Amazes me how these little Hi-Helix roots blowers make such good HP 💪🏼🏁 especially compared to traditional old school Roots Blowers like the good Ol 6/71 which is basically a 6.9L blower so to speak 🤷🏼♂️lol Efficiency has come a long way.....
Agreed the efficiency of these units is incredible. Whipple Gen 5 is finally closing the gap in terms of competition, but TVS3100 systems are not far away and will probably flow enough to support 1500 WHP+ , insane!
@@ash156k I have talked at Eaton and Magnuson about why the 3.1 liter TVS sucked so bad that everyone abandoned it. No response so far. Easy thing to do: just upsize the 2650 by 3 percent in every direction. Done, IMHO. Magnuson, if they were smart, would use the dual-density aftercooler fin design they patented. The dual-pass aftercoolers of the Whipple Gen V 3.0L (aka the next step they can take towards looking like a TVS without violating design copying regulations, or personal pride?) are very efficient. They can produce 1500hp ON RACE GAS in the Mopar Drag Pak 5.7L engines. Putting the Whipple Gen V on the Drag Pak was a huge vote of confidence from Dodge. Now Whipple is producing the "knock it out of the entire stadium property" 3.8L Gen V supercharger.
Very nice. Wouldn't mind something like this on my USDM Cadillac CTS-V. Close to 800 on the stock blower and had been looking at all the 2650 replacement blowers but would rather keep the "stockish" look under the hood. Will be following this!
So prob not worth the swap from a FDFI2650 to a LSA2650 right? Or is there more potential to come ie more boost ? Bit to ask, but can we get a comparison of a stock LSA1900, ported LSA1900, and the LSA2650
@@HarropTV great!! Thanks a lot. I do have a 2017 isuzu mux, 3.0 TD. iwanted to enhance its speed someday. But i dont if it will benefit my engine in the long run. Anyway thanks for reply.
Amazes me how these little Hi-Helix roots blowers make such good HP 💪🏼🏁 especially compared to traditional old school Roots Blowers like the good Ol 6/71 which is basically a 6.9L blower so to speak 🤷🏼♂️lol
Efficiency has come a long way.....
Agreed the efficiency of these units is incredible. Whipple Gen 5 is finally closing the gap in terms of competition, but TVS3100 systems are not far away and will probably flow enough to support 1500 WHP+ , insane!
@@ash156k I have talked at Eaton and Magnuson about why the 3.1 liter TVS sucked so bad that everyone abandoned it. No response so far.
Easy thing to do: just upsize the 2650 by 3 percent in every direction. Done, IMHO.
Magnuson, if they were smart, would use the dual-density aftercooler fin design they patented.
The dual-pass aftercoolers of the Whipple Gen V 3.0L (aka the next step they can take towards looking like a TVS without violating design copying regulations, or personal pride?) are very efficient.
They can produce 1500hp ON RACE GAS in the Mopar Drag Pak 5.7L engines. Putting the Whipple Gen V on the Drag Pak was a huge vote of confidence from Dodge.
Now Whipple is producing the "knock it out of the entire stadium property" 3.8L Gen V supercharger.
#LSTHEWORLD 🤙
We want harrop lsa 2650 vs kong lsa 2650 😬
Or harrop Vs whipple
Very nice. Wouldn't mind something like this on my USDM Cadillac CTS-V. Close to 800 on the stock blower and had been looking at all the 2650 replacement blowers but would rather keep the "stockish" look under the hood. Will be following this!
Must have an awesome tune in that trans. Hats off to Hasty Auto-Trans 👌
Im getting the LSA 2650 in a few months myself for my GTS
I will be looking to get the LSA 2650 on my GTS, looked the goods.
The way he says "aluminum" LM-min-yum
Will these units be available for purchase in the U.S.? Excellent design, keep pushing the limits.
Listen to it sing
So prob not worth the swap from a FDFI2650 to a LSA2650 right?
Or is there more potential to come ie more boost ?
Bit to ask, but can we get a comparison of a stock LSA1900, ported LSA1900, and the LSA2650
What a weapon!
It would be cool to offer a kit that is ready to go for cathedral port owners.
Pretty sure Harrop has a supercharger kit for the 5.7 LS1
Looking good
Thats sick mate
What are the the deference between fdfi 2650 and lsa 2650?
Which one have more potential for high horsepower and cooling IAT
I hope one day you work on a 5.7l land cruiser
Definitely need this for my gts, oof!
9 seconds, low or high 9's? I am thinking of a LS9 Swap from the 3.6L LFX in Precious Diamond. Not yet a future plan that will be.
427 + 2650 = skits car
you'll see it on my chan this LSA 2650 hopefully very soon !
@@CurtisLSA bloody oth mate cammed up with big blower what could be better!
What are u guys doing to combat the bricks failing?
Insane...
Has the new lid and cooler come out yet
Hey mate sweet set up how much for everything
wonder what the price of the lid will be.
For mie is superchagers is + good the turbo
I love this car cuz wanna swap the monaro and ss for it lol
not the monaro! :(
'Only' running 22psi on a 427... lol
Supercharger want growing
What rpm converter is in the car
Do u guys have a seller in Dubai for nissan patrol y62 models
@@HarropTV thanks for the response
Is compatible to isuzu mux?
@@HarropTV great!! Thanks a lot. I do have a 2017 isuzu mux, 3.0 TD. iwanted to enhance its speed someday. But i dont if it will benefit my engine in the long run. Anyway thanks for reply.
Ls fits into everything...
Only!! 22 pounds of boost lol 😂
427, that's better ))
It’s an auto and this is australia............
ffs 🤦🏼♂️
The majority of fast cars in Australia are auto. 👍
@@fullboost the majority of fast car owners can only drive autos 😂🤦🏼♂️
A manual trans with that much power is just hopeless for most driving
@@ArchimedeanEye most drivers you mean
@@properaussie331 No, most driving.