This is my favourite build. Why, because you dare to be different and its not a barra. Also its a true 2k build unlike some others where expensive parts are deemed worthless. Best of luck boys. Go get em.
@@MrMysto , yes the donated parts deemed worthless or $50 is a joke. What about a LS1 that is worthless. Over here your lucky to find a LS1 running for 2k, let alone rebuilding and working one to do 12's.
@JasonKelly-o8i I'm happy to buy all of Scotty's parts for my barra at the full retail 2k challenge, I'll give him 2 k cash - I bet he wouldn't take it
What a brilliant couple of lads you are... This is prime UA-cam, and genius car building... I just love this, and I wish I could be there to help... Keep it up, lads!
And you can clean all the pistons rings everything with it and will all come out like brand new bit of molasses and water even if it's hardened or been induction harden it doesn't soften it at all
Little bit disappointed lads! Did not think it was bodgey enough. Bit better technique with 3 stone & after opening ring gaps finish with fine file would have called that a decent speed rebuild like we did 20 years ago lol
🤣🤣 We will try to be more bodgey next time! Good tip on the fine file! This gives me some confidence that the engine might live (until we add 1 too many psi)
I actually did finish the rings with a file, but we are on a massive time crunch, so that part didnt end up filmed unfortunately. As for the honing, im certainly no engine builder 😂 it will be fine though, the bores are far better than when we got it.
@@ShaunDavis-jl6fr thanks mate. I hope it turns out as good as we are thinking. Even if it doesn't, the whole build has and will continue to be an excellent learning opportunity for us.
The carbon can lead to hot spots, which can introduce pre ignition. Also i dont want bits flaking off into the engine as i assemble it. Not that it matters, the engine is here for a good time, not a long time haha
Bronsons engine builder mate had kittens when Bronson told him I was going in dry 😂 So i finish honed the bores wet off camera to keep him happy. Just dont look too closely at the crosshatching angle haha
Your joking the music how can 1 watch this i was finding it was about motor build not music video and what makes you think every 1 like that music eny way your vid you can watch all that goodness ta ta
If you can't even use punctuation, you can't complain about the music. Have you ever tried making UA-cam videos? You can only use certain non copyright music. So the music options are limited. 99% of viewers prefer something in the background so that it's not dead silent. You obviously can't comprehend any of this though, so your not the kind of person we want on our page anyway. Good day to you!
Imagine life being so good that the only thing you have to bitch about is the music on a FREE video you’re watching… Don’t let the door hit you in the ass on your out😂😂
@house-ofhoon you find it funny lol your chan not mine play all music you whant but not every 1 whants to listen to music and the music you play even if you put johnny cash on still prefer no music
This is my favourite build. Why, because you dare to be different and its not a barra. Also its a true 2k build unlike some others where expensive parts are deemed worthless. Best of luck boys. Go get em.
Thankyou very much for the kind words mate! Were going to do our best to go and get those other guys!
I know right some blokes got a 5ltr vs Ute that’s camed etc like are you for real
Agree Scotty’s builds already 3 k easy, the mini spool was a joke - then there’s donated parts
@@MrMysto , yes the donated parts deemed worthless or $50 is a joke. What about a LS1 that is worthless. Over here your lucky to find a LS1 running for 2k, let alone rebuilding and working one to do 12's.
@JasonKelly-o8i I'm happy to buy all of Scotty's parts for my barra at the full retail 2k challenge, I'll give him 2 k cash - I bet he wouldn't take it
Out Of All of the 12's for 2K builds on the Tube this is the one that interests me the most. Sturdy Effort Gentlemen
Great to hear your liking it mate!
What a brilliant couple of lads you are...
This is prime UA-cam, and genius car building...
I just love this, and I wish I could be there to help...
Keep it up, lads!
Appreciate the kind words mate, means a lot!
Top effort on the engine "rebuild" 😆 Cameron, I'm sure it will perform it's duties and stride like no other V6 out there. Cheers from cunzy.
These engines are bloody brillant and make great power even N/A
Absolutely mate! Keen to see what this puppy can do 😁
I have been waiting days to see an update on this build, thanks 🙏
Thanks for being patient mate!
Lol love it, I hope it holds together!!!
Thanks mate! We've got our fingers crossed 🤞
Needs more re-used TTY head bolts, copper spray the old MLS head gasket and polished journals with a shoelace 👌 love me some ghetto spec builds
Ghetto or nothing! 💪
And you can clean all the pistons rings everything with it and will all come out like brand new bit of molasses and water even if it's hardened or been induction harden it doesn't soften it at all
Good to know, thanks!
@house-ofhoon any metal rusty, carbon buildup, oil and thing 24to72 hours full clean looking brand new and doesn't impact the material in any way
I'm running a 265 hemi. A barra has no chance
Up the Hemi! Barras are gonna have a bad day!
Wombat (Cameron) has spent his whole life of dodgy car projects building to this build. This is gonna be gooooood! 😁😁😁
Haha couldn't agree more! 🤣
Love it! Loose is Fast!
Haha hell yea mate!
What is this too much assembly lube you speak of?
Just remember to toss the Filter after the initial 20 mins run time!
Mybad. Never too much lube!
100% will most likely forget 🤣
Shouldve went the older 3 litre, they handle boost very well and non interference engine, all good though
Beggars can't be choosers unfortunately. Also, part of our problem is getting the big turbo on boost, which the extra capacity helps with.
Little bit disappointed lads!
Did not think it was bodgey enough.
Bit better technique with 3 stone & after opening ring gaps finish with fine file would have called that a decent speed rebuild like we did 20 years ago lol
🤣🤣 We will try to be more bodgey next time!
Good tip on the fine file! This gives me some confidence that the engine might live (until we add 1 too many psi)
I actually did finish the rings with a file, but we are on a massive time crunch, so that part didnt end up filmed unfortunately.
As for the honing, im certainly no engine builder 😂 it will be fine though, the bores are far better than when we got it.
@MRMOPARMAN0426 all good no criticism as do think this project will turn out well & something different is always a good thing.
@@ShaunDavis-jl6fr thanks mate. I hope it turns out as good as we are thinking.
Even if it doesn't, the whole build has and will continue to be an excellent learning opportunity for us.
Anything Steel drop it in molasses and water mixed together animal come up like brand new and it won't fuk with the metal
Yea molasses is good stuff! Cameron used that on his RB block 🤙
Thanks for the tip. I thought molasses was only good for rust! Ill give it a try on one of our future projects.
Ahahahahaha 6g better than barra 😂😂😂 YESSSS THEY ARE!!!
Haha everyone knows it!
Is that why they use so much oil and blow so much smoke. All mine went well for na but you need to tow a trailer with a 44 gallon drum of oil
🤣🤣🤣 my daily Magna doesn't blow smoke and only loses oil from the usual Magna leaking spots haha. Good engines 😁
Definitely don't remove carbon. It's your friend for insulation.
It's arguably a liability though 🤷
The carbon can lead to hot spots, which can introduce pre ignition. Also i dont want bits flaking off into the engine as i assemble it.
Not that it matters, the engine is here for a good time, not a long time haha
Dry honing, that’s so ghetto. Lube would have been your friend, but oh well.
Sometimes you've just gotta go in dry!
Bronsons engine builder mate had kittens when Bronson told him I was going in dry 😂
So i finish honed the bores wet off camera to keep him happy.
Just dont look too closely at the crosshatching angle haha
Your joking the music how can 1 watch this i was finding it was about motor build not music video and what makes you think every 1 like that music eny way your vid you can watch all that goodness ta ta
If you can't even use punctuation, you can't complain about the music.
Have you ever tried making UA-cam videos? You can only use certain non copyright music. So the music options are limited.
99% of viewers prefer something in the background so that it's not dead silent.
You obviously can't comprehend any of this though, so your not the kind of person we want on our page anyway.
Good day to you!
@@house-ofhoon I’m going to like and subscribe just for your reply! Keep killing it 🤙🏽💪🏽
Imagine life being so good that the only thing you have to bitch about is the music on a FREE video you’re watching…
Don’t let the door hit you in the ass on your out😂😂
Haha cheers mate!
@house-ofhoon you find it funny lol your chan not mine play all music you whant but not every 1 whants to listen to music and the music you play even if you put johnny cash on still prefer no music