Nice workup on the brakes, the only issue I can see is working under it with a HI-Lift, I had a jack slip out on me, at least put the wheel under the transmission so if it does slide out you have about 12 inches of safety.
You are correct about high lift jacks. I'll go as far as to say that the front wheels were thoroughly chocked and a wiggle test was done. I probably should have included that in the video! Thank you for the feedback, it's always appreciated.
I have an NAA. I use Cenex’s HTB, a hydraulic, transmission, wet brake fluid in my transmission, hydraulic, rear axle. Hello from north east Montana. 10 miles from the Canadian border.
That brake tool works fine if you use it right, I watch young people work on stuff, never clean your work. How long would it have taken to clean up that hub ? 5 minutes. Take pride in what you do, even if the customer doesn’t.. I guess over my 75 years we just learned to do things different. An honest days work for the pay we agreed to work for.
Nothing like putting new brake shoes on a leaking wheel shaft. It will be all screwed up in a short time.. Grease and oil dont go well with brake shoes.. I wouldn't do a job like that..
Nice workup on the brakes, the only issue I can see is working under it with a HI-Lift, I had a jack slip out on me, at least put the wheel under the transmission so if it does slide out you have about 12 inches of safety.
You are correct about high lift jacks. I'll go as far as to say that the front wheels were thoroughly chocked and a wiggle test was done. I probably should have included that in the video! Thank you for the feedback, it's always appreciated.
I have an NAA. I use Cenex’s HTB, a hydraulic, transmission, wet brake fluid in my transmission, hydraulic, rear axle.
Hello from north east Montana.
10 miles from the Canadian border.
Nice work! My dad has '54 NAA, did brake job, transmission fluid, I fixed the original Vane HY-Trol Pump with new seals.
That was very informative. Thanks!
Sure helped me identify where the drain plugs were as well as the filler cover.
It's always great to hear that I have helped someone! Thank you!!
That brake tool works fine if you use it right, I watch young people work on stuff, never clean your work. How long would it have taken to clean up that hub ? 5 minutes. Take pride in what you do, even if the customer doesn’t..
I guess over my 75 years we just learned to do things different. An honest days work for the pay we agreed to work for.
Why bother to clean it up. The axle seal was pouring oil out. I agree with doing a nice job but not with purposefully engaging in acts of futility.
I was told use all the same fluid in tranny gear box because the seal on pto shaft after 70 years leaks whats your take on that
Why would customer not want seal fixed
If that jack slips??? Bad day!!!
Nothing like putting new brake shoes on a leaking wheel shaft. It will be all screwed up in a short time.. Grease and oil dont go well with brake shoes.. I wouldn't do a job like that..
You missed the part about that being what the customer wanted.
your damn throttle needs a NEW spider spring/friction plate ... easy fix if you have common sense
Not my tractor. Not what I was hired to work on.