@James Deane love the content . Need more off-season drift with this one and the 335i . Love the schassis but nice to see "new" things coming to the scene.
Richard Harrold He has to be talking about the race spec 300bhp cars as those intake tracks as sick. Def not better than this though in street trim. S65 also has multiple championships under its belt just not as many as e30 as it raced in DTM and Rallye, the latter being my favorite.
Brilliant Content love the vids. But that kits is eye watering expensivem cant justify that amount just for sound. Either love the car and keep up the work
5w50 oil will save your rod bearings Warmer thermostat (880090 motorad 90c from Dodge Viper) will bring up the car up to temp quicker and will make power less consumption of oil.
It won't. 10w60 is the oil this engine has been designed to work with. Bringing the car up to temp quicker isn't always a better thing. There's a reason the manufacturers spend a ton of money researching. Don't spread FUD and stick with stock specifications and care instructions if you want the car to live a happy life.
The rod bearings start to have issues when the engine is driven from cold, same deal with the S54 and S85 Gotta wait for the oil to get up to temperature, then it's viscosity is lower and it can lubricate the bearings properly- when it's cold the oil is too thick for the tight bearing clearances 👍
Thanks James. I care less about the cool looks. I only open the bonnet to work on my car, not for show. I would expect you could get almost the same result in induction noise just by using a pod filter instead of OEM. Would like to know if you can tell the difference between OEM and eventuri plenum.
I have a video with the mic under the hood of my Camaro and it sounds a lot like this. Now it has the c8 manifold and want to see what it sounds like after watching this.
Have u booked the VRT yet? As far as I could see they are fully booked out for the rest of the year and then it might be a bit more difficult bringing it in. Hope it all works out
James, what is your take on rod bearings. I have heard so many varying opinions. Based on the content and how this car is driven by UA-camrs, your opinion has weight. I have a '13 e93 58k km on it. I don't drive over 2.5k rpm until the oil reaches temp. Should I just change them for maintenance/safety of the motor? Throttle actuators I can just buy and keep them aside until they give in or just do them both?
The sounds is unreal. Very few engines can even come close to the sound of an S65 with a carbon airbox. A true motorsport dervied unit!
That induction sound is epic. Spine tingling. Reminds me of the e46 csl intake noise but with obviously 2 extra fun chambers
exaaactly
“Chrottle “
Welcome to Ireland 🇮🇪
Lol its music to my ears
Love it!
Hahahahaha
Fack-chree
Give the engine bay a clean or i will fly over, quarantine for 14 day's
And smack your bottom.
I bought a carbon intake for my dct e92 because of the video. Cant wait for it to arrive!
I get the same feeling with my 4AGE Blacktop with 4 velocity stacks on the quad throttle body, absolutely love it. NA Induction is the best :)
the best sounding v8 from natural aspirated engine ever made!! dang i wanna get one of those for my e92 m3!
One of the best sounds on a V8 engine!
Very nice up grade and sounds mint. Wish everyone a merry Christmas and amazing what everyone is doing for other families
Hello from Grinya James!! And Much respect from Russia!!
Damn..the difference is outstanding. Very nice sound
For an intake that sounds stupid cool. Massive difference.
Definitely a nice upgrade man. Loving it James🔥🔥🔥🔥🔥keep it coming man 🇯🇲 always tuned in.
7:33 that induction snarl noise reminds me of the 4.2 V8 in Audi’s RS5, sounds sick!
I love how excited you get over intake noise... And what a noise!!!
Loving the content guys all the best from N E Scotland 👍👍
I can't even explain to you how much I want this plenum! Sounds glorious!
These two lunatics are the right guys to throw an e92 intake at, smart move eventuri, solid burnout
The donuts was awesome that would make a great snapshot
eventuri are a game changer for sure
We added this kit to a 2017 fk8 and tested on dyno and gained 30ish bhp. No jokes. Serious kit
This makes me miss my E92 M3 even more 🤣 Brilliant cars, the Eventuri sounds awesome 👍
Have you enquired about a similar kit for the Lada? Could unlock unknown power gains!
New kit in Development. 😂
Your bmw is sounds good is that 2jz
Lifeofboris viewer 👍
Another great intake and happy customer Imran 👍
Carbon is the real deal 👍🏻
Man I hope your back in FD in 2021!!
The only better sounding bmw engine is the old v10, that Intake has made this one sound incredible though
What someone forgot the legendary csl airbox sound.
Agreed. I currently have the only all-carbon plenum in the world from Eventuri and it sounds absolutely unbelievable.
People forgot the BMW engine in the Mclaren F1
@@sepg5084 was it really? I never knew that
I think the v10 sounds good stock, any form of exhaust makes it annoying
Come to cars and coffee some day with your M3. If you have time.
That’s the next upgrade I want to get on mine mate. Very true the e92m3 motor sound never gets old. Cheers🍻
i got a signed print and they look sick, cant wait to put it up on my wall
Uh. That modification Sounds like a Chainsaw. I Love it.
God damn the sound ❤
wow, superb video, the reaction is amazing, sound is pure bliss
Absolutely love this car and it just got a whole lot better
@James Deane love the content . Need more off-season drift with this one and the 335i . Love the schassis but nice to see "new" things coming to the scene.
Wow it really sounds better with that carbon fiber intake plentum box.
Hello from Ukraine! as well as from Grinya!
I could seriously write a poem about that sound 😍 should I?
Man that sound is INSANE!! Love it!
Of all the M Cars, the E30 had the sweetest induction noise and the E39 had the best sounding exhaust.
Richard Harrold He has to be talking about the race spec 300bhp cars as those intake tracks as sick. Def not better than this though in street trim. S65 also has multiple championships under its belt just not as many as e30 as it raced in DTM and Rallye, the latter being my favorite.
A stock E92 sounds better in both areas IMO. The M88 in the M635csi sounds better than the e30 M3.
Ahhh thats so sick! i want to drive that car so bad! hahah looks like a blast! Keep up the awesome vids!!!
Can't wait to have my E92 m3 💯
Sounds absolutely insane. I really want this for mine 😍😍 love the accent too 👌👌
Definitely a must. Sounds amazing.
Probably a good time to do throttle actuator gears while you had intake off..
They have been changed recently
Looks very very straight forward
Made me tink about the last time I was in oirland, flew into Dublin, drove to Cork County. Tanks for the video. Much love James!
🙌🏾 from Grinya!
the sound is so good
Hello from Krasnoyarsk
always loved S65 engine!
Yayyy! Eventuri on James’s car. If you have Eventuri, you know Imran, I’m guessing?
That wind breaker looking 👌
What have you done to the exhaust? Sounds like a great balance of intake and induction!
Loving these contents!!
Brilliant Content love the vids. But that kits is eye watering expensivem cant justify that amount just for sound. Either love the car and keep up the work
Very nice difference!
Okay. Yeah, I need this.
Sounds sick very like e60 m5 even with 2 less cylinders
Hey deane.. Everyone has announced for OIDC oman.. Exept you.. Hope you gonna show up this year too..
Unfortunately we can’t make it this time.
@@JamesDeane130 we gonna miss the machine ..maaan cant imagine 😢
@@JamesDeane130 💔😓
That sounds class!
it sounds soooo good
5w50 oil will save your rod bearings
Warmer thermostat (880090 motorad 90c from Dodge Viper) will bring up the car up to temp quicker and will make power less consumption of oil.
It won't. 10w60 is the oil this engine has been designed to work with. Bringing the car up to temp quicker isn't always a better thing. There's a reason the manufacturers spend a ton of money researching. Don't spread FUD and stick with stock specifications and care instructions if you want the car to live a happy life.
Interested to know whether you've done the rod bearing replacement or not, and what's your take on it. As always, great content James!
The rod bearings start to have issues when the engine is driven from cold, same deal with the S54 and S85
Gotta wait for the oil to get up to temperature, then it's viscosity is lower and it can lubricate the bearings properly- when it's cold the oil is too thick for the tight bearing clearances 👍
Rings Lad 👌🏻
Hi JD! Hello from GRINYA!
I am surprised a 9 hp and torque gain yields such a noticeable increase. Did you get the intake for free?
MPOWER ALL THE WAY 🔥🔥🔥
Sounds amazing
Absolutely delighted to see this. 😎👌😍
Irish accent is top 3 in the world for me
Hello from GRINYA
Please tell us what you’ve done to the rod bearings. I’d love to take it up to 8.4K rpm more often on mine too!
Eventuri🙌🏽
‘’James Deane the drifting feen’’
Goosefuckingbumps !
When review on s15 ???
Be interesting to hear how much the vrt costs you?
Sounds Amazing.
Sounds amazing cheers
Thanks James. I care less about the cool looks. I only open the bonnet to work on my car, not for show. I would expect you could get almost the same result in induction noise just by using a pod filter instead of OEM. Would like to know if you can tell the difference between OEM and eventuri plenum.
Jimmy boiii I miss ya my 🥷🥷🥷🥷🥷💣💣💣💣💪💪💪🤗🤗🥰🤗🥰🤗🥊🥊🥊🥊🥊🥊♥️♥️♥️♥️♥️♥️
Hello from GRINYA!
I have a video with the mic under the hood of my Camaro and it sounds a lot like this. Now it has the c8 manifold and want to see what it sounds like after watching this.
Sounds great lad!!
my dream car
Have u booked the VRT yet? As far as I could see they are fully booked out for the rest of the year and then it might be a bit more difficult bringing it in. Hope it all works out
Fantastic sound..... 💪💪💪💪💪
class she's the rod mate
think we need some more e92 content on the channel
That is Savage
Send imran at evolve an email give him the specs exhaust nd the intake and he can send you a better tune so both mods compliant each other!!!
absoloute beast so it is james
To be sure, doncha know
Crisis time - do I trade my OG M2 (heavily modified) for an E92? Please help!
I was grinning as much as you were mate, classic stuff.
Fuck i hope i can have one of these within 6months🙏. Nice sound i can only imagine how it sounds
@James Deane can you tell me the wheel and tyre sizes you have on you M3? Thanks
That screw driver thoo🤣🤣🤣
Do you still have your worthhouse s15 and if so do you see yourself driving it again
James, what is your take on rod bearings. I have heard so many varying opinions. Based on the content and how this car is driven by UA-camrs, your opinion has weight. I have a '13 e93 58k km on it. I don't drive over 2.5k rpm until the oil reaches temp. Should I just change them for maintenance/safety of the motor? Throttle actuators I can just buy and keep them aside until they give in or just do them both?
do you have to add mods to your insurance if so is it like the uk one were it goes up?