita7067 polini evo 👍
Wat is zijn sprintsnelheid van 0 naar 136? Echt bizar👍
Hoi.
Van 0 naar 136 zou ik niet weten.
Sprint deed rond de 6.5 sec op 150 meter
Where can i buy one ?
0_o you must build 1 💪💪
where did you get that backseat cover?
Special made 👍
@@R.D.G. cool
Sounds good for a diesel
Really 🤣
insane
Wat voor uitrusting heb je erin? Vertaling Dank je wel
He there this is the setup 💪
Polini evo 70CC 7t.
Polini evo piston for more power. Yasuni c30.
Hpi rotor.
28mm carb Polini.
Crankshaft Polini Evo.
Malossie VL14 membrane .
Stage 6 wig.
Stage 6 subframe.
Stage 6 monsterdisk + caliper.
Stage 6 filter.
Stage 6 clutch Race.
Mallosi vario 13056 /over range. Polini Evolution Ceramic Airspeed 3 Halfpoulie.
V-snaar long overrange minarelli hor+vert polini 248.040.2
Double radiateur.
Koso speed counter.
Top performance carter head.
Yss shock absorber adjusted teeth.
In finland every jonne has same powered aerox
what about the main jet ? and the pilot jet ? thank you.
It's an 28 mm carb.
But wat do you mean with the pilot jet ?.
Greetings
@@R.D.G. well the carburetor is a 28 mm i understand but then you have jets inside the big one is called the main jet and the small one the pilot jet .. i wanted to know if its a 40 or 45 ? and the main jet as well if its like a 150 or smaller ?
thank you
@@xavier-ew4yo Oke nou i get it. main was an 144 or 148 with the std stock gear. and 150 with sprint gear the pilot jet is realy dont remember😬
Belle peinture
what exhausting is this scooter?
Yasuni c30
Deze heb ik toch op marktplaats gezien kan dat kloppen?
Hoi.
Ja dat klopt.
Hij is inmiddels naar een andere eigenaar toen 😶
Que frenos llevas??🤔
Disco monstruo (stage 6)etapa 6 con calibre.
es solo la parte delantera, la parte trasera es estándar.
Suara knalpotnya mirip suara mesin kelapa parut
haha ya kedengarannya bagus ^^ kamu dari daerah mana di indonesia
Ehat mods do you use
Hey there.
You can see it on the discription of the movie there is the full setup of the engine
Macht der Motor außer Krach auch noch was anderes?
geh hart ^^
can u give me a link where u bought polini evo piston, please?:)
Hi.
It was speed-parts in Nederland.
@@R.D.G. can you please give me a full name of a piston?
@@maximbelyaev7156 The size of the piston is always stated in the head of the piston on Malossi cylinders and in the cylinder base, you should look at that first.
The pistons are available from size 0 (smallest piston) to size D (largest piston). Each oversize is 0.01mm larger in diameter
So you have the following, so that's overange
Size 0: MAL-34 8654
Size A: MAL-34 8654.A0
Size B: MAL-34 8654.B0
Size C: MAL-34 8654.C0
Size D: MAL-34 8654.D0
@@R.D.G. i have the same cilynder
@@R.D.G. i cant send u link there of the piston i found, maybe u can give me ur contact, ig or something else
☄️☄️☄️☄️☄️☄️☄️🚀
💪💪
@@R.D.G. sigues teniendo la ese cohete?
@@JoseGonzalez-hw4xf lamentablemente se ha vendido
Dove hai preso le carene , che colore hanno? Sai dirmi il nome specifico ?
Ehi, un ragazzo l'ha fatto appositamente.
C'è solo 1 set di cover come questo airbush.
Spruzza carene uniche.
scooter personalizzati Amsterdam olanda che è la sua azienda puoi vederlo sul sito e mandargli una mail per info.
Non conosco i numeri di colore ed è passato un po 'di tempo (:
@@R.D.G. grazie dell'informazione
@@gioelecostanzo1511 👍
How long does this engine last at this level of tune ?
Hey good question.
It wel served some time.
Also in the mean wile it need some service.
It's always expansive 😐
So hou long yea the cilinder and piston the first km it's the most compression after that it's weaknesses some.
You can continue or replace if your wallet allows 😅
@@R.D.G. how often like in kms do you need to change a piston? on like high end 70cc cylinders? im getting a r/t 70cc so i need some tips and how much oil do you mix with yours?
@@kristers-eb6xb well in the beginning its giving a lot of pressure more when it is new.
Around 50 at 100 km its getting less.
But it will not say that it is broken only its a little bit slower, so in a sprint it's not super.
The mix I did was on 5 liter 167,5 ml I mixed with elf htx 976+ sae 50
What kit have u put in
Wat do u mean with kit ??.
Hey,how did you fit the throttle
Hello. It's an handle that makes the cable go faster. It's in the speed handle on the steering.
At the carb It's just the normal connection to it.
@@R.D.G. I know but I have problems with it I have to grind inner plastic so it doesnt hit
@@lukakrcic766 oké 🤔 mm I don't remember exactly here you buy it as a set but also you need to buy a different gas cable.
@@R.D.G. My cable is okey but it hits inner plastic with end of gas where you can adjust it
@@lukakrcic766 ok I get it. Maybe i had the same probleem then.
If u search on Google it will help you.
From here I can't help you further, I must see it to remember it.
Hello my friend you have Polini 28 correct ,the jet' you have 42/132 yes ?
Hello yes carb is 28.
The main is ?/150
What variator do you have?
Hi,malossi vario 13056
Does it effect much or changing variator is not that necessarily?
@aykanbekmezci5033 yes good differences.
I wood also recommend overrange set.
Clutch belt all setup
cos'è quel filtro nel copricarter? a che serve
Ciao. cioè per raffreddarlo e il filtro è contro la polvere. ovviamente penso anche che dipenda dall'aspetto... sembra bello 😁
what is that red string on the key
Kill switch key cord. Of u fall off the engine stops 👍
Wat heb je in je zijpan?
Wat bedoel je precies ?
@@R.D.G. wat voor setup rij je
@@Djgiano597 hoi.
Staat bij de video welke onderdelen enz er op zitten 👍
Your gear is it stock ?
on this video yes
Nice
Just curious, what carb you running on that?
28 mm polini carb
Hi, I purchased malossi 80cc, malossi exaust and delorto 21mm.. what main jet idle jet needle to use to get maximum performance? Is other thing that I should change? Thank you
The hpi rotor fits without any Changes ?
Yes its montage directed on the crankshaft.
Its montage by the mechanic guy he set it at the good point 👌whiteout any changes as far as I know
@@R.D.G. where did you bought IT?
ITS With Electricty right ? Light Machine connection
@@mitedogandjiski2162 hey.
Its whiteout the lightning divise it's just the hpi rotor for speed it don't have light on the scooter.
You can buy it everywhere online.
If u want to have the light/dynamo you must buy it extra and montage.
Wat betaal je voor tunen
Cilinder alleen kan al vanaf 100 t/m 500
Dan nog je carters ed.
Afstelling van de scooter enz komt ook nog
Jo man vraagje misschien dat jij het weet ik heb een yamaha jog rr met dr50 snel 17.5 carb maar trekt kut op als ik me poweronevario en polini koppeling er op die laat die niet veel toeren toe met wegen op gwn rijden dan loopt die maar 60 maar als ik de originele vario met polini koppeling loopt die 90 maar met 3 dips
Hoi.
Dat is lastig te zeggen omdat ik hem niet zie en hoor.
Het kan dat je veren van je koppeling stakker moeten en je rollen lichter of zwaarder.
Ja carb moet ook goed afgesteld zijn.
Je bougie moet mooi koffie met melk bruin zijn.
Afstelen is niet makkelijk en je moet spelen todat je steeds verbetering voelt.
Welke aanpassing die je veranderd dat je dat voelt met rijden welke je hebt aangepast.
Als je scooter vanaf stilstand op toeten komt en vervolgens optrekt dat moment zit bijvoorbeeld in je koppelings veren.
Je hebt je drukveer en rollen ook nog 🙃.
Ik denk dat je dit wel weet je zal moeten veranderen rijden en opnieuw enz enz
@@R.D.G. oke me carb staat goed afgesteld hij is Coffee bruin nu heb ik gwn de originelen vario met 7 gram rollen volgens mij en koppeling heeft witte trekveren met blauwe druk veer van polini maar ook als ik gele trekveren met originele drukveer er in doe komt die nog steeds nog over een bepaald toeren tal. En als ik de powerone vario gaat die gwn niet over 60 ook met andere trek veren
@@bram8450 scooterafstellen.nl/howto-tekst/transmissie-variorollen-druk-trekveren/
Ik denk maar weet het niet zeker.
Dat je een beetje moet starten.
Die snelle vario er in en dan rollen 5 of 5,5 gram.
Rode drukveer
en een beetje starke trekveertjes ik weet niet welke denk Rood ?.
als hij veel toeren maakt en moeilijk wegrijd zijn ze te stark moet je de blauwe hebben.
En die link even doorlezen.
@@R.D.G. oke is goed zal er wel een keer tijd voor maken
@@bram8450 Ja het is lastig om zo te helpen via chat.
Beter is als je (even) hierheen komt 🙃.
Blijven proberen 💪
What about a main jet?
@@augis0001 hi main yet ? It's 150 or 155
بروح ميتك مايصر دزلي دراجه مثل هاي للعراق 😅😆
Is this originally a 50cc ?
No 🤣
Wat heb je dr allemaal op zitten
Hoi.
Als je de bijlage opent, het pijltje naar beneden naast de titel text zie je de complete setup staan 👍
Was dit de testa rossa?
Nee een gewone Rox
@@R.D.G. Nee ik bedoel de cilinder 😅
Was dat een malossi testa rossa? (Met rode kop)
@@dyc4107 😅 ok bedoel je dat 😬
MHR 7t geen rode kop.
@@R.D.G. Ok van wanneer is deze video dan want de testa rossa is de opvolger van de 7t en voor zover bij mij bekend is de oude 7t uit productie, iig voor mina
@@dyc4107 ja dat klopt dit is het oude type.
Hij is toen een tijdje uit de markt geweest en nu is hij er weer dus je hebt gelijk.
Ikzelf ben er inmiddels weer uit zeg maar dus weet niet goed wat de vernieuwde is.
Mocht je verder wat willen vragen geen probleem 👍
Hello my friend it is 80 cc or 100 cc
Hey there its a 70CC
Do you do bike builds for money a want exactly what you done here lol
No its just hobby 👍