Can anyone help me setup the dji fpv controller 2 to this Drone, I have everything binded but I guess it's not setup on beta flight, I don't know how to get off the ground and information is very confusing from multiple sources.
Such fantastic points were mentioned! Its cheaper, you dont worry about it that much, therefore you do riskier maneuvers, better shots. Thats what it is all about! ;]
Do you recommend PNP no receiver and using the DJI radio? I have a DJI radio but I also have a Radiomaster pocket on the way for tinywhoops. Even if you buy elrs, you can still swap UART's in BetaFlight and fly it with either DJI radio or ELRS I would imagine.
This depends on the manufacturer. I don’t know for sure about iflight but sometimes when you get a version with a reciever the cable from the 03 is missing the yellow wire (SBUS) and the extra ground wire, brown I believe. So you would potentially need to replace that connector with a 6 wire one. I personally will only use ELRS, the only failsafes I’ve ever had in the hobby were using the DJI radio. All on the most recent firmware (within 6 months) and as soon as that happened couldn’t trust the link anymore, especially with a 5”.
Ive been using the dji rc 2 with my dji quads several years now and signal very good, in fact never lost signal, but have had return to homes on low battery, no problem. Ive got the radiomaster pocket but use the RC2 more. Does Rimsler use the RC2 ? I think he does
I use the Rc2 for convenience, the only issues you can get is that when you lose video a couple seconds later you lose rc signal and it's over, while elrs still has signal, but yet without video there is not much you can do except activate failsafe or throttle up in the air, but even then it takes a few seconds to gain back video, so I just use the DJI rc and try not to lose signal ahahah no problem so far! In this drone you either use elrs or DJI on stock wiring, you can solder another rc to a different uart tho and use both, but gotta switch them connecting to betaflight
My failsafes were close range, Causing me to crash into my truck. Happened twice, just can’t trust it anymore. Also the variable latency in the control link is again something I can’t trust. But if it works for you guys great! It is convenient that’s for sure
Im still new to it, but O3 video link is unmatched. It probably wasnt worth spending 450usd on goggles, then 230 per o3 to switch. But the money is spent now and now im in a different ecosystem. I want to use walksnail for night flying but ill probably end up moving away from walksnail all together. I think ill buy hdzero in the future for my small drones and race drones, and then continue dji for freestyle and cine. The video link is just so stable on O3.
really thank you again for such a great review of a new fpv drone. You are always THAT entertaining, presenting with charm and I love your accent :) Like this we can feel your love for FPV ! For me -> JUST the right time ... because I wanted to buy the Nazgul Evoque F5 V2 during the next week... but now I want to buy the DC5 Eco since 200 Euro cheaper and I really don´t need LEDs and side covers. For sure looks NICE holding it in your hands... but I want to FLY and during flight LEDs are just... not needed ! :) During night for sure great view, but IF I guess I could add some LEDS to the DC5 Eco as well :) I already own the Geprc Domain 3.6 O3 ... now it is time for a "bigger brother" :) 5 inch will be my "action cam" drone, Domain 3.6 my drone to have crazy fun without extra weight :)
Thank you for the kind words ☺️☺️ yes 5 inch is still the most versatile imho, gets power, efficiency, ability to carry and it's still portable! This one is a crazy deal
Such an amazing drone and what a flight, just a curiosity when you bought it did you selected "no RX I use DJI RC" or other options? I have DJI Radio 2 and your google DJI 2, I am beginner this Info would help me. Thanks
I love this drone. The only thing I changed was the direction of the motors. I like the props to go inwards towards the top and bottom, not the sides, with the exposed electronics.
I'm new to FPV drones. I'm interested in getting one but not sure what one to get and what ways I can improve for range and flight duration. How do you waterproof/water resist a drone. What about iFlights new Afterburner drone with a bottom battery mount. Thank you
In order to help you I'll ask a question: what's your goal in FPV? Is it the fun of the experience, being able to record, do you want to fly outdoor/indoor, do you want to get the best video, are you concerned about drone size?
If I were to build my own using the same electronics but using the better xing2 2207 motor, can the ESC handle the motors? Surprisingly the xing2 2207 is cheaper then the xing E motor in my area
Looks like a really good quad great price and the 03. Not bad. I think I’ll stick with my old Nazgûl xl5 true X tho. Has similar power/ flight systems and handles a lot like this one. It’s the tune. Iflight always delivers very well tuned bind and fly’s. I could tell you were feeling it:) Nice maiden. Thanks for the Rimzler report.
Can i fly this drone using my Dji remote controller 3 and googles 3 from Dji avata 2? Is the biding process easy or complicated? Many thanks for great videos . Thumbs up for UK.
Hello my friend, I have a specific question and I noticed your holder for the DJI Osmo Action 4 and I would like to have one too. Where did you get it? If you have printed it yourself, do you have a file for it? All the best greetings and always have a good flight bigkahuna 😊
As a newbie, should i start with taht or avata 2? My understanding is rhat avata will be easier to control and has the get back home failsafe, while this oke will make more sense after some experience. Choices choices
@@Rimzler Io non sto in Italia ma il prezzo mi viene sempre quello. La dogana poi va pagata a parte, quello sul sito è solo il prezzo del prodotto escluso di spedizione e tasse varie. Che fregatura 😭
The real problem is: where i can buy this drone at his original price? if i change the state on iFlight website it update the price in euro, and in euro the prince is the same as the F4 Evoque version, not 399$. And that's a problem and a shame because i really want to pick a nazgul like this one T_T
@@Rimzler Thanks. But for this particular unit I just need DJI FPV Goggles V2 or DJI Goggles 2 and remote controller? Sorry for such dump questions, I have Mavic 3 but never used to custom FPV drones
nice video, but one question, is it possible to connect the quad with the dji goggles 3 smd the controller 3? sry I'm new in the game and only bought the avata 2 set and dont really wanna buy new goggles or controller 😅
from what i can tell "also new in the game" the goggles 3 can only use dji 04 system, this is o3, but i think dji is coming out with update to make it be able to use 03. i went with goggles V2 because i wanted to get digital 03 system compatable ut also have option to install analog adapter which the goggles 2 and 3 are only digital
Looks like a nice little beast. I don’t have a 5 inch so might have to look into this one. Have you ever had an issues getting PNP and using the Dji Remote? I’ve seen a few vids where folks said don’t do it as if you loose video you loose radio also and it just drops? I have Crossfire and Tango 2 for my 6”Bob57 and 3.6” Domain, but might just get this 5” with the Dji remote as I still have spare Dji rc2 in my old drones bag.
Drones usually come in a few versions: analog goes with any analog goggle, DJI digital goes with DJI goggles, most commonly the goggles V2, goggles 2 and goggles Integra, let me know what you are interested about and I'll guide you!
I decided to go for v3 because the "eco" for me never sounds right. Gonna be my first 5" - i mostly fly tinywhoop but I learned how to do inverted yaw spin so I think I'll handle 5 inch power
This is my first real fpv drone (unless you call Dji Avata a fpv drone?!?), i bought with gps module and analog. I am going to put a DJI Mini 3 to this and use it as a 4k gimbal camera, and I got Dronemask 2 with RC-N1 FCC enabled with 1080p.
Ahahahahahha I always select a few drones for working, right now I have the Flylens85 as 2s indoor or stealth outdoor, the cinelog 35 for GoPro carry indoor and urban, avata2 for most stuff, and this Is the 5 inch for outdoor
Another first-class video from you. I like your kind of testing, you're honest and it shows. Either you're excited or you're not. Very entertaining 🦾😊
Solid video, this convinced me to get this drone. Gotta say, your flying is inspiring. Love the style. :)
Amazing choice, this is my recommended O3 5 inch! Thank you ☺️☺️
6:00 This move was just sick and you was still able to talk while doing it, incredible :D
Ahahahahha I'm just improvising and trying not to crash😂😂
Can anyone help me setup the dji fpv controller 2 to this Drone, I have everything binded but I guess it's not setup on beta flight, I don't know how to get off the ground and information is very confusing from multiple sources.
Send me a dm on Instagram, send picture of the receiver tab on betaflight
I was just came back here to hit the 500 👍 Thanks mate, awesome content
- recent Nazgul DC5 ECO owner!
Man you really have great videos! Thanks!!!!
Thank you for watching!
AtomRC has the hurricane 5 drone which maybe even a little cheaper. Nice to see budget drones back again
Gotta check it out, thanks for the tip!
Yup I have one but I can tell that this nazgul is a better flyer
Such fantastic points were mentioned!
Its cheaper, you dont worry about it that much, therefore you do riskier maneuvers, better shots.
Thats what it is all about! ;]
Great video! I'm liking this one from iFlight with just the basics ready to go. Sometimes less is more 🍻
Do you recommend PNP no receiver and using the DJI radio? I have a DJI radio but I also have a Radiomaster pocket on the way for tinywhoops.
Even if you buy elrs, you can still swap UART's in BetaFlight and fly it with either DJI radio or ELRS I would imagine.
This depends on the manufacturer. I don’t know for sure about iflight but sometimes when you get a version with a reciever the cable from the 03 is missing the yellow wire (SBUS) and the extra ground wire, brown I believe. So you would potentially need to replace that connector with a 6 wire one. I personally will only use ELRS, the only failsafes I’ve ever had in the hobby were using the DJI radio. All on the most recent firmware (within 6 months) and as soon as that happened couldn’t trust the link anymore, especially with a 5”.
Ive been using the dji rc 2 with my dji quads several years now and signal very good, in fact never lost signal, but have had return to homes on low battery, no problem.
Ive got the radiomaster pocket but use the RC2 more.
Does Rimsler use the RC2 ? I think he does
I use the Rc2 for convenience, the only issues you can get is that when you lose video a couple seconds later you lose rc signal and it's over, while elrs still has signal, but yet without video there is not much you can do except activate failsafe or throttle up in the air, but even then it takes a few seconds to gain back video, so I just use the DJI rc and try not to lose signal ahahah no problem so far!
In this drone you either use elrs or DJI on stock wiring, you can solder another rc to a different uart tho and use both, but gotta switch them connecting to betaflight
My failsafes were close range, Causing me to crash into my truck. Happened twice, just can’t trust it anymore. Also the variable latency in the control link is again something I can’t trust. But if it works for you guys great! It is convenient that’s for sure
mine comes in on two days, cant wait to fly it!
😍😍😍😍😍😍😍
Seems amazing! Great review. Thank you :)
Thank you so much!☺️
Great stuff man! I just switched over to DJI O3 from Walksnail and its like I have a new realm of products to get excited over hahaha.
What do you like more between the 2 systems?
Im still new to it, but O3 video link is unmatched. It probably wasnt worth spending 450usd on goggles, then 230 per o3 to switch. But the money is spent now and now im in a different ecosystem. I want to use walksnail for night flying but ill probably end up moving away from walksnail all together. I think ill buy hdzero in the future for my small drones and race drones, and then continue dji for freestyle and cine. The video link is just so stable on O3.
I like your approach and your flying.
Thank you so much!☺️
really thank you again for such a great review of a new fpv drone. You are always THAT entertaining, presenting with charm and I love your accent :) Like this we can feel your love for FPV ! For me -> JUST the right time ... because I wanted to buy the Nazgul Evoque F5 V2 during the next week... but now I want to buy the DC5 Eco since 200 Euro cheaper and I really don´t need LEDs and side covers. For sure looks NICE holding it in your hands... but I want to FLY and during flight LEDs are just... not needed ! :) During night for sure great view, but IF I guess I could add some LEDS to the DC5 Eco as well :) I already own the Geprc Domain 3.6 O3 ... now it is time for a "bigger brother" :) 5 inch will be my "action cam" drone, Domain 3.6 my drone to have crazy fun without extra weight :)
Thank you for the kind words ☺️☺️ yes 5 inch is still the most versatile imho, gets power, efficiency, ability to carry and it's still portable! This one is a crazy deal
Such an amazing drone and what a flight, just a curiosity when you bought it did you selected "no RX I use DJI RC" or other options? I have DJI Radio 2 and your google DJI 2, I am beginner this Info would help me. Thanks
You should select no Rx I use DJI rc, that way the drone comes wired correctly!
Appreciate the question and the answer!
Great vid, love your content. thx for your review, i am very interested in the pov world. thank you for your insides on the topic.
Thank you for tuning in!☺️
Hi, can you tell me the beta configuration for use with the DJI RC2? Thank you
Ciao ma come frame l’AOS è molto meglio?
Acquistando un o3 con sistema eslr posso usarlo sia con dji fpv controller che con una radio eslr?
Not my first video of this drone, but first time seeing such flying. Wow man! 😂
I love this drone. The only thing I changed was the direction of the motors. I like the props to go inwards towards the top and bottom, not the sides, with the exposed electronics.
Do you think it’s possible to install the evoque sidepanels on the eco or from another typ of nazgul?
If you have the o3 version maybe, but better 3d printing the side panels imho, the custom ones don't have much tolerance
I'm new to FPV drones. I'm interested in getting one but not sure what one to get and what ways I can improve for range and flight duration. How do you waterproof/water resist a drone. What about iFlights new Afterburner drone with a bottom battery mount. Thank you
In order to help you I'll ask a question: what's your goal in FPV? Is it the fun of the experience, being able to record, do you want to fly outdoor/indoor, do you want to get the best video, are you concerned about drone size?
Im looking wt the i flight defender 16, is it still a good buy or is there somthing better? Mainly inside but some outside stuff
Maybe dji are offloading o3 air units wholesale because the o4 is on the way soon
Daamn didn't think of it, maybe that's why they got it this cheap
best price to performance drone 🔥
If I were to build my own using the same electronics but using the better xing2 2207 motor, can the ESC handle the motors? Surprisingly the xing2 2207 is cheaper then the xing E motor in my area
Yes the escs are plenty
Looks like a really good quad great price and the 03. Not bad. I think I’ll stick with my old Nazgûl xl5 true X tho. Has similar power/ flight systems and handles a lot like this one. It’s the tune. Iflight always delivers very well tuned bind and fly’s. I could tell you were feeling it:) Nice maiden. Thanks for the Rimzler report.
Yeah I had a V2 and it was performing perfectly, all 5 inch iFlight bnf are always great feeling!
Thank you for tuning in!
Can i fly this drone using my Dji remote controller 3 and googles 3 from Dji avata 2? Is the biding process easy or complicated?
Many thanks for great videos . Thumbs up for UK.
Hello my friend, I have a specific question and I noticed your holder for the DJI Osmo Action 4 and I would like to have one too. Where did you get it? If you have printed it yourself, do you have a file for it? All the best greetings and always have a good flight bigkahuna 😊
I have designed it myself, send a mail to rimzler.tech@gmail.com I'll give you the STL!
As a newbie, should i start with taht or avata 2? My understanding is rhat avata will be easier to control and has the get back home failsafe, while this oke will make more sense after some experience. Choices choices
great review, looks like a great wee quad too, well done iflight i think you will sell a lot of these
Hi, why do you use gopro cases on your drone instead of just using the stock gopro mounted flip-out feet to attatch it?
ma come 399 dollari? Sul sito costa 479,90 euro senza rx e gps. dove sta in vendiuta a quel prezzo?
Sul sito internazionale 399, purtroppo in Italia va pagata la dogana
@@Rimzler Io non sto in Italia ma il prezzo mi viene sempre quello. La dogana poi va pagata a parte, quello sul sito è solo il prezzo del prodotto escluso di spedizione e tasse varie. Che fregatura 😭
The real problem is: where i can buy this drone at his original price? if i change the state on iFlight website it update the price in euro, and in euro the prince is the same as the F4 Evoque version, not 399$. And that's a problem and a shame because i really want to pick a nazgul like this one T_T
maybe Aliexpress
In the official website you can buy it in dollars
and then change to euros
It cost me $509 after tax for the version with crossfire, and GPS preinstalled.
@@Nincompoop69where are you from?
@@willylliw7 just bought from the original website, i believed in Rimzler's words! Now i have to wait!
Nice! Would definately get if Walksnail was option as BNF. Great review 💥💥
Thank you so much! Walksnail is leaping, will be a very common option soon!
Do I need to buy other DJI stuff separately? Is it hard to pair all elements?
Yes you would need to buy the radio and goggles separately, DJI stuff is easy to pair but make sure to get compatible stuff
@@Rimzler Thanks. But for this particular unit I just need DJI FPV Goggles V2 or DJI Goggles 2 and remote controller? Sorry for such dump questions, I have Mavic 3 but never used to custom FPV drones
the esc is great, you can easy unsolder motors without taking away the top plate
What remote you using?
really nice one, do you think that with a 4s lipo is more domable for a beginner? what do you think about ovonic lipo?
You cant pair this with the new dji goggles ?
Not yet, at least they made the old compatible with avata 2
nice video, but one question, is it possible to connect the quad with the dji goggles 3 smd the controller 3? sry I'm new in the game and only bought the avata 2 set and dont really wanna buy new goggles or controller 😅
from what i can tell "also new in the game" the goggles 3 can only use dji 04 system, this is o3, but i think dji is coming out with update to make it be able to use 03. i went with goggles V2 because i wanted to get digital 03 system compatable ut also have option to install analog adapter which the goggles 2 and 3 are only digital
Does it have remote id?
No it doesn't
Looks like a nice little beast.
I don’t have a 5 inch so might have to look into this one.
Have you ever had an issues getting PNP and using the Dji Remote?
I’ve seen a few vids where folks said don’t do it as if you loose video you loose radio also and it just drops?
I have Crossfire and Tango 2 for my 6”Bob57 and 3.6” Domain, but might just get this 5” with the Dji remote as I still have spare Dji rc2 in my old drones bag.
I thought you said BestBuy was selling that Quad. LOL 😂
😂😂😂😂 one day FPV will be that mainstream
I bought this, but I got the 2.5 W VTX and it’s analog and it’s all good since I’ll be running a GoPro on top
Very nice review.
Is it possible to use an bigger batery and do some mild range flygth ? ( aiming more than 5 minutes, perhaps 8 or 10 minutes ?)
Why is there two camera views? Can someone explain?
The smaller camera view is what he sees through the googles live and the other one is recorded footage from the camera which is higher quality
Nice video, where I can buy that battery!!!
Rimzler do you use the DJI controller with the O3 ?
Yes, I find It the most convenient, especially now that is compatible with avata 1 and 2
In case of fail safe, how does it behave with this controller? It pays to have GPS, otherwise you lose it, right?
Buena revisión, como siempre! .Has tenido algun problema al conectarlo a betaflight ?
No problems at all, just plugged the cable and was working!
@@Rimzler gracias 👍🏻
Interesting, will you make review for rekon Y6
"I'm not a pro pilot" 😂😂
Ahhaha there are much better pilots than me😂😂
Where you buy this dron for 399USD ????
in the official website
@@willylliw7 But in China? Or Europe. Because I can not find on official europian www on this price. Maybe only in China.
@@maciejbabinski460 buy It in the official website by dollars and send It to an european country
@@willylliw7What's the point? You will have to pax taxes anyway and that's gonna rise the price waaaay high
@@silver_steam yes? Okay so then on AliExpress is 430€
with how much mW do you fly?
Hey just wondering how i know which goggles go with what drone?? or do they all connect each one? also same with the controller?
Drones usually come in a few versions: analog goes with any analog goggle, DJI digital goes with DJI goggles, most commonly the goggles V2, goggles 2 and goggles Integra, let me know what you are interested about and I'll guide you!
Convince to buy the drone because of your review
nice drone friend!!! How long can this battery last?
The 1800mah 6s I use can go probably 8 minutes and more if you just cruise
is tis wort it for a beginer
i am a beginner is tis good for first drone
I decided to go for v3 because the "eco" for me never sounds right. Gonna be my first 5" - i mostly fly tinywhoop but I learned how to do inverted yaw spin so I think I'll handle 5 inch power
When I jumped from a tiny whoop to a 5 inch and did my first launch, it took off like a rocket and I nearly shit myself. Good luck😂
Great flying and a nice kwad.
Mine just came in last week, I love it. I’m buying a couple more for backup! Need more batteries!
Ahahahha glad you like it! One of my favs this year
Awesome hope we can get that in England
This is my first real fpv drone (unless you call Dji Avata a fpv drone?!?), i bought with gps module and analog. I am going to put a DJI Mini 3 to this and use it as a 4k gimbal camera, and I got Dronemask 2 with RC-N1 FCC enabled with 1080p.
Sei italiano?
For Portugal its 477€ :(
Daaamn eu or international website
@@Rimzler EU website
@@Rimzler what if i buy to eu from the international website?
Ottima scelta, a che prezzo in Italia?
L'ho ordinato direttamente da iFliggt, in più vivo all'estero ma già lo store europeo ti carica 100 sacchi in più....
@@Rimzler Lascia perdere... 510 euro in europa... senza gps
I was gonna order but when i check its 479€ totally different 🤣
Europe and taxes...😓
You must have a very big backpack!😂
Ahahahahahha I always select a few drones for working, right now I have the Flylens85 as 2s indoor or stealth outdoor, the cinelog 35 for GoPro carry indoor and urban, avata2 for most stuff, and this Is the 5 inch for outdoor
I am sold!
This is a trigger to get a drone license, because of this drone"
Ahhahahahaahaha
Drone license 🤓🤓🤓
@@Rimzler I just passed the test ,now I can fly anything that over 250g, thanks for your pushing>
Congrats!🚀🚀
The ones putting the rules dont even know the rules, figure
Like your content but this drone with gps is 500.99 in USA
Some places apply taxes over it, varies where you are
Its good they sent the 🥜
All the comments from 4 months agp. Guys!! This drone costs now 220$ instead of 400… i think ill take this one begore i build my own then
6:28 CREAMY….lol
You live so pretty
Ahhaahha I love being in the countryside
“I’m not a pro pilot” 😒 … then I’m not even a beginner 😂
Ahhahahaha I see people doing crazy stuff lol
Do you fly with 25mW