It's subscription based. This communist parasitic ideology of sucking money out of people whether you use it or not is just revolving. doesn't matter how good the product appears it's still a theft and no matter of mental gymnastics can excuse that. Do you want to have emplty account, be poor and bleed out of thousands of little cuts? subscriptions are the fastest way how to destroy your budget and get nothing in return. And you can shove your exceptions to the rule up yours
Thank you, How can I done it in my app, in the client phone, and when the user confirms the final 3D object, then I store it on the server. I want to create an app, that user can create the 3D object with capturing it with mobile camera, and then I take it and print it for them. (something like that)
I have gat s sony FX9 able to shoot raw dng. so i can generate single fotos with a film to speed up the capture process. Do you know tutorial to follow this way ? thanks a lot !
Thanks for this. I wonder if the age of the phone impacts the outcome? I have tried a number of scans on a Pixel 4a5g running Android 14, and so far have only gotten one scan that was even slightly recognizable. Several came out looking like kaleidoscope images. The initial photos are clear, but something in the processing went sideways.
If the camera quality is not the best, the results will reflect that. But you can use any other camera, and then upload on the site as well. Also, don't forget to be in a well lit area for the best results.
Thanks for the response, @@NunoSilva3d I am unclear what is considered high quality in a camera these days, but the spec is: Pixel 4a 5G’s main camera module features a 12.2MP resolution with an f/1.7, 27mm lens. The 1/2.55" IMX363 sensor has been in use since the Pixel 3, and sports 1.4µm pixels. This combines with dual pixel PDAF and OIS for tried and tested reliable performance. I have been in a room with overhead florescent lighting and using LED floods for additional light. It seems pretty bright. I might try offloading and reloading the software and see if that helps. Then maybe try with a different camera.
Thanks a lot for this detailed workflow! I do have a stupid question: how do you manage to make the Ikea plate stand still on your tripod? Like does it come with a screw ting or you did some work around it? Thanks again
Yes. You import it into your workspace and snap a mesh to it. Then you can 3d print it. At least, that is my ignorant understanding of how it works. That's my reason for getting the app too.
How is it supposed to figure out the objects size to duplicate a 3d scanned file? It doesnt mention this at all so its just for visual not an actual model.
Hey great video, I'm into CNC machining and I frequently need to make job files of small to medium -large sized objects on solid works, is there a way for me to scan the objects with LIDAR or photogrammetry on iPhones or Android with mm accuracy and export it to solid works?
3D printers typically take OBJ (the file that was exported in the video) and STL types. The difference between the two file types is that OBJ tracks metadata, STLs don't. Source: I'm a 3D printer 🙂
on my fourth try , second time watching this video, I was trying to edit in meshmixer not many editing tools so important to get a good Model , to many rough edges and a hollow bottom so far.
Here's a question. I'm new to Nerf and photogrammatry. I found your tutorial educational. If I have made a scan, how can I share it from my website? Is that possible? Thank you in advance.
I subscribed to your website to download the model and check its quality, but all I received was a simple 3D bread and a plant. I expected the model shown in your video.
I wish he would’ve shown the mesh without the textures on it. That’s the real meat & potatoes of any 3D scanning and super-important for reverse engineering and 3D printing.
Nonetheless i just tried it out with horrible lighting and no turn table just on the floor and my models turned out superb, export time for me took 30min? My phone is an s24 ultra maybe that played a role too. However, u do make a point, in his video hes using premium version which also allows 200 photos to be taken. Free version only has 70 but produces excellent quality that can be easily cleaned up in blender
![[Tutorial] Epic Games RealityScan | Now on Android | Quality Photogrammetry With Your Phone](/img/n.gif)
Have you tried to make 3D models using this technique? Let me know how it went! 🙌
I have tried photogrametry technique using meshroom software
Created model to 3d Printer?
Yes, had two go's absolute rubbish, The second I made sure the BG was plain. still garbage.
It's subscription based. This communist parasitic ideology of sucking money out of people whether you use it or not is just revolving. doesn't matter how good the product appears it's still a theft and no matter of mental gymnastics can excuse that. Do you want to have emplty account, be poor and bleed out of thousands of little cuts? subscriptions are the fastest way how to destroy your budget and get nothing in return. And you can shove your exceptions to the rule up yours
When the scan fails this is also super useful because all you have to do is ... do it again. No additional infomation needed - awesome.
What a great video. Thanks for explaining how to use KIRI Engine so thoroughly!
HI, IS IT POSIBLE TO SOMEHOW CONVERT YOUR 3D MODEL TO A BLENDER MESH??
You can export from 3ds max to blender compatible file
Which output format should I use for posting and showing 3d data which allows rotate or zoom in/out in my website. Thank you
Love the Gears statue!
Great! 👍
this is an exceptional bit of information.... Thank you by the way....❤
How would you do it for large objects (eg. The "huge cliffs" you mention in the introduction)?
Sir can you tell me the highest system configuration for lumion 13 for Intel processor
Sir please tell me
Focus on getting the best GPU possible. Processor ain't that important for Lumion
You can go to google tape configuration of lumion 2023
If Kiri uses Gaussian Splatting, what is the difference between using own software and using it?
sir please make a tutorial on lighting and render 3d Floor plan cut section in Lumion and d5 render
Goes to the list. :)
waiting from very long time, Thank you@@NunoSilva3d
If you wanted to make an exact size replica, what would you do/use to size it properly?
Did you ever find out?
@@nodditiesoddities Nope.
@@nodditiesoddities mesaure the height IRL and scale the model to the same height
It is possible to use this tipe of scanning with mobil phone for reverse engineering ? It is accurate ? Thank you.
Good Video Nuno!
Thank you! :)
Greetings. can you share this model as only a mesh, without the colour map, the normal map nor the bump map.
How can I use the output product to 3D print / reproduce a simple object?
Thank you,
How can I done it in my app, in the client phone, and when the user confirms the final 3D object, then I store it on the server.
I want to create an app, that user can create the 3D object with capturing it with mobile camera, and then I take it and print it for them. (something like that)
Does anyone know how to resize the object? I need 2000 resolution.
I have gat s sony FX9 able to shoot raw dng. so i can generate single fotos with a film to speed up the capture process. Do you know tutorial to follow this way ? thanks a lot !
Thanks for this. I wonder if the age of the phone impacts the outcome? I have tried a number of scans on a Pixel 4a5g running Android 14, and so far have only gotten one scan that was even slightly recognizable. Several came out looking like kaleidoscope images. The initial photos are clear, but something in the processing went sideways.
If the camera quality is not the best, the results will reflect that. But you can use any other camera, and then upload on the site as well. Also, don't forget to be in a well lit area for the best results.
Thanks for the response, @@NunoSilva3d
I am unclear what is considered high quality in a camera these days, but the spec is: Pixel 4a 5G’s main camera module features a 12.2MP resolution with an f/1.7, 27mm lens. The 1/2.55" IMX363 sensor has been in use since the Pixel 3, and sports 1.4µm pixels. This combines with dual pixel PDAF and OIS for tried and tested reliable performance.
I have been in a room with overhead florescent lighting and using LED floods for additional light. It seems pretty bright.
I might try offloading and reloading the software and see if that helps. Then maybe try with a different camera.
You forgot to mention that you have to wait 12 to 24 hours to get the model. Unless you pay for the pro edition.
Thank you. In a next video about it, I'll be sure to mention all the pros and cons regarding each version.
@NunoSilva3d thank u for ur work, and I could be nice if you make that video thanks!
That’s true im doing my exam project now im waiting for long for results plus cutting😭
Hello, would you mind giving any clue as to how you would go about changing colors of the scanned objects?
Google😂😂😂😂
Nuno! Love this video. thank you for sharing your knowledge! Can you advise on the model of turntable you use please? Thanks again
Thank you, I think the Samsung phone scan was the best.
I liked it better too. :)
it's already done by Sony Xperia phone 3D Creator since 2018, even samsung already too late for this..
I didin't see any "samsung phone scane"on my samsung store. What is the apps name?
Thanks a lot for this detailed workflow! I do have a stupid question: how do you manage to make the Ikea plate stand still on your tripod? Like does it come with a screw ting or you did some work around it? Thanks again
It wasn't on a tripod, but on a chair.
Hi. Nice video. Could you 3d print from the scans?
Yes. You import it into your workspace and snap a mesh to it. Then you can 3d print it.
At least, that is my ignorant understanding of how it works.
That's my reason for getting the app too.
How is it supposed to figure out the objects size to duplicate a 3d scanned file? It doesnt mention this at all so its just for visual not an actual model.
For that you need other type of scanners. I'll make a video soon about it. Stay tuned.
Greatly explained. Thank you. 🤙🏿
Hey great video, I'm into CNC machining and I frequently need to make job files of small to medium -large sized objects on solid works, is there a way for me to scan the objects with LIDAR or photogrammetry on iPhones or Android with mm accuracy and export it to solid works?
Can you take these files and 3d print them?
@@daminiel1 I donno 😅 lemme know if you find out
3D printers typically take OBJ (the file that was exported in the video) and STL types.
The difference between the two file types is that OBJ tracks metadata, STLs don't.
Source: I'm a 3D printer 🙂
Hello there, have you found out about this? Thanks!
thanks this has been a phenomenal help and the app is absolutely fantastico!
You're welcome!
Can Lumion also make something like this?
Subscribed, thank you 👍
@@dalethomas360 thank you for watching! 🙏
Just bought a Kiri pro license. Great overview 🤙💯. One question, why can't I use a turntable in featureless models mode?
How much it cost u per month bro? Is usd?
JUST TRIED TO GET YOUR MODELS BUT GOT NOTHING
@@colossusenter1 could you send me an email with the subject 3d models to "hello at nunosilva.pt"?
Great video bro
Appreciate it!
on my fourth try , second time watching this video, I was trying to edit in meshmixer not many editing tools so important to get a good Model , to many rough edges and a hollow bottom so far.
Here's a question. I'm new to Nerf and photogrammatry. I found your tutorial educational. If I have made a scan, how can I share it from my website? Is that possible? Thank you in advance.
Thank you. well done tut.
Glad it was helpful!
Hi, yhanks for share, I imagine you showed paid version. ¿? ¿would I be able to import it to Inventor?
amazing video :)
Thank you! Glad you liked it. :)
Very cool video. Ty 😊
Great tutorial
Thanks! 🙏
Do i need the Pro Version?
You can use it for free.
I subscribed to your website to download the model and check its quality, but all I received was a simple 3D bread and a plant. I expected the model shown in your video.
Please send me an email to hello @ nunosilva.pt requesting it.
@@NunoSilva3d Got it! Thank you!
thank you so much for sharing bro
salam dari Indonesia
Thank you sir 🥰
Good job
wow 😍
Thank you! :)
Very cool, can you 3d print these scans? Subbed 👍
I was wondering the same on 3:49 you see the outlet files where you see the STL option. Which should be able to use for slicing software
@@Sergiosios cool thanks for that didnt see the stl
this app is free or paid?
You can use it for free with 3 scans limitation per week.
@@NunoSilva3d thx a lot...
I'll try it with old lead miniatures
Anyone else having issues with it loading on your phone? (pixel 6a)
I wish he would’ve shown the mesh without the textures on it. That’s the real meat & potatoes of any 3D scanning and super-important for reverse engineering and 3D printing.
Is Kiri engine is reliable??I have never subscribed anything like this..givin ur bank information..
"We just took a few photos" 200 photos in. 😅
Imagine if it was the analogue times. 😃
he never mentioned the Queuing the free version takes forever to render the images unless you pay 35.99 a year smh
Both takes some time, usually I just go do something else and come back to it after a while.
@@NunoSilva3d but your video showed it rendered right away because you have the paid version it’s a bit misleading that’s all
Nonetheless i just tried it out with horrible lighting and no turn table just on the floor and my models turned out superb, export time for me took 30min? My phone is an s24 ultra maybe that played a role too. However, u do make a point, in his video hes using premium version which also allows 200 photos to be taken. Free version only has 70 but produces excellent quality that can be easily cleaned up in blender
@@a2_zhongbaode718 yes I use it all the time it’s a really nice app none the less
Has anyone tried to 3d print using this
Wooowww
Yet another garbage phone app required that has dumb limitations unless you buy at ridiculous prices.