That was awesome. Anyone who has changed a semi tire can really see how good you are at it. I like how you are constantly doing something. Never just sitting waiting for the tire to inflate or deflate.
Man that took soo long to air that tire up!!, but really your work is so fast and efficient that it makes airing up the tire seem long lol. Great work!!
i've been changing semi tires for quite a while now... and im going to steal ur technique after breaking the bead and bringing the tire with you awesome! bro just subscribed to ur channel
Respect man.i live in Belgium en did that job for 6 years with Profile tyre center.Every type of tyre.Cars,truck,tractor,heavy agriculture en industrymachines,all by hand.But stopt doing that.Problem is,after 2 or 3 years is not a challenge no more.But like i say,respect!!!
I,m experience 20yr service tech first foremost have a jack stand,then lean the tire up break the bead flip 1 time when airing the tire up just seat the bead when fully airing the tire bolted 2 the trl then air it up,and last but least save your back much as possible tell your boss man to get a lift gate on that truck,but other than that your doing good job!! Stay safe happy new year!!!
Started at a shop were they do a lot of these kind of tires just with your vids I've got the hang of them thanks one question what kind of chisel do you use on your air hammer?
Make a video when you collect payment lol. Fuck dude I busted tires for 5 years at my dads tire shop with all the latest machines. And here you are busting tires with some bars lol you’re a fucking beast dude.
Am a tire tech to save time n not get tired I lean the tire on the truck hit it n then lahy on the floor n hit it then use the bars to take it out but everybody has there own way to dismount a tire
Sooooooo fuckin dangerous bro. How are you gonna put your face right next to an inflating tire? Especially with those cheap ass Samson tires. No cage. No torque wrench. No jackstand. This isn't some third world country where safety equipment isn't available I just hope people aren't out there emulating your style, because someone is gonna get hurt. Also a bit of a tip, if you just remove the nut on the valve stem, then push the valve stem in, the tire will deflate in like 10 seconds.
That was awesome. Anyone who has changed a semi tire can really see how good you are at it. I like how you are constantly doing something. Never just sitting waiting for the tire to inflate or deflate.
Time is money
Man that took soo long to air that tire up!!, but really your work is so fast and efficient that it makes airing up the tire seem long lol. Great work!!
i've been changing semi tires for quite a while now... and im going to steal ur technique after breaking the bead and bringing the tire with you awesome! bro just subscribed to ur channel
+cummins 1998 Thanks for watching
Respect man.i live in Belgium en did that job for 6 years with Profile tyre center.Every type of tyre.Cars,truck,tractor,heavy agriculture en industrymachines,all by hand.But stopt doing that.Problem is,after 2 or 3 years is not a challenge no more.But like i say,respect!!!
I’ve been in the trucking business since 1984; but this man really takes me to school #RESPECT!
Thanks!
I,m experience 20yr service tech first foremost have a jack stand,then lean the tire up break the bead flip 1 time when airing the tire up just seat the bead when fully airing the tire bolted 2 the trl then air it up,and last but least save your back much as possible tell your boss man to get a lift gate on that truck,but other than that your doing good job!! Stay safe happy new year!!!
Do you use same method for aluminum rims ? how can I protect rim until I "get the swing of things " thanks
Great flow of work and tools just awesome workmanship.
I do not know what tools are you using to take of the valve.? Thanks again for your video s.
You are a Pro. 👍🏼
Thanks for watching. Subscribe if you haven't to see new upcoming videos.
Started at a shop were they do a lot of these kind of tires just with your vids I've got the hang of them thanks one question what kind of chisel do you use on your air hammer?
Breaking the inner bead then flipping it all in one motion! Love that!
Ya se retiró?
You are one awesome tire tech.
Looks like you left the tire chuck on the bed of that trailer when the video stopped?
What sizes do you keep in stock for truck emergency tire service?
I work at Euromaster heavy duty side, just interest how much dos that job cost if you dont count tire prise ?
Email me
How much by that service? From PR
Email me
Where's the torque wrench and why do you have separate air lines?
1 is always better than 2. I like to run the 1” impact with the bigger line for more air flow.
youre filling the tyres with nitrogen or air?
Widyan Widoseno that's a stupid fucking question. Can you not hear the air compressor running 😂😂
NITROGEN?
Its actually butane
almost looks like you have done that before.
Make a video when you collect payment lol. Fuck dude I busted tires for 5 years at my dads tire shop with all the latest machines. And here you are busting tires with some bars lol you’re a fucking beast dude.
Jest doskonały brawo 10/10 It is a perfect bravo 10/10
So many tools--and I can see that even having all the right tools isn't quite enough....you have to put a lot of effort into it.
I'm from Vietnamese. I'm want to buy chuck air same you. Minite 7'38. How much in amazon. Please. Thanks!
Thinh,,can di vay? Ko hieu.
Does anyone torque tires anymore?
I remember doing truck tires back in the 80s . Split rim an had to use a cage .
Are you still making videos bro???
I don't understand how he was able to remove that tire so easy. He didn't even break the bead all around the tire. I struggle with my dirt bike tires.
They’re bigger and the rim pretty much helps cuz of how heavy they are, still takes muscles tho
Could you make a video where your changing a tire on a 53 foot long box trailer.
It's the same
Very nice 👌 👍 👏
When I worked for ats .would have done that job in 5 mins
No Safety Cage? No Cleaning the Studs with Wire Beush and Putting Oil On them? No Torque of studs to 450-500 ft lbs? I bet he isn't TIA Certified?
How much you charge for that service from PR ,super easy bro 👍🏻
+Oscr M Super easy but Super expensive. Lol Thanks for watching
A dismount and mount normally runs about $25-30 dollars for semis.
Am a tire tech to save time n not get tired I lean the tire on the truck hit it n then lahy on the floor n hit it then use the bars to take it out but everybody has there own way to dismount a tire
The longest time on every tire is letting air out and putting air in
Cách bạn làm rất hay
Where is your tire cage at?
Morgan Hatfield or mount it after setting the bead to contain it.
It's on the truck.
Your doing a great job me amigo,:)
Good rule of thumb,,,,ALWAYS!, take 2 tires just in case .
Most definitely
Helo chào bạn cùng nghề
He forgot a lug nut
جميل
Sooooooo fuckin dangerous bro. How are you gonna put your face right next to an inflating tire? Especially with those cheap ass Samson tires. No cage. No torque wrench. No jackstand. This isn't some third world country where safety equipment isn't available I just hope people aren't out there emulating your style, because someone is gonna get hurt. Also a bit of a tip, if you just remove the nut on the valve stem, then push the valve stem in, the tire will deflate in like 10 seconds.
👍👍
Your very slow
Torque it up next time
R
F go rl
Tt I