I wish I would have ordered this kit. I got the ict billet 1/2 spacer but I had to use heavy amounts of rtv for the gasket plate. I want that black gasket that you guys make can I buy that by itself?
you want the spacer material to be made of our plastic composite, this is the entire point to the spacer to reduce heat transfer, a metal spacer wont do anything, you will need to buy the spacer from the website, see here: fiinterchillers.com/product/lsa-lid-spacer/ And 20mm here: fiinterchillers.com/product/20mm-lsa-lid-spacer/ These are 10% off until the 10th of November 2022 with discount code: USA10
@@justinandrasstikwititfitne2161 no idea what car you have, please measure clearance before ordering (it does fit mot cars, it is your responsibility to check)
no but we do make the LT4 blower spacers which are of far more benefit on the LT4 over a lid spacer, due to the intercooler location you want to try to isolate the blower from the engine heat source so the intercoolers run colder.
Is that a zl1 lid with your Lid spacer? I have an stock LSA in CTS-V. Planning on getting a zl1 lid, do you think your product will still fit correctly?
Awesome video! I love when people show the proof instead of just saying what it does! Very cool!
Have you guys ever dyno tested your 20mm lid spacer? Curious to know, since 10mm offers a good gain
20mm was never intended to be a product, as such was never dyno tested. We can see it is worth more power from the MAF and intake temps.
How much for 1 lid spacer and exhaust blocks for 13 ZL1 from Forced Induction? Also do I need to do anything special after install like dyno tune
You do not need a tune all prices on our website are in AUD (Australian Dollars) fiinterchillers.com/lsa-lid-spacer/
So the car was tuned in the before run? or was the car tuned after the before run?
Car was tuned without the LSA lid spacer, then the spacer was fitted and the car was simply run up again on the dyno without any tune adjustments.
On this test which lid spacer was used 10mm or 20mm
10mm was used
How long does it take to ship to Texas ?
4-6 days with tracking and signature, however from mid Sep 2024 all orders will ship from Texas
I wish I would have ordered this kit. I got the ict billet 1/2 spacer but I had to use heavy amounts of rtv for the gasket plate. I want that black gasket that you guys make can I buy that by itself?
you want the spacer material to be made of our plastic composite, this is the entire point to the spacer to reduce heat transfer, a metal spacer wont do anything, you will need to buy the spacer from the website, see here: fiinterchillers.com/product/lsa-lid-spacer/
And 20mm here: fiinterchillers.com/product/20mm-lsa-lid-spacer/
These are 10% off until the 10th of November 2022 with discount code: USA10
I’m gonna buy yours now.Wish I would have known about it before I got the ict one. Is there any power difference between the 1/2 vs 20mm lid spacers?
@@justinandrasstikwititfitne2161 yes 20mm offers more cooling and more power
Ok thank you I’m gonna order one from you. Is there any hood clearance issues with the 20mm
@@justinandrasstikwititfitne2161 no idea what car you have, please measure clearance before ordering (it does fit mot cars, it is your responsibility to check)
Would this cause fitment issues with the wiper cowl on a VE SS?
We have not experienced fitting issues
nice results...how does this mod effect throttle response? does adding more volume slow down boost build slightly?
no negative effects on throttle response.
Would there be similar results for the CTS V lid? Also will this clear the strut tower brace?
yes we have it on many CTS -V's
Would it clear the strut tower brace on a zl1?
Hi Kirk !! Do you make a lid spacer for LT4 supercharger lid ? Thanks !!!
no but we do make the LT4 blower spacers which are of far more benefit on the LT4 over a lid spacer, due to the intercooler location you want to try to isolate the blower from the engine heat source so the intercoolers run colder.
Can you please tell me what's done to the powertrain to put down 500?
28% lower pulley, headers, hi-flo cats, fuel injectors, pod filter, interchiller, reservoir, LSA lid spacer
Have you installed Your Space on an LSA with a Nitrous Plate under the Cover?
No we have not but they should not impact each other
Was that a stock gts or running pulley upgrade or airbox?
Pulley, pod, exhaust etc etc
Forced Induction Interchillers What I mean is, since there is larger amounts than stock airflow might it be working better sooner than stock?
Is this the 1/2 in or full 1in spacer
10mm thick 0.39"
Does it require a tune?
no tune is needed
Whats the price on the LSA Lid Spacer? usd?
please email us via our website for all details and specials www.fiinterchillers.com
Please email us through our website www.fiinterchillers.com
how do i purchase this product?
email us here: fiinterchillers.com/#contact
Forced Induction Interchillers awesome thank you
Is that a zl1 lid with your Lid spacer? I have an stock LSA in CTS-V. Planning on getting a zl1 lid, do you think your product will still fit correctly?
As of today $378 USD
Did you consider buying this…I am?
Its too bad, i woukd really be into buying something like this, but it would raise my lid and hit my hood.
It raises the blower 10mm, you then have the option to mill the ribs off the lid for more clearance, lower the k-frame or even the engine mounts.
500 usd...
all prices on our website are in AUD, when you go through paypal it will show you the amount in USD on the final screen before you click finish