Jessie as a non board level iPhone dyi-er repair I appreciate you sharing your knowledge before I attempt board level repair. Keep up the great content.
Hey jesse! I've seen an issue like this with the 4gb NAND Xbox 360, Its basically where the write function on the NAND fails, but the nand will still read no problem. great video buddy! :)
Hi there great video and thank you for the information. I have the same issue however it's the 4013 error. You mentioned this within the video a few times. Will you be doing a video to cover this type of issue also. Many thanx
Hello I totally watched your video I have a question The old hard drive was not read by JC and you dropped the new hard drive and then after turning on the phone, it entered the serial number and Wi-Fi and Bluetooth serial number. Where did you get the serial number and Wi-Fi and Bluetooth serial number of the broken hard drive and insert it into the new hard drive?
I hope you can reply I have an issue with my iPhone plus it works but sometimes it will get stuck on the ( black wheel of death ) loading screen with white wheel and keeps rebooting, and when I go to safari it says ( sorry this webpage couldn't be reloaded ) and when I delete a photo or video it appears back and I can't access no apps neither make a video, my iPhone is on iOS 16.0 beta I think would you could help me solve my issue 🙏🙏🙏🙏
Hey jessie, my iPad 8 got error 9 and when i gave it to fixer he said the small pads on the motherboard under nand chip are damaged can they get fixed ? And when i gave it to second fixer he said its the cpu problem what should i do im confused plz help 🙏🏻❤️
Did the hard disk need to be replaced? Could the hard disk be repaired with a programmer? That way we can use the same hard disk if we don't have any laying around?
@@VCCBoardRepairs sorry that is what I meant. The NAND, is it possible to remove it and flash (repair) it with a programmer? And use the same Nand? Or is replacing the only option? Since it's only data corruption and not physical damage.
Do you know what NAND Apple are using in latest devies? I noticed that NANDS in Air 5, iPhone 14 (Pro), Apple TV 4k 2022 are smaller than let's say Air 4, iPhone 13 (Pro) and so.
Hi, my iPad7 does not charge and it does not turn on. The nand voltages (1.8, 0.9 and 3.3) are unstable...the other voltages seem ok....any ideas? Thanks
@@VCCBoardRepairs thank you for your answer, I just retested but I no longer have all the voltages arriving at the nand...I have the main vcc and the bat vcc and also the 1.8v always from the U8100. Maybe the 8100 hs or more likely the cpu? thanks again
Hi Jessie! You mention about rotation after nand replacement. I tried to upgrade my iphone 11 pro 64gb to 256gb, but unfortunately first the 256Gb nand was pulled from iphone x, so i can't use it. secondly I damaged my original nand. I recover my phone with JC P13 used unbinding an other 64Gb nand from iPhone 11 donor board, so get my phone original SN and wifi/bt data. But after all repair process phone working just my taptic engine vibrating loudy and have problem with orientation. Do you know how can I fix this issue?
You have to write a generic SYSCFG from JC software. Select the model on the left & click "WRITE SYSCFG" Then edit the SN, WiFi, BT, model, color info and restore again
the lcd digitizer tip is good. but BE CAREFUL because if that lcd slides over and touches any exposed tesa or something, you are gonna need a new lcd xD trust me. also, if you have any ways to clean tesa residue from an lcd without destroying the lcd, lmk :)
Jessie as a non board level iPhone dyi-er repair I appreciate you sharing your knowledge before I attempt board level repair. Keep up the great content.
Appreciate it! Thank you so much
Hey jesse! I've seen an issue like this with the 4gb NAND Xbox 360, Its basically where the write function on the NAND fails, but the nand will still read no problem. great video buddy! :)
Ah nice! Thanks for the support!
thanks for your videos on removing underfill and replacing smd components, i successfully replaced an U3700 camera power ic!
That's awesome! Congratulations!
Great work as always, I was wondering if someone used these same Serial, bluetooth, wifi numbers could he activate his iPad?
Depends if it's already logged into iCloud
Hi there great video and thank you for the information. I have the same issue however it's the 4013 error. You mentioned this within the video a few times. Will you be doing a video to cover this type of issue also.
Many thanx
I have one already. But was unsuccessful: ua-cam.com/video/gqajfY6f7CA/v-deo.html
@@VCCBoardRepairs much appreciated for the reply. I will definitely check this out. Thank you
Great video jese
I have a question from where you get the sn and wiif address
Check video description
Hey bro do you have any solution Our tricks for LCD problem After change Nand
where can i buy the nand
Thanks a lot for this great content.
How did you get the SN, Wifi and bluetooth though?
aliexpress
Contact Wayne Bonnici for a new SN: m.me/waynebonn13
how to get to the original WiFi and BT serial number if the ipad has 4G?
Hello
I totally watched your video
I have a question
The old hard drive was not read by JC and you dropped the new hard drive and then after turning on the phone, it entered the serial number and Wi-Fi and Bluetooth serial number.
Where did you get the serial number and Wi-Fi and Bluetooth serial number of the broken hard drive and insert it into the new hard drive?
You can buy from many places. But this only works for iPad 7 wifi model in this case
Thanks Jesse.Pls do you know if paul Daniels flex board view software can open bvr files on Windows computers?How can I buy the software in Nigeria?
Contact Paul Daniels for support 😅
Jessie is that the T3B With T115 Handle+3 Tips you using.
It's T210 with Knife tip
hey, where do you get clean serial numbers for ipads for repairing dead nand?
You can now recover the serial info using JC P7 and JCID Drawing Software
what if we write those numbers down
i mean /sn /wifi /Bluetooth
at the time we buy the device
Yes but no one will do that lol
I hope you can reply I have an issue with my iPhone plus it works but sometimes it will get stuck on the ( black wheel of death ) loading screen with white wheel and keeps rebooting, and when I go to safari it says ( sorry this webpage couldn't be reloaded ) and when I delete a photo or video it appears back and I can't access no apps neither make a video, my iPhone is on iOS 16.0 beta I think would you could help me solve my issue 🙏🙏🙏🙏
gracias hermano, actualmente tengo una igual
Hojala si la arreglaste
Hey jessie, my iPad 8 got error 9 and when i gave it to fixer he said the small pads on the motherboard under nand chip are damaged can they get fixed ? And when i gave it to second fixer he said its the cpu problem what should i do im confused plz help 🙏🏻❤️
Sadly, it sounds like the iPad is damaged beyond repair
Did the hard disk need to be replaced? Could the hard disk be repaired with a programmer? That way we can use the same hard disk if we don't have any laying around?
The NAND was replaced because it went bad
@@VCCBoardRepairs sorry that is what I meant. The NAND, is it possible to remove it and flash (repair) it with a programmer? And use the same Nand? Or is replacing the only option? Since it's only data corruption and not physical damage.
I heard it's possible but I would rather replace it to ensure a reliable repair
Do you know what NAND Apple are using in latest devies? I noticed that NANDS in Air 5, iPhone 14 (Pro), Apple TV 4k 2022 are smaller than let's say Air 4, iPhone 13 (Pro) and so.
Yes BGA 315
@@VCCBoardRepairs TLC? What's the difference? More modern or? Thanks!
No idea lol
Hi, my iPad7 does not charge and it does not turn on. The nand voltages (1.8, 0.9 and 3.3) are unstable...the other voltages seem ok....any ideas? Thanks
Probably CPU issue
@@VCCBoardRepairs thank you for your answer, I just retested but I no longer have all the voltages arriving at the nand...I have the main vcc and the bat vcc and also the 1.8v always from the U8100. Maybe the 8100 hs or more likely the cpu? thanks again
Great stuff 🎵🔥
Thanks 🔥
Hi Jessie! You mention about rotation after nand replacement. I tried to upgrade my iphone 11 pro 64gb to 256gb, but unfortunately first the 256Gb nand was pulled from iphone x, so i can't use it. secondly I damaged my original nand. I recover my phone with JC P13 used unbinding an other 64Gb nand from iPhone 11 donor board, so get my phone original SN and wifi/bt data. But after all repair process phone working just my taptic engine vibrating loudy and have problem with orientation. Do you know how can I fix this issue?
You have to write a generic SYSCFG from JC software. Select the model on the left & click "WRITE SYSCFG"
Then edit the SN, WiFi, BT, model, color info and restore again
Thank you the quick answer! I didn’t do that when prepare the new NAND.
I did it and now phone work properly. Other question. NAND is locked to phone models. It’s possible to unlock for use other model?
what brand microscope ?
Parco
You can find it here
Www.vccboardrepairs.com/gear
if i get an error 4013 initially and then tried fix flash i now get error 1101, is it a NAND problem?
Probably CPU
@@VCCBoardRepairs sorry its actually... error 1110... typo haha. It gets stuck on 18% sending kernel cache on 3uTools
who is this Phil guy you keep talking about and why are you trying to get under him? UnderPhil, I don't get it xD
🤣🤣🤣🤣🤣
the lcd digitizer tip is good. but BE CAREFUL because if that lcd slides over and touches any exposed tesa or something, you are gonna need a new lcd xD trust me. also, if you have any ways to clean tesa residue from an lcd without destroying the lcd, lmk :)
I've never had that issue
Hi ! Who’s doing shit like this in Miami , Florida? I have a 9 generation that won’t restore but there’s no error code .
I can help. Send me a message for a quote: www.vccboardrepairs.com/contact-us
@@VCCBoardRepairs I texted you
bro it's cpu problem , after few days same problem will come
No it's not
Okay gud job👍 , anyway ip box will detect this type error 9 nand, also u will get old data sn wifi bt
Bro where u get sereal and mac address and wife address