Systema Infinity kit brief review
Вставка
- Опубліковано 19 лип 2021
- The kit is available in few HK shops. Around 1200 USD without the programmer included. It's definitely not for everyone and I would not recommend it. IMO this is only for the rich, tech enthusiasts or Systema fanatics.
It is very innovative and I really liked some of the advantages of the system, mostly the sound signature and more compact electronics. The brushless motor is obviously underpowered as it has to be a DSG to achieve a normal ROF, most likely duo to the speed of the motor had to be converted into torque. However with the default pre-cocking, the semi is very crisp. - Розваги
That is beautiful. I want to get my hands on an entire setup in the US.
The speed is adjustable, it's factory set for the same rof as an m4a1
You will be able to increase the rof with the programming card, but it's not built for rate of fire, its built for the response.
I do think it is a little pricey, but the research and development of the system would have been very expensive. And if you torque the selector screw too much it is very difficult to move, if you torque it a little with some loctite you can get a nice crisp selector.
Also if you manually engage the bolt catch and shoot the gun it will drop the piston and not pre cock it.
What I really want to know if they can make the motor perform good enough to run a regular SSG system with a long barrel and still keep cycling speed at comparable levels to AEGs.
I highly doubt it. It seems to max out at 1200 rpm. If you could even push it to 1400 rpm, that would be cut in half by the SSG. You would end up with 700 rpm maximum, that is without taking into account that the full draw of the cylinder will be much harder on the tiny motor.
It is a really cool system, but it will only be for CQB setups.
@@TheFluffyBunny1337 I don't care about RPM but I share your doubts about the motor being too weak to deliver european muzzle velocities with good performance.
Quick question - how are the ambi selectors compared to each other? Do you need the same strength on each side, to move it and d
o they fall into place like on the standard ptw?
Thank you very much for the video. ♥
They are harder than the standard and the connection between both sides is not solid.
Do you know why my Infinity peps 3 times and blink red all the times without it works?
It's either you battery not being 11.1v or your buffer cap is not shimmed properly.
Would a 14.8v or 18v battery improve it any?
Probably burns it. The trigger response is already good
You should try 220v
All how much
1200$ for the infinity kit (cylinder/gearbox/barrel/hop up). Then you’d need a ptw body. So 2000+ for a functioning rifle
Do you know if it fits FCC receivers?
Technically it should be compatible with regular receiver. But with fcc you never know. I have a stock fcc upper that cannot even accept fcc cylinder so I wouldn’t bet my life on fcc
Innovative but absurd prices
You mentoned you never got a regular model to work properly. So my question is.....why are you even trying to review the new model.( and the no DVD player/drive at the end, for sure makes sence)