Despite all the negative comments and the too large holes in the pieces of metal , it's ingenious and if you have ever been to the Philippines where chinese tools cost 3 x more than in the USA (if you can find them ) , and needed to rivet something with pop rivets, this is pretty darn neat in a pinch !
Yep like all his other crap you could see them falling to the bottom of the hole when they snapped. Next week something you’ve never seen and can’t live without the wheel.
If you look at 4.16 the end of the rivet has been hit with a hammer to tighten the rivet in the hole. A totally useless tool, i dont know how Mr Suny thinks it is worth sharing on UA-cam.
yup its a scam because i tried and dosent work with 1/4 rivet atleast the pin break where the bend was made didn't even dent the aluminium (cover thingy)
@MLG overrated 7 i found a really good one (but for threaded types) ua-cam.com/video/qytqwTo81Vo/v-deo.html and for corners ua-cam.com/video/d1UNiTEAj40/v-deo.html
You need a way of having the slot in a collar which is "floating" on the threaded shaft to prevent the rivet rotating... should be an easy modification and much better results.. 😎👍☘🍺
Do you have extra iron pipe laying around, an angle grinder and a welder? If not, you could purchase rivet gun cheaper than likely any one of these(with the possible exception of the pipe), and it would likely work better. These can be had for under $20 at harbor freight before coupons. I believe they even have one for $10.
Totally agree bud. Gotta give a little credit for using his brain to come up with something like that but for Fuck sake....this is more like re-inventing the fucking wheel. A totally useless and sad waste of time. I think you can buy a shitty rivet gun at a dollar store and it would still do a better job. Lol. If all else fails, just go borrow your neighbours rivet gun. I guess people just simply like to make UA-cam videos. I wish I could send him a bill for my time for watching.
Não vi funcionalidade, pois ele torce e quebra a haste antes do rebite dar o aperto final deixando folgado, além disso ele corta o video após ele unir as peças, justamente para não mostrar que as peças ficam soltas, certamente ele bate após tirar da morsa para dar o aperto final, ferramenta inutil!🤔🤔
You could have made a brand new rivet out of one of your own finger bones after having chopped it off with another one of your "inventions" and it "still" probably would have been less trouble and less time than this thing you Frankensteined together for the most insignificant task.
quite clever. seems a few negative comments but what about the fun of making the tool, no one ever made a tool just for the fun of it instead of buying the correct tool?
@@gigibuzgure8178 Hola ,no entiendo el significado de "cantece", mi comentario fue porque el uso que se le da a los remaches siempre se hace para sujetar un elemento a otro y quede fijo ,u no para que se mueva ,al menos que quieres que gire y no colocarle tornillos y tuerca y contra tuerca para dejar esos elementos sueltos como para que giren ,que no serían seguros con el remache porque se terminaría saliendo ,Bu3no pero esa palabra nose como darle uso ,o es como decimos en argentina caguece por decir que se embrome por no sabre algo o que le paso algo por no saber? Después contestame gracias
Rivet installing tools use leverage rather than power and done less than a second AND you are twisting the nail instead of pulling it straight back most of energy is transferred to the twist as you can see the head is not fully secured. I would rather bend the nail and use a nail remover if I don’t have a right tool
All that and it literally doesn't do the thing it's built to do. A rivet is not meant to be loose like that. It's twisting and breaking the center pin when it needs to be pulling it. Such a waste of time, and wtf is with the dub step music?
I Tried it , but Not working in proper way, Rivot gun is Better but Technic Method was Is Good to Try. May be I couldn't fabricate in 100 percent Accuracy......
Clever idea, but not worth the hassle. Clearly see that the rivet finish is awful, and it didn't even pinch properly. Save yourself the energy, and buy a cheap rivet gun instead. Better yet, buy a high quality one.
Do you cover your camera lens when filming all those sparks? Great way to ruin any glass surface. But yeah, as others have said, this tool is useless and does a crappy job. Just go spend 40 bucks on a HF pneumatic rivet gun and call it a day.
If only I had these instructions and 10 hours to spare, this would have come in handy during the rivet gun shortage of '08.
I remember that time... I was barely able to hold it together ... 😭
thanx
I heard rivet guns are cheaper and more efficient and effective. I heard from me.
ua-cam.com/video/gTldm0ZexAg/v-deo.html
Despite all the negative comments and the too large holes in the pieces of metal , it's ingenious and if you have ever been to the Philippines where chinese tools cost 3 x more than in the USA (if you can find them ) , and needed to rivet something with pop rivets, this is pretty darn neat in a pinch !
Worse than a proper pop rivet gun, rivets aren't being fully tightened. A lot of work & time wasted
Yep like all his other crap you could see them falling to the bottom of the hole when they snapped. Next week something you’ve never seen and can’t live without the wheel.
Mp ju ce janbon
indeed i never heard of it, i hope i never hear of it again.
I guess I need to decide whether a welder would be cheaper than just buying a rivet gun, good idea if you already have all the necessary equipment.
If you look at 4.16 the end of the rivet has been hit with a hammer to tighten the rivet in the hole. A totally useless tool, i dont know how Mr Suny thinks it is worth sharing on UA-cam.
yup its a scam because i tried and dosent work with 1/4 rivet atleast
the pin break where the bend was made
didn't even dent the aluminium (cover thingy)
robert till 4:16
@MLG overrated 7 i found a really good one (but for threaded types) ua-cam.com/video/qytqwTo81Vo/v-deo.html
and for corners ua-cam.com/video/d1UNiTEAj40/v-deo.html
Excelente muy creativa esta herramienta.
Thats great idea bro
thank you my frend
Very nice, my friend. Have a wonderful day.❤️lIKE989
Miss Destruction j.
Cool drill chuck
What good is it? Another useless tool that no one would find a purpose for.
ua-cam.com/video/gTldm0ZexAg/v-deo.html
You need a way of having the slot in a collar which is "floating" on the threaded shaft to prevent the rivet rotating... should be an easy modification and much better results..
😎👍☘🍺
its just like a knackered riveter
Nice work!
very nice
Nice work !!!
Good nice👍
Good idea
Cara. Sinto muito. Mas se girar a aste do rebite ele parte antes. Não fica bom.
Cool
I guess if I don't have a rivet gun, and lots of other tools and time, this might be an option.
Do you have extra iron pipe laying around, an angle grinder and a welder? If not, you could purchase rivet gun cheaper than likely any one of these(with the possible exception of the pipe), and it would likely work better. These can be had for under $20 at harbor freight before coupons. I believe they even have one for $10.
ua-cam.com/video/gTldm0ZexAg/v-deo.html
And do you ever make a RIVNUT TOOL Mr Suny ? It's very useful .
Or you could just use a rivet gun !
Why not just buy a rivet gun.
Rotacionando o rebite, quebra antes do torque final. Não ficou bom!
How strong is the hold please
ua-cam.com/video/gTldm0ZexAg/v-deo.html
Thoughtful but holyshit get a rivet gun!
Totally agree bud. Gotta give a little credit for using his brain to come up with something like that but for Fuck sake....this is more like re-inventing the fucking wheel. A totally useless and sad waste of time. I think you can buy a shitty rivet gun at a dollar store and it would still do a better job. Lol. If all else fails, just go borrow your neighbours rivet gun. I guess people just simply like to make UA-cam videos. I wish I could send him a bill for my time for watching.
Good tool
Muito interessante
s.o.s para seu lar hello have a nice day ❤️
Não vi funcionalidade, pois ele torce e quebra a haste antes do rebite dar o aperto final deixando folgado, além disso ele corta o video após ele unir as peças, justamente para não mostrar que as peças ficam soltas, certamente ele bate após tirar da morsa para dar o aperto final, ferramenta inutil!🤔🤔
@@nandofersan6215 nada como rebitador tradicional ✌
@@nandofersan6215 comprar uma rebitadeira sairia mais barato...
You could have made a brand new rivet out of one of your own finger bones after having chopped it off with another one of your "inventions" and it "still" probably would have been less trouble and less time than this thing you Frankensteined together for the most insignificant task.
LOL
👍
quite clever. seems a few negative comments but what about the fun of making the tool, no one ever made a tool just for the fun of it instead of buying the correct tool?
Good
Your creativity is great 👍
Hi everyone’s have a good day ❤️❤️❤️
wated, no no no, i dont know order of what is the worst
the noise, thewaste of time , or the bad job this do
Verdadeira Gambiarra.
A very okay film, this is. It tells a lot of how to NOT do it.
Con lo baratas y practicas que son las remachadoras. No vale la pena fabricar algo asi
Good job
thank you BOOS
Essa foi uma das melhores invenções que já vir botei foi fé agora
Самоделка из канала авто класс!!!
Точно. 🙂
Друг у другу пиздят идеи
@@den_polansky , непонятно, зачем городить огород, если есть заклепочник
Eso sirve para hacer tijeras y bisagras ,pero no para anclar una cosa con otra queda suelto el remache
Luis Garay cantece
@@gigibuzgure8178 Hola ,no entiendo el significado de "cantece", mi comentario fue porque el uso que se le da a los remaches siempre se hace para sujetar un elemento a otro y quede fijo ,u no para que se mueva ,al menos que quieres que gire y no colocarle tornillos y tuerca y contra tuerca para dejar esos elementos sueltos como para que giren ,que no serían seguros con el remache porque se terminaría saliendo ,Bu3no pero esa palabra nose como darle uso ,o es como decimos en argentina caguece por decir que se embrome por no sabre algo o que le paso algo por no saber? Después contestame gracias
Click bait video. How the heck chooses this music?
Доктор Дью взываю. Такая лажа, видно что ее обрывает раньше чем она прижмет материал
Big project do small thing ?
Muito bom
Rivet installing tools use leverage rather than power and done less than a second AND you are twisting the nail instead of pulling it straight back most of energy is transferred to the twist as you can see the head is not fully secured.
I would rather bend the nail and use a nail remover if I don’t have a right tool
Wait till I show my pops this invention... his name is pop rivet
.
Brava
Проблема клепник купить. И удобней и быстрей в роботе.
saiu mais caro que comprar uma rebitadeira...
Good (mr suny)
Why not just go out and buy a blind rivet drill adaptor?
wish I had that 4:46 back
You're spinning the rivet in the hole. It's not tight.
10/10 Very good, thats what they used for the Titanic. 👌
(😏)
ghetto riveter, doesn't work
👍👍💯💯👏👏🇧🇷🇧🇷
I never heard about this tool and I don't want to here about it!!!!!!!!!!!
its very helpfull when working with big rivet... .
just add little bender jig to make hook the rivet pin.
Buy a rivet gun ffs
excelent ,, !
must bend a rivet nail every time to use? that stupid
gonna have to call nonsense on this one..
All that and it literally doesn't do the thing it's built to do. A rivet is not meant to be loose like that. It's twisting and breaking the center pin when it needs to be pulling it. Such a waste of time, and wtf is with the dub step music?
All this pressed rivets are very bad, if a Rivet is pressed, the material that is viveted shouldn't move at all.
Súper 👌
ua-cam.com/video/gTldm0ZexAg/v-deo.html
DIY
who the fuck uses a vernier as s scribe!
Он у тебя некорректно работает
ua-cam.com/video/gTldm0ZexAg/v-deo.html
Try doing professional work with it ..
I Tried it , but Not working in proper way, Rivot gun is Better but Technic Method was Is Good to Try. May be I couldn't fabricate in 100 percent Accuracy......
Certainly cant work in a tight space!
بدل هذا استخدم تونك
legal
Es más fácil con la Rivet Gun
best joke ever
This looks like another tool with an annoying soundtrack that doesn't work.
Que porcaria não arrebita direto kkkkk
Kayak nya kurang maksimal hasilnya
Gambiarra
Patent the design quick.. Otherwise someone with copy, and mass produce it and sell it for $200s lol
Clever idea, but not worth the hassle. Clearly see that the rivet finish is awful, and it didn't even pinch properly. Save yourself the energy, and buy a cheap rivet gun instead. Better yet, buy a high quality one.
OOOOOOR Just buy a Rivit Gun...
то хомутатель , теперь клепальник на всех каналах, это что плагиатом по пахивает или уже по ванивает
Perfect rubbish that you never heard about 🤭🤭🤭🤭
Just funny.... We rip it gan
Why
Vrhunski... ;)
tá de brincadeira, perdi meu tempo
You're kidding, I wasted my time
This should not exist at all
Rivet is 10.00 at harbor freight!
This really POORS
Coisa besta...o alicate p arribit fax a mesma coisa e n gasta energia
it's not riveted entirely so, no thumb up this time. Sorry
Rivet gun 5 dollars 😀😄
Do you cover your camera lens when filming all those sparks? Great way to ruin any glass surface. But yeah, as others have said, this tool is useless and does a crappy job. Just go spend 40 bucks on a HF pneumatic rivet gun and call it a day.
esos remaches estan flojos
Stupid idea. Just buy a riveter.