How to replace rear main seal on Mercedes Benz W210
Вставка
- Опубліковано 6 вер 2024
- More Mercedes-Benz videos: mohecta.com
Hello guys and welcome to my channel! In this videos, I want to share with you how to replace rear main seal on Mercedes Benz W210 with the Mercedes-Benz rear main seal tool the right way to prevent leaks in the future. If you like my uploaded videos, please like, share, comment, and subscribe for more future videos. Thanks for watching!
Great job. Imagine you have to do this in your garage with a few jack-stands. I had a guy replace the rear main seal on my 1989 Jaguar XJ6 in my garage years ago. It was quite challenge, but he pulled it off.
It did not appear that the flywheel was installed according to the WIS. Using new bolts, torque to 45NM, then 90 degrees. Requires using the flywheel holding tool (remove starter to use tool). WIS: BA03.30-P-1002-01D Notice that he is trying to torque them, but the flywheel is moving.
Welcome to the real world
This is similar to how I did it. I too used the Mercedes rear seal install tool, but I used the tool with an arbor press and pressed the seal in the cover first. Then I used the tool to install the cover and seal as a complete assembly. This worked perfectly. When using this tool to press on the new seal you MUST make sure the two bolts on the oil pan to the rear cover are installed or you risk breaking the cover. I know because I broke the cover.
Great video. Need this done on my 2018 e63s at 40k miles. Design flaw likely. Mb wants $13k and indy shop wants $8k. This guy seemed to do it before lunch!
a good tech with "proper" tools....
Thanks!
Amazing thorough guide. Keep it up. Now my turn for my GL lol
Go for it. If you need guidance, don’t hesitate to in box me.
Impressive! I wish all techs would do the job right and not cut corners. This is how it should be.
Thanks! I've been in the business for so long I won't do that.
@@MercedesBenzTipsTricks God bless you, foreal.
@@johnabel5943 Thank you brother!
Hi, great video youre the master. Can I ask you to make some measurements of this Seal installer tool? Thanks
I didn't see if you had used any type of a gasket or sealant for the large I want to call it "backer plate". Was any applied and should there be some applied? Any time period of waiting before reinstalling?
Professional!
thank you
Thanks
❤❤👏👏👏excellent work
Thanks
Thanks!
Thank you for the video. What kind of tools did you use to press in place the seal?
Is it the same on a m278?
Can you buy a new seal housing with seal already installed and then just bolt the housing with seal or do you have to use the press tool the way you did it? Many thanks from the UK considering doing the job myself, ugh!
Yes.
Nice job. I need this done on my 2k E430. I do some DIY but this job is for the professional. Where's your garage located?
We’re located at Fremont California.Mercedes-Benz of Fremont
Thanks
Amazing work
Thanks you
Thanks
How do you unbolt and bolt on the converter to the fly wheel?
If you look from the engine side on the bet housing, you can see a cut out hole to access those bolts. Remove the cover and turn the engine by hand slowly, you could see those bolts.
Great work. How much time did it take? Is the process the same for a 1994 C280 W202?
It takes about 6 and half hours
Thanks! It depends on where you do the job. With proper tools and experience, it take 4 to 5 hours.
My mb dealer quoted me 30hrs. What a scam
You dont have to drain atf oil out when disassembling the transmission?
The rear main seal is on the engine, u just drop the tranny, dont disassemble it lol
Wait ure at a brnz dealer too? How tf is it all blue? The too boxes and shit, i know the one im at everything gotta be black, even personal toolboxes. And i also know they made sll dealers the.same, or have you guys not renovated yrt?
THanks
Yw
You’re welcome.
How muccj torqie for oil seal flywheel cover?
just use your finger and wet it around the lib of the seal
It'll be flushed after the repair.
Just curious, what is the cost of doing this service at Mercedes dealership vs. indy?
I have no clue on indy. Lol!
250$ an hour at least st the dealer
Dealer quoted me $13k, indy $8k. That's includes new PCV part too, but that's $150 part. Unbelivable